Security Bulletin

Microsoft Security Bulletin MS05-015 - Critical

Published: February 08, 2005 | Updated: March 08, 2005

Version: 1.2

Issued: February 8, 2005
Updated: March 8, 2005
Version: 1.2

Summary

Who should read this document: Customers who use Microsoft Windows

Impact of Vulnerability: Remote Code Execution

Maximum Severity Rating: Critical

Recommendation: Customers should apply the update immediately.

Security Update Replacement: None

Caveats: None

Tested Software and Security Update Download Locations:

Affected Software:

  • Microsoft Windows 2000 Service Pack 3 and Microsoft Windows 2000 Service Pack 4 - Download the update
  • Microsoft Windows XP Service Pack 1 and Microsoft Windows XP Service Pack 2 - Download the update
  • Microsoft Windows XP 64-Bit Edition Service Pack 1 (Itanium) - Download the update
  • Microsoft Windows XP 64-Bit Edition Version 2003 (Itanium) - Download the update
  • Microsoft Windows Server 2003 - Download the update
  • Microsoft Windows Server 2003 for Itanium-based Systems - Download the update
  • Microsoft Windows 98, Microsoft Windows 98 Second Edition (SE), and Microsoft Windows Millennium Edition (ME)

The software in this list has been tested to determine whether the versions are affected. Other versions either no longer include security update support or may not be affected. To determine the support life cycle for your product and version, visit the Microsoft Support Lifecycle Web site.

General Information

Executive Summary

Executive Summary:

This update resolves a newly-discovered, privately reported vulnerability. The vulnerability is documented in the “Vulnerability Details” section of this bulletin.

If a user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

We recommend that customers apply the update immediately.

Severity Ratings and Vulnerability Identifiers:

Vulnerability Identifiers Impact of Vulnerability Windows 98, 98 SE, ME Windows 2000 Windows XP Windows Server 2003
Hyperlink Object Library Vulnerability - CAN-2005-0057 Remote Code Execution Critical Critical Critical Critical

This assessment is based on the types of systems that are affected by the vulnerability, their typical deployment patterns, and the effect that exploiting the vulnerability would have on them.

How does the extended support for Windows 98, Windows 98 Second Edition, and Windows Millennium Edition affect the release of security updates for these operating systems?
Microsoft will only release security updates for critical security issues. Non-critical security issues are not offered during this support period. For more information about the Microsoft Support Lifecycle policies for these operating systems, visit the following Web site. For more information about severity ratings, visit the following Web site.

Are Windows 98, Windows 98 Second Edition, or Windows Millennium Edition critically affected by any of the vulnerabilities that are addressed in this security bulletin?
Yes. Windows 98, Windows 98 Second Edition, and Windows Millennium Edition are critically affected by this vulnerability. A Critical security update for these platforms is available and is provided as part of this security bulletin and can be downloaded only from the Windows Update Web site. For more information about severity ratings, visit the following Web site.

Note Updates for localized versions of Microsoft Windows 98 and Microsoft Windows 98 Second Edition that are not supported by Windows Update are available for download at the following download locations:

Note In the future, automatic e-mail notifications will be provided when these security updates are released. To receive these notifications, subscribe to the Microsoft Security Notification Service: Comprehensive Version.

Extended security update support for Microsoft Windows NT 4.0 Workstation Service Pack 6a and Windows 2000 Service Pack 2 ended on June 30, 2004. Extended security update support for Microsoft Windows NT 4.0 Server Service Pack 6a ended on December 31, 2004. I’m still using one of these operating systems, what should I do?
Windows NT 4.0 Workstation Service Pack 6a, Windows NT 4.0 Server Service Pack 6a, and Windows 2000 Service Pack 2 have reached the end of their life cycles. It should be a priority for customers who have these operating system versions to migrate to supported versions to prevent potential exposure to vulnerabilities. For more information about the Windows Product Lifecycle, visit the following Microsoft Support Lifecycle Web site. For more information about the extended security update support period for these operating system versions, visit the Microsoft Product Support Services Web site. Customers who require additional support for Windows NT 4.0 SP6a must contact their Microsoft account team representative, their Technical Account Manager, or the appropriate Microsoft partner representative for custom support options. Customers without an Alliance, Premier, or Authorized Contract can contact their local Microsoft sales office. For contact information, visit the Microsoft Worldwide Information Web site, select the country, and then click Go to see a list of telephone numbers. When you call, ask to speak with the local Premier Support sales manager. For more information, see the Windows Operating System Product Support Lifecycle FAQ.

Can I use the Microsoft Baseline Security Analyzer (MBSA) to determine whether this update is required?
Yes. MBSA will determine whether this update is required. For more information about MBSA, visit the MBSA Web site

Note After April 20, 2004, the Mssecure.xml file that is used by MBSA 1.1.1 and earlier versions is no longer being updated with new security bulletin data. Therefore, scans that are performed after that date by using MBSA 1.1.1 or earlier will be incomplete. All users should upgrade to MBSA 1.2 because it provides more accurate security update detection and supports additional products. Users can download MBSA 1.2.1 from the MBSA Web site. For more information about MBSA support, visit the following Microsoft Baseline Security Analyzer (MBSA) 1.2.1 Q&A; Web site.

Can I use Systems Management Server (SMS) to determine whether this update is required?
Yes. SMS can help detect and deploy this security update. For information about SMS, visit the SMS Web site.

The Security Update Inventory Tool is required for detecting Microsoft Windows and other affected Microsoft products. For more information about the limitations of the Security Update Inventory Tool, see Microsoft Knowledge Base Article 306460

Vulnerability Details

A remote code execution vulnerability exists in the Hyperlink Object Library. This problem exists because of an unchecked buffer while handling hyperlinks. An attacker could exploit the vulnerability by constructing a malicious hyperlink which could potentially lead to remote code execution if a user clicks a malicious link within a Web site or e-mail message. An attacker who successfully exploited this vulnerability could take complete control of the affected system. User interaction is required to exploit this vulnerability.

  • In a Web-based attack scenario, an attacker would have to host a Web site that contains a Web page that is used to exploit this vulnerability. An attacker could also attempt to compromise a Web site to have it display a Web page with malicious content. An attacker would have no way to force users to click on the malicious link. After they click the link, they would be prompted to perform several actions. An attack could only occur after they performed these actions.
  • An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
  • The vulnerability could not be exploited automatically through e-mail. For an attack to be successful, a user must click on a link within an e-mail message.
  • Customers running Microsoft ISA 2004 as their web proxy are at less risk from this vulnerability, as ISA 2004 rejects the URL in question when handling proxy client requests if any “Request URL” based HTTP Filter Signature definition exists. For information on HTTP Filtering in ISA 2004, visit the Microsoft TechNet Web site.

Microsoft has tested the following workaround. While this workaround will not correct the underlying vulnerability, it will help block known attack vectors.

  • Read e-mail messages in plain text format if you are using Outlook 2002 or a later version, or Outlook Express 6 SP1 or a later version, to help protect yourself from the HTML e-mail attack vector.
    Microsoft Outlook 2002 users who have applied Office XP Service Pack 1 or a later version and Microsoft Outlook Express 6 users who have applied Internet Explorer 6 Service Pack 1 or a later version can enable this setting and view e-mail messages that are not digitally signed or e-mail messages that are not encrypted in plain text only.

    Digitally signed e-mail messages or encrypted e-mail messages are not affected by the setting and may be read in their original formats. For more information about how to enable this setting in Outlook 2002, see Microsoft Knowledge Base Article 307594.

    For information about this setting in Outlook Express 6, see Microsoft Knowledge Base Article 291387.

    Impact of Workaround: E-mail messages that are viewed in plain text format will not contain pictures, specialized fonts, animations, or other rich content. Additionally:

    • The changes are applied to the preview pane and to open messages.
    • Pictures become attachments so that they are not lost.
    • Because the message is still in Rich Text or HTML format in the store, the object model (custom code solutions) may behave unexpectedly.

What is the scope of the vulnerability?
If a user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

What causes the vulnerability?
An unchecked buffer in the Hyperlink Object Library.

What is the Hyperlink Object Library?
The Hyperlink Object Library is a collection of application programming interfaces. These interfaces which provide functionality to software developers for handling hyperlinks. For more information about hyperlinks, see the product documentation.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could take complete control of the affected system.

How could an attacker exploit the vulnerability?
An attacker could exploit the vulnerability by creating a specially crafted link . After which, the attacker would need to entice the user into clicking the malicious link within a Web site or e-mail message. An attacker could also access the affected component through another vector. For example, an attacker could log on to the system interactively or by using another program that passes parameters to the vulnerable component (locally or remotely).

What systems are primarily at risk from the vulnerability?
Workstations and terminal servers are primarily at risk. Servers could be at more risk if users who do not have sufficient administrative permissions are given the ability to log on to servers and to run programs. However, best practices strongly discourage allowing this.

What does the update do?
The update removes the vulnerability by modifying the way that the Hyperlink Object Library validates the length of a message before it passes the message to the allocated buffer.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly disclosed when this security bulletin was originally issued.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers and had not seen any examples of proof of concept code published when this security bulletin was originally issued

Security Update Information

Affected Software:

For information about the specific security update for your affected software, click the appropriate link:

Windows Server 2003 (all versions)

Prerequisites This security update requires a release version of Windows Server 2003.

Inclusion in Future Service Packs: The update for this issue will be included in Windows Server 2003 Service Pack 1.

Installation Information

This security update supports the following setup switches:

/help                 Displays the command-line options

Setup Modes

/quiet            Quiet mode (no user interaction or display)

/passive            Unattended mode (progress bar only)

/uninstall          Uninstalls the package

Restart Options

/norestart          Do not restart when installation has completed

/forcerestart      Restart after installation

Special Options

/l                        Lists installed Windows hotfixes or update packages

/o                       Overwrite OEM files without prompting

/n                       Do not backup files needed for uninstall

/f                        Force other programs to close when the computer shuts down

/integrate:path  Integrates the update into the Windows source files located at the path specified.

/extract             Extracts files without starting the Setup program

Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841. For more information about the Update.exe installer, visit the Microsoft TechNet Web site.

Deployment Information

To install the security update without any user intervention, use the following command at a command prompt for Windows Server 2003:

Windowsserver2003-kb888113-x86-enu /passive /quiet

To install the security update without forcing the system to restart, use the following command at a command prompt for Windows Server 2003:

Windowsserver2003-kb888113-x86-enu /norestart

For information about how to deploy this security update by using Software Update Services, visit the Software Update Services Web site.

Restart Requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal Information

To remove this security update, use the Add or Remove Programs tool in Control Panel.

System administrators can also use the Spuninst.exe utility to remove this security update. The Spuninst.exe utility is located in the %Windir%\$NTUninstallKB888113$\Spuninst folder. The Spuninst.exe utility supports the following setup switches:

/help                 Displays the command line options

Setup Modes

/quiet            Quiet mode (no user interaction or display)

/passive            Unattended mode (progress bar only)

Restart Options

/norestart          Do not restart when installation is complete

/forcerestart      Restart after installation

Special Options

/f                        Force other programs to close when the computer shuts down

File Information

The English version of this security update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.

Microsoft Windows Server 2003, Web Edition; Microsoft Windows Server 2003, Standard Edition; Microsoft Windows Server 2003, Enterprise Edition; and Microsoft Windows Server 2003, Datacenter Edition:

File Name Version Date Time Size Folder
Hlink.dll 5.2.3790.225 12-Nov-2004 00:00 80,384 RTMGDR
Hlink.hp.dll 12-Nov-2004 00:00 2,560 RTMGDR
Hlink.dll 5.2.3790.227 12-Nov-2004 00:04 80,384 RTMQFE
Hlink.hp.dll 12-Nov-2004 00:04 2,560 RTMQFE

Microsoft Windows Server 2003, Standard x64 Edition; Microsoft Windows Server 2003, Enterprise x64 Edition; and Microsoft Windows Server 2003, Datacenter x64 Edition:

File Name Version Date Time Size CPU Folder
Hlink.dll 5.2.3790.225 12-Nov-2004 00:09 231,424 IA-64 RTMGDR
Whlink.dll 5.2.3790.225 12-Nov-2004 00:00 68,096 x86 RTMGDR\WOW
Hlink.dll 5.2.3790.227 12-Nov-2004 00:07 231,424 IA-64 RTMQFE
Whlink.dll 5.2.3790.227 12-Nov-2004 00:04 68,096 x86 RTMQFE\WOW

Note When you install this security update on Windows Server 2003, the installer checks to see if one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix. If you have previously installed a hotfix to update an affected file, the installer copies the RTMQFE files to your system. Otherwise, the installer copies the RTMGDR files to your system.

For more information about this behavior, see Microsoft Knowledge Base Article 824994.

For more information about the Update.exe installer, visit the Microsoft TechNet Web site.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer
    To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. MBSA allows administrators to scan local and remote systems for missing security updates and for common security misconfigurations. For more information about MBSA, visit the Microsoft Baseline Security Analyzer Web site.

  • File Version Verification
    Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

    1. Click Start, and then click Search.

    2. In the Search Results pane, click All files and folders under Search Companion.

    3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.

    4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.

      Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.

    5. On the Version tab, determine the version of the file that is installed on your computer by comparing it to the version that is documented in the appropriate file information table.

      Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.

  • Registry Key Verification
    You may also be able to verify the files that this security update has installed by reviewing the following registry keys.

    Windows Server 2003, Web Edition; Windows Server 2003, Standard Edition; Windows Server 2003, Enterprise Edition; Windows Server 2003, Datacenter Edition; Microsoft Windows Server 2003, Enterprise Edition for Itanium-based Systems; and Microsoft Windows Server 2003, Datacenter Edition for Itanium-based Systems:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows Server 2003\SP1\KB888113\Filelist

Windows XP (all versions)

Prerequisites This security update requires the release version Microsoft Windows XP. For more information, see Microsoft Knowledge Base Article 322389.

Inclusion in Future Service Packs: The update for this issue will be included in a future Service Pack or Update Rollup.

Installation Information

This security update supports the following setup switches:

/help                 Displays the command-line options

Setup Modes

/quiet            Quiet mode (no user interaction or display)

/passive            Unattended mode (progress bar only)

/uninstall          Uninstalls the package

Restart Options

/norestart          Do not restart when installation has completed

/forcerestart      Restart after installation

Special Options

/l                        Lists installed Windows hotfixes or update packages

/o                       Overwrite OEM files without prompting

/n                       Do not backup files needed for uninstall

/f                        Force other programs to close when the computer shuts down

/integrate:path  Integrates the update into the Windows source files located at the path specified.

/extract             Extracts files without starting the Setup program

Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841. For more information about the Update.exe installer, visit the Microsoft TechNet Web site.

Deployment Information

To install the security update without any user intervention, use the following command at a command prompt for Microsoft Windows XP:

Windowsxp-kb888113-x86-enu /passive /quiet

To install the security update without forcing the system to restart, use the following command at a command prompt for Windows XP:

Windowsxp-kb888113-x86-enu /norestart

For information about how to deploy this security update by using Software Update Services, visit the Software Update Services Web site.

Restart Requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal Information

To remove this security update, use the Add or Remove Programs tool in Control Panel.

System administrators can also use the Spuninst.exe utility to remove this security update. The Spuninst.exe utility is located in the %Windir%\$NTUninstallKB888113$\Spuninst folder. The Spuninst.exe utility supports the following setup switches:

/help                 Displays the command line options

Setup Modes

/quiet            Quiet mode (no user interaction or display)

/passive            Unattended mode (progress bar only)

Restart Options

/norestart          Do not restart when installation is complete

/forcerestart      Restart after installation

Special Options

/f                        Force other programs to close when the computer shuts down

File Information

The English version of this security update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.

Windows XP Home Edition Service Pack 1, Windows XP Professional Service Pack 1, Windows XP Tablet PC Edition, Windows XP Media Center Edition, Windows XP Home Edition Service Pack 2, Windows XP Professional Service Pack 2, Windows XP Tablet PC Edition 2005, and Windows XP Media Center Edition 2005:

File Name Version Date Time Size Folder
Hlink.dll 5.2.3790.227 16-Nov-2004 21:32 68,096 SP1QFE
Hlink.dll 5.2.3790.227 16-Nov-2004 21:17 68,096 SP2GDR
Hlink.dll 5.2.3790.227 16-Nov-2004 21:13 68,096 SP2QFE

Windows XP 64-Bit Edition Service Pack 1 (Itanium):

File Name Version Date Time Size CPU Folder
Hlink.dll 5.2.3790.227 21-Jan-2005 19:16 231,424 IA-64 SP1QFE
Whlink.dll 5.2.3790.227 21-Jan-2005 19:16 68,096 x86 SP1QFE\WOW

Windows XP 64-Bit Edition Version 2003 (Itanium):

File Name Version Date Time Size CPU Folder
Hlink.dll 5.2.3790.225 12-Nov-2004 00:09 231,424 IA-64 RTMGDR
Whlink.dll 5.2.3790.225 12-Nov-2004 00:00 68,096 x86 RTMGDR\WOW
Hlink.dll 5.2.3790.227 12-Nov-2004 00:07 231,424 IA-64 RTMQFE
Whlink.dll 5.2.3790.227 12-Nov-2004 00:04 68,096 x86 RTMQFE\WOW

Notes The Windows XP and Windows XP 64-Bit Edition Version 2003 (Itanium) versions of this security update are packaged as dual-mode packages. These dual-mode packages contain files for the original version of Windows XP Service Pack 1 (SP1) and files for Windows XP Service Pack 2 (SP2). For more information about dual-mode packages, see Microsoft Knowledge Base Article 328848. When you install this security update on Windows XP SP2 or on Windows XP 64-Bit Edition Version 2003 (Itanium), the installer checks to see if one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.

  • Windows XP SP2 The installer copies the SP2GDR files to your system.
  • Windows XP 64-Bit Edition Version 2003 (Itanium) The installer copies the RTMGDR files to your system.

For more information about this behavior, see Microsoft Knowledge Base Article 824994.

For more information about the Update.exe installer, visit the Microsoft TechNet Web site.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

Notes The Windows XP 64-Bit Edition Version 2003 (Itanium) version of this security update is packaged as a dual-mode package. Dual-mode packages contain files for the multiple versions of the affected operating system. For more information about dual-mode packages, see Microsoft Knowledge Base Article 328848. When you install this security update on Windows XP 64-Bit Edition Version 2003 (Itanium) the installer checks to see if any of the files that are being updated on your system have previously been updated by a Microsoft hotfix. If you have previously installed a hotfix to update one of these files, the installer copies the RTMQFE files to your system. Otherwise, the installer copies the RTMGDR files to your system.

For more information about this behavior, see Microsoft Knowledge Base Article 824994.

For more information about the Update.exe installer, visit the Microsoft TechNet Web site.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

Note For Windows XP 64-Bit Edition Version 2003 (Itanium), this security update is the same as the Windows Server 2003 for Itanium-based Systems security update.

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer
    To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. MBSA allows administrators to scan local and remote systems for missing security updates and for common security misconfigurations. For more information about MBSA, visit the Microsoft Baseline Security Analyzer Web site.

  • File Version Verification
    Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

    1. Click Start, and then click Search.

    2. In the Search Results pane, click All files and folders under Search Companion.

    3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.

    4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.

      Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.

    5. On the Version tab, determine the version of the file that is installed on your computer by comparing it to the version that is documented in the appropriate file information table.

      Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.

  • Registry Key Verification
    You may also be able to verify the files that this security update has installed by reviewing the following registry keys.

    For Windows XP Home Edition Service Pack 1, Windows XP Professional Service Pack 1, Windows XP Tablet PC Edition, Windows XP Media Center Edition, Windows XP Home Edition Service Pack 2, Windows XP Professional Service Pack 2, Windows XP Tablet PC Edition 2005, and Windows XP Media Center Edition 2005:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows XP\SP3\KB888113\Filelist

    For Windows XP 64-Bit Edition Version 2003 (Itanium):

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows Server 2003\SP1\KB888113\Filelist

    Note These registry keys may not contain a complete list of installed files. Also, these registry keys may not be created correctly if an administrator or an OEM integrates or slipstreams the 888113 security update into the Windows installation source files.

Windows 2000 (all versions)

Prerequisites For Windows 2000, this security update requires Service Pack 3 (SP3) or Service Pack 4 (SP4).

The software that is listed has been tested to determine whether the versions are affected. Other versions either no longer include security update support or may not be affected. To determine the support life cycle for your product and version, visit the Microsoft Support Lifecycle Web site.

For more information about how to obtain the latest service pack, see Microsoft Knowledge Base Article 260910.

Inclusion in Future Service Packs: The update for this issue will be included in a future Update Rollup.

Installation Information

This security update supports the following setup switches:

/help                 Displays the command-line options

Setup Modes

/quiet            Quiet mode (no user interaction or display)

/passive            Unattended mode (progress bar only)

/uninstall          Uninstalls the package

Restart Options

/norestart          Do not restart when installation has completed

/forcerestart      Restart after installation

Special Options

/l                        Lists installed Windows hotfixes or update packages

/o                       Overwrite OEM files without prompting

/n                       Do not backup files needed for uninstall

/f                        Force other programs to close when the computer shuts down

/integrate:path  Integrates the update into the Windows source files located at the path specified.

/extract             Extracts files without starting the Setup program

Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841. For more information about the Update.exe installer, visit the Microsoft TechNet Web site. For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

Deployment Information

To install the security update without any user intervention, use the following command at a command prompt for Windows 2000 Service Pack 3 and Windows 2000 Service Pack 4:

Windows2000-kb888113-x86-enu /passive /quiet

To install the security update without forcing the system to restart, use the following command at a command prompt for Windows 2000 Service Pack 3 and Windows 2000 Service Pack 4:

Windows2000-kb888113-x86-enu /norestart

For more information about how to deploy this security update with Software Update Services, visit the Software Update Services Web site.

Restart Requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal Information

To remove this security update, use the Add or Remove Programs tool in Control Panel.

System administrators can also use the Spuninst.exe utility to remove this security update. The Spuninst.exe utility is located in the %Windir%\$NTUninstallKB888113$\Spuninst folder. The Spuninst.exe utility supports the following setup switches:

/help                 Displays the command line options

Setup Modes

/quiet            Quiet mode (no user interaction or display)

/passive            Unattended mode (progress bar only)

Restart Options

/norestart          Do not restart when installation is complete

/forcerestart      Restart after installation

Special Options

/f                        Force other programs to close when the computer shuts down

File Information

The English version of this security update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.

Windows 2000 Service Pack 3 and Windows 2000 Service Pack 4:

File Name Version Date Time Size
Hlink.dll 5.2.3790.227 16-Nov-2004 10:37 68,096

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer
    To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. MBSA allows administrators to scan local and remote systems for missing security updates and for common security misconfigurations. For more information about MBSA, visit the Microsoft Baseline Security Analyzer Web site.

  • File Version Verification
    Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

    1. Click Start, and then click Search.

    2. In the Search Results pane, click All files and folders under Search Companion.

    3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.

    4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.
      Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.

    5. On the Version tab, determine the version of the file that is installed on your computer by comparing it to the version that is documented in the appropriate file information table.

      Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.

  • Registry Key Verification
    You may also be able to verify the files that this security update has installed by reviewing the following registry key:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows 2000\SP5\KB888113\Filelist

    Note This registry key may not contain a complete list of installed files. Also, this registry key may not be created correctly when an administrator or an OEM integrates or slipstreams the 888113 security update into the Windows installation source files.

Other Information

Acknowledgments

Microsoft thanks the following for working with us to help protect customers:

  • Anna Hollingzworth for reporting Hyperlink Object Library Vulnerability (CAN-2005-0057).

Obtaining Other Security Updates:

Updates for other security issues are available at the following locations:

Support:

  • Customers in the U.S. and Canada can receive technical support from Microsoft Product Support Services at 1-866-PCSAFETY. There is no charge for support calls that are associated with security updates.
  • International customers can receive support from their local Microsoft subsidiaries. There is no charge for support that is associated with security updates. For more information about how to contact Microsoft for support issues, visit the International Support Web site.

Security Resources:

Software Update Services:

By using Microsoft Software Update Services (SUS), administrators can quickly and reliably deploy the latest critical updates and security updates to Windows 2000 and Windows Server 2003-based servers, and to desktop systems that are running Windows 2000 Professional or Windows XP Professional.

For more information about how to deploy this security update by using Software Update Services, visit the Software Update Services Web site.

Systems Management Server:

Microsoft Systems Management Server (SMS) delivers a highly-configurable enterprise solution for managing updates. By using SMS, administrators can identify Windows-based systems that require security updates and can perform controlled deployment of these updates throughout the enterprise with minimal disruption to end users. For more information about how administrators can use SMS 2003 to deploy security updates, visit the SMS 2003 Security Patch Management Web site. SMS 2.0 users can also use Software Updates Service Feature Pack to help deploy security updates. For information about SMS, visit the SMS Web site.

Note SMS uses the Microsoft Baseline Security Analyzer and the Microsoft Office Detection Tool to provide broad support for security bulletin update detection and deployment. Some software updates may not be detected by these tools. Administrators can use the inventory capabilities of the SMS in these cases to target updates to specific systems. For more information about this procedure, visit the following Web site. Some security updates require administrative rights following a restart of the system. Administrators can use the Elevated Rights Deployment Tool (available in the SMS 2003 Administration Feature Pack and in the SMS 2.0 Administration Feature Pack) to install these updates.

Disclaimer:

The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.

Revisions:

  • V1.0 (February 8, 2005): Bulletin published
  • V1.1 (February 15, 2005): Mitigating factor for ISA 2004 updated.
  • V1.2 (March 8, 2005): Frequently Asked Questions updated to reflect Windows 98, 98SE and ME security update availability.

Built at 2014-04-18T13:49:36Z-07:00