RAS Connection
Applies To: Windows Server 2008
A server running Routing and Remote Access provides two different types of remote access connectivity: virtual private networking (VPN) and dial-up networking. VPN is the creation of secured, point-to-point connections across a private network or a public network, such as the Internet. A VPN client uses special TCP/IP-based protocols called tunneling protocols to make a virtual call to a virtual port on a VPN server. In dial-up networking, a remote access client makes a nonpermanent, dial-up connection to a physical port on a remote access server by using the service of a telecommunications provider, such as analog phone or ISDN. In contrast to dial-up networking, VPN is always a logical, indirect connection between the VPN client and the VPN server over a public network, such as the Internet.
Events
| Event ID | Source | Message |
|---|---|---|
RemoteAccess |
Cannot receive initial frame on port: %1 because of the following error: %2 The user has been disconnected. | |
RemoteAccess |
The user: %1 has connected and failed to authenticate on port: %2. The line has been disconnected. | |
RemoteAccess |
The user connected to port: %1 has been disconnected because the authentication process did not complete within the required amount of time. | |
RemoteAccess |
The user: %1 connected to port: %2 has been disconnected because no network protocols were successfully negotiated. | |
RemoteAccess |
The following error occurred in the Point-to-Point Protocol (PPP) module on port: %1, UserName: %2. | |
RemoteAccess |
The password for user: %1\%2 connected on port: %3 has expired. The line has been disconnected. | |
RemoteAccess |
The account for user: %1\%2 connected on port: %3 has expired. The line has been disconnected. | |
RemoteAccess |
The account for user: %1\%2 connected on port: %3 does not have remote access privilege. The line has been disconnected. | |
RemoteAccess |
The attempt to call back user: %1 on port: %2 at: %3 failed because of the following error: %4 | |
RemoteAccess |
The user: %1 has connected and failed to authenticate with a third party on port: %2. The line has been disconnected. | |
RemoteAccess |
The user connected to port: %1 has been disconnected because the following internal authentication error occurred in the third-party security module: %2 | |
RemoteAccess |
Cannot receive initial data on port: %1 because of the following error: %2. The user has been disconnected. | |
RemoteAccess |
The user was autheticated as: %1 by the third-party security host module but was authenticated as: %2 by remote access security. The user has been disconnected. | |
RemoteAccess |
Unable to open the port: %1 for use. %2 | |
RemoteAccess |
Cannot recognize initial frame received on port: %1. The line has been disconnected. | |
RemoteAccess |
An error occurred in the Point-to-Point Protocol (PPP) module on port: %1 while trying to initiate a connection. %2 | |
RemoteAccess |
The user: %1, attempting to connect on: %2, was disconnected because of the following reason: %3 | |
RemoteAccess |
The user: %1 has been disconnected on port: %2. %3 | |
RemoteAccess |
CoID=%1: The user %2 dialed a connection named %3 which has terminated. The reason code returned on termination is %4. | |
RemoteAccess |
CoID=%1: The user %2 dialed a connection named %3 which has failed. The error code returned on failure is %4. | |
RemoteAccess |
Cannot receive initial frame on port: %1 because of the following error: %2 The user has been disconnected. | |
RemoteAccess |
CoID=%1: The user connected to port %2 has been disconnected due to inactivity. | |
RemoteAccess |
CoID=%1: The user %2 has connected and failed to authenticate on port %3. The line has been disconnected. | |
RemoteAccess |
The user connected to port: %1 has been disconnected because the authentication process did not complete within the required amount of time. | |
RemoteAccess |
The user: %1 connected to port: %2 has been disconnected because no network protocols were successfully negotiated. | |
RemoteAccess |
The following error occurred in the Point-to-Point Protocol (PPP) module on port: %1, UserName: %2. | |
RemoteAccess |
The password for user: %1\%2 connected on port: %3 has expired. The line has been disconnected. | |
RemoteAccess |
The account for user: %1\%2 connected on port: %3 has expired. The line has been disconnected. | |
RemoteAccess |
The account for user: %1\%2 connected on port: %3 does not have remote access privilege. The line has been disconnected. | |
RemoteAccess |
The attempt to call back user: %1 on port: %2 at: %3 failed because of the following error: %4 | |
RemoteAccess |
Cannot receive initial data on port: %1 because of the following error: %2. The user has been disconnected. | |
RemoteAccess |
A user was unable to connect on port: %1. No more connections can be made to this remote computer because the computer has exceeded its client license limit. | |
RemoteAccess |
Cannot recognize initial frame received on port: %1. The line has been disconnected. | |
RemoteAccess |
The user: %1, attempting to connect on: %2, was disconnected because of the following reason: %3 | |
RemoteAccess |
The user: %1 has been disconnected on port: %2. %3 | |
RemoteAccess |
CoId=%1: Layer=%2: SubLayer=%3: The connection attempt failed on port: %4 because of the authentication protocol selected. Check to see if the authentication protocol is supported in the operating systems at the client and server ends of the connection |