Microsoft Security Bulletin MS06-006 - Critical

Vulnerability in Windows Media Player Plug-in with Non-Microsoft Internet Browsers Could Allow Remote Code Execution (911564)

Published: February 14, 2006 | Updated: October 10, 2007

Version: 1.1

Summary

Who should read this document: Customers who use a Microsoft Windows Media Player plug-in for non-Microsoft Internet browsers

Impact of Vulnerability: Remote Code Execution

Maximum Severity Rating: Important

Recommendation: Customers should apply the update at the earliest opportunity

Security Update Replacement: None

Caveats: Microsoft Knowledge Base Article 911564 documents the currently known issues that customers may experience when they install this security update. The article also documents recommended solutions for these issues.

Tested Software and Security Update Download Locations:

Affected Software:

Non-Affected Software:

  • Microsoft Windows Server 2003 for Itanium-based Systems and Microsoft Windows Server 2003 with SP1 for Itanium-based Systems
  • Microsoft Windows 98, Microsoft Windows 98 Second Edition (SE), and Microsoft Windows Millennium Edition (ME)

Note The security update for Microsoft Windows Server 2003 and Microsoft Windows Server 2003 Service Pack 1 also applies to Microsoft Windows Server 2003 R2.

The software in this list has been tested to determine whether the versions are affected. Other versions either no longer include security update support or may not be affected. To determine the support life cycle for your product and version, visit the Microsoft Support Lifecycle Web site.

General Information

Executive Summary

Executive Summary:

This update resolves a newly-discovered, privately-reported vulnerability. The vulnerability is documented in the "Vulnerability Details" section of this bulletin.

If a user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less affected than users who operate with administrative user rights.

We recommend that customers apply the update at the earliest opportunity

Severity Ratings and Vulnerability Identifiers:

Vulnerability Identifiers Impact of Vulnerability Windows 2000 Service Pack 4 Windows XP Service Pack 1 and Service Pack 2 Windows Server 2003 and Windows Server 2003 Service Pack 1
Windows Media Player Plug-in Vulnerability - CVE-2006-0005 Remote Code Execution\ Important\ Important Important

This assessment is based on the types of systems that are affected by the vulnerability, their typical deployment patterns, and the effect that exploiting the vulnerability would have on them.

Note The severity ratings for non-x86 operating system versions map to the x86 operating systems versions as follows:

  • The Microsoft Windows Server 2003 R2 Systems severity rating is the same as the Windows Server 2003 severity rating.
  • The Microsoft Windows XP Professional x64 Edition severity rating is the same as the Windows XP Service Pack 2 severity rating.
  • The Microsoft Windows Server 2003 x64 Edition severity rating is the same as the Windows Server 2003 Service Pack 1 severity rating.

Extended security update support for Microsoft Windows NT Workstation 4.0 Service Pack 6a and Windows 2000 Service Pack 2 ended on June 30, 2004. Extended security update support for Microsoft Windows NT Server 4.0 Service Pack 6a ended on December 31, 2004. Extended security update support for Microsoft Windows 2000 Service Pack 3 ended on June 30, 2005. I am still using one of these operating systems, what should I do?
Windows NT Workstation 4.0 Service Pack 6a, Windows NT Server 4.0 Service Pack 6a, Windows 2000 Service Pack 2, and Windows 2000 Service Pack 3 have reached the end of their life cycles. It should be a priority for customers who have these operating system versions to migrate to supported versions to prevent potential exposure to vulnerabilities. For more information about the Windows Product Lifecycle, visit the following Microsoft Support Lifecycle Web site. For more information about the extended security update support period for these operating system versions, visit the Microsoft Product Support Services Web site.
Customers who require custom support for these products must contact their Microsoft account team representative, their Technical Account Manager, or the appropriate Microsoft partner representative for custom support options. Customers without an Alliance, Premier, or Authorized Contract can contact their local Microsoft sales office. For contact information, visit the Microsoft Worldwide Information Web site, select the country, and then click Go to see a list of telephone numbers. When you call, ask to speak with the local Premier Support sales manager. For more information, see the Windows Operating System Product Support Lifecycle FAQ.

Can I use the Microsoft Baseline Security Analyzer (MBSA) 1.2.1 to determine whether this update is required?
Yes. MBSA 1.2.1 will determine whether this update is required. For more information about MBSA, visit the MBSA Web site.

Can I use the Microsoft Baseline Security Analyzer (MBSA) 2.0 to determine whether this update is required?
Yes. MBSA 2.0 will determine whether this update is required. MBSA 2.0 can detect security updates for products that Microsoft Update supports. For more information about MBSA, visit the MBSA Web site.

Can I use Systems Management Server (SMS) to determine whether this update is required?
Yes. SMS can help detect and deploy this security update. For information about SMS, visit the SMS Web site.
The Security Update Inventory Tool can be used by SMS for detecting security updates that are offered by Windows Update, that are supported by Software Update Services, and other security updates that are supported by MBSA 1.2.1. For more information about the Security Update Inventory Tool, see the following Microsoft Web site. For more information about the limitations of the Security Update Inventory Tool, see Microsoft Knowledge Base Article 306460.The SMS 2003 Inventory Tool for Microsoft Updates can be used by SMS for detecting security updates that are offered by Microsoft Update and that are supported by Windows Server Update Services. For more information about the SMS 2003 Inventory Tool for Microsoft Updates, see the following Microsoft Web site.

For more information about SMS, visit the SMS Web site.

Vulnerability Details

Windows Media Player Plug-in Vulnerability - CVE-2006-0005

A remote code execution vulnerability exists in the Windows Media Player plug-in for non-Microsoft Internet browsers because of the way the Windows Media Player plug-in handles a malformed EMBED element. An attacker could exploit the vulnerability by constructing a malicious EMBED element that could potentially allow remote code execution if a user visited a malicious Web site. An attacker who successfully exploited this vulnerability could take complete control of an affected system.

Mitigating Factors for Windows Media Player Plug-in Vulnerability - CVE-2006-0005:

  • Users who use Microsoft Windows Internet Explorer are not vulnerable to this issue.
  • In a Web-based attack scenario, an attacker would have to host a Web site that contains a Web page that is used to attempt to exploit this vulnerability. An attacker would have no way to force users to visit a malicious Web site. Instead, an attacker would have to persuade them to visit the Web site, typically by getting them to click a link that takes them to the attacker's site. It could also be possible to display malicious Web content by using banner advertisements or by using other methods to deliver Web content to affected systems.
  • An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less affected than users who operate with administrative user rights.

Workarounds for Windows Media Player Plug-in Vulnerability - CVE-2006-0005:

Microsoft has tested the following workarounds. While these workarounds will not correct the underlying vulnerability, they help block known attack vectors. When a workaround reduces functionality, it is identified in the following section.

  • Modify the Access Control List on the Npdsplay.dll file
    Modifying the Access Control List on the Npdsplay.dll file helps protect the affected system from attempts to exploit this vulnerability. To modify the Npdsplay.dll file, follow these steps.
    1. Click Start then click Run.
    2. Type cacls “%programfiles%\Windows Media Player\npdsplay.dll” /d everyone, and then click OK.

Note On x64 platforms use %programfiles(x86)% instead of %programfiles%.

Impact of Workaround: Web sites that attempt to play multimedia content using the non-standard EMBED element may fail to display properly in non-Microsoft Internet browsers. Sites that use the OBJECT element to display content are unaffected by this workaround.

FAQ for Windows Media Player Plug-in Vulnerability - CVE-2006-0005:

What is the scope of the vulnerability?
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could remotely take complete control of an affected system.

If a user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

What causes the vulnerability?
An unchecked buffer in the Windows Media Player plug-in.

What is the Windows Media Player plug-in?
The Windows Media Player plug-in allows users the ability to stream media through a non-Microsoft Internet browser.

Can the Windows Media Player plug-in be used from within Internet Explorer?
No, the Windows Media Player plug-in can only be used from within a non-Microsoft Internet browser such as Netscape Navigator.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could take complete control of the affected system.

Who could exploit the vulnerability?
In a Web-based attack scenario, an attacker would have to host a Web site that contains a Web page that is used to attempt to exploit this vulnerability. An attacker would have no way to force users to visit a malicious Web site. Instead, an attacker would have to persuade them to visit the Web site, typically by getting them to click a link that takes them to the attacker's site. It could also be possible to display malicious Web content by using banner advertisements or by using other methods to deliver Web content to affected systems.

What systems are primarily at risk from the vulnerability?
Workstations and terminal servers are primarily at risk. Servers could be at more risk if users who do not have sufficient administrative permissions are given the ability to log on to servers and to run programs. However, best practices strongly discourage allowing this.

What does the update do?
The update removes the vulnerability by modifying the way that Windows Media Player plug-in validates the length of a field before it passes it to the allocated buffer.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through responsible disclosure. Microsoft had not received any information to indicate that this vulnerability had been publicly disclosed when this security bulletin was originally issued.

Security Update Information

Affected Software:

For information about the specific security update for your affected software, click the appropriate link:

Windows Server 2003 (all versions)

Prerequisites
This security update requires Windows Server 2003 or Windows Server 2003 Service Pack 1.

Inclusion in Future Service Packs:
The update for this issue will be included in future Service Pack or Update Rollup.

Installation Information

This security update supports the following setup switches.

Switch Description
/help Displays the command-line options
Setup Modes
/passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart Does not restart when installation has completed
/forcerestart Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x] Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart Display a dialog box prompting the local user to allow a restart
Special Options
/overwriteoem Overwrites OEM files without prompting
/nobackup Does not back up files needed for uninstall
/forceappsclose Forces other programs to close when the computer shuts down
/log: path Allows the redirection of installation log files
/integrate:path Integrates the update into the Windows source files. These files are located at the path that is specified in the switch.
/extract[:path] Extracts files without starting the Setup program
/ER Enables extended error reporting
/verbose Enables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly.

Note You can combine these switches into one command. For backward compatibility, the security update also supports many of the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841. For more information about the Update.exe installer, visit the Microsoft TechNet Web site.

Deployment Information

To install the security update without any user intervention, use the following command at a command prompt for Windows Server 2003:

WindowsMedia-KB911564-x86-enu /quiet

Note Use of the /quiet switch will suppress all messages. This includes suppressing failure messages. Administrators should use one of the supported methods to verify the installation was successful when they use the /quiet switch. Administrators should also review the KB911564.log file for any failure messages when they use this switch.

To install the security update without forcing the system to restart, use the following command at a command prompt for Windows Server 2003:

WindowsMedia-KB911564-x86-enu /norestart

For information about how to deploy this security update by using Software Update Services, visit the Software Update Services Web site. For more information about how to deploy this security update using Windows Server Update Services, visit the Windows Server Update Services Web site. This security update will also be available through the Microsoft Update Web site.

Restart Requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal Information

To remove this update, use the Add or Remove Programs tool in Control Panel.

System administrators can also use the Spuninst.exe utility to remove this security update. The Spuninst.exe utility is located in the %Windir%\$NTUninstallKB911564$\Spuninst folder.

Switch Description
/help Displays the command-line options
Setup Modes
/passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart Does not restart when installation has completed
/forcerestart Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x] Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart Display a dialog box prompting the local user to allow a restart
Special Options
/forceappsclose Forces other programs to close when the computer shuts down
/log:path Allows the redirection of installation log files

File Information

The English version of this security update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.

Windows Server 2003, Web Edition; Windows Server 2003, Standard Edition; Windows Server 2003, Datacenter Edition; Windows Server 2003, Enterprise Edition; Windows Small Business Server 2003; Windows Server 2003, Web Edition with SP1; Windows Server 2003, Standard Edition with SP1; Windows Server 2003, Enterprise Edition with SP1; and Windows Server 2003, Datacenter Edition with SP1; Windows Server 2003 R2, Web Edition; Windows Server 2003 R2, Standard Edition; Windows Server 2003 R2, Datacenter Edition; Windows Server 2003 R2, Enterprise Edition; Windows Small Business Server 2003 R2:

File Name Version Date Time Size
Npdsplay.dll 3.0.2.629 30-Nov-2005 00:27 364,544

For more information about the Update.exe installer, visit the Microsoft TechNet Web site.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

    To verify that a security update has been applied to an affected system, you can use the Microsoft Baseline Security Analyzer (MBSA) tool. MBSA allows administrators to scan local and remote systems for missing security updates and for common security misconfigurations. For more information about MBSA, visit the Microsoft Baseline Security Analyzer Web site.

  • File Version Verification

    Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

    1. Click Start, and then click Search.
    2. In the Search Results pane, click All files and folders under Search Companion.
    3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
    4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties. Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
    5. On the Version tab, determine the version of the file that is installed on your computer by comparing it to the version that is documented in the appropriate file information table. Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
  • Registry Key Verification

    You may also be able to verify the files that this security update has installed by reviewing the following registry keys.

    Windows Server 2003, Web Edition; Windows Server 2003, Standard Edition; Windows Server 2003, Enterprise Edition; Windows Server 2003, Datacenter Edition; Windows Small Business Server 2003; Windows Server 2003, Enterprise Edition for Itanium-based Systems; Windows Server 2003, Datacenter Edition for Itanium-based Systems; Windows Server 2003, Web Edition with SP1; Windows Server 2003, Standard Edition with SP1; Windows Server 2003, Enterprise Edition with SP1; Windows Server 2003, Datacenter Edition with SP1;Windows Server 2003 R2, Web Edition; Windows Server 2003 R2, Standard Edition; Windows Server 2003 R2, Datacenter Edition; Windows Server 2003 R2, Enterprise Edition; Windows Small Business Server 2003 R2:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows Media Player\SP0\KB911564\Filelist

    Note This registry key may not contain a complete list of installed files. Also, this registry key may not be created correctly if an administrator or an OEM integrates or slipstreams the 911564 security update into the Windows installation source files.

Windows XP (all versions)

Prerequisites This security update requires Microsoft Windows XP Service Pack 1 or a later version. For more information, see Microsoft Knowledge Base Article 322389.

Inclusion in Future Service Packs: The update for this issue will be included in a future Service Pack or Update Rollup.

Installation Information

This security update supports the following setup switches.

Switch Description
/help Displays the command-line options
Setup Modes
/passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart Does not restart when installation has completed
/forcerestart Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x] Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart Display a dialog box prompting the local user to allow a restart
Special Options
/overwriteoem Overwrites OEM files without prompting
/nobackup Does not back up files needed for uninstall
/forceappsclose Forces other programs to close when the computer shuts down
/log:path Allows the redirection of installation log files
/integrate:path Integrates the update into the Windows source files. These files are located at the path that is specified in the switch.
/extract[:path] Extracts files without starting the Setup program
/ER Enables extended error reporting
/verbose Enables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly.

Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841. For more information about the Update.exe installer, visit the Microsoft TechNet Web site.

Deployment Information

To install the security update without any user intervention, use the following command at a command prompt for Microsoft Windows XP:

WindowsMedia-KB911564-x86-enu /quiet

Note Use of the /quiet switch will suppress all messages. This includes suppressing failure messages. Administrators should use one of the supported methods to verify the installation was successful when they use the /quiet switch. Administrators should also review the KB911564.log file for any failure messages when they use this switch.

To install the security update without forcing the system to restart, use the following command at a command prompt for Windows XP:

WindowsMedia-KB911564-x86-enu /norestart

For information about how to deploy this security update by using Software Update Services, visit the Software Update Services Web site. For more information about how to deploy this security update using Windows Server Update Services, visit the Windows Server Update Services Web site. This security update will also be available through the Microsoft Update Web site.

Restart Requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal Information

To remove this security update, use the Add or Remove Programs tool in Control Panel.

System administrators can also use the Spuninst.exe utility to remove this security update. The Spuninst.exe utility is located in the %Windir%\$NTUninstallKB911564$\Spuninst folder.

Switch Description
/help Displays the command-line options
Setup Modes
/passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart Does not restart when installation has completed
/forcerestart Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x] Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart Display a dialog box prompting the local user to allow a restart
Special Options
/forceappsclose Forces other programs to close when the computer shuts down
/log:path Allows the redirection of installation log files

File Information

The English version of this security update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.

Windows XP Home Edition Service Pack 1, Windows XP Professional Service Pack 1, Windows XP Tablet PC Edition, Windows XP Media Center Edition, Windows XP Home Edition Service Pack 2, Windows XP Professional Service Pack 2, Windows XP Tablet PC Edition 2005, and Windows XP Media Center Edition 2005:

File Name Version Date Time Size
Npdsplay.dll 3.0.2.629 30-Nov-2005 00:27 364,544

For more information about the Update.exe installer, visit the Microsoft TechNet Web site.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

    To verify that a security update has been applied to an affected system, you can use the Microsoft Baseline Security Analyzer (MBSA) tool. MBSA allows administrators to scan local and remote systems for missing security updates and for common security misconfigurations. For more information about MBSA, visit the Microsoft Baseline Security Analyzer Web site.

  • File Version Verification

    Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

    1. Click Start, and then click Search.
    2. In the Search Results pane, click All files and folders under Search Companion.
    3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
    4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties. Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
    5. On the Version tab, determine the version of the file that is installed on your computer by comparing it to the version that is documented in the appropriate file information table. Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
  • Registry Key Verification

    You may also be able to verify the files that this security update has installed by reviewing the following registry key.

    For Windows XP Home Edition Service Pack 1, Windows XP Professional Service Pack 1, Windows XP Tablet PC Edition, Windows XP Media Center Edition, Windows XP Home Edition Service Pack 2, Windows XP Professional Service Pack 2, Windows XP Tablet PC Edition 2005, and Windows XP Media Center Edition 2005:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows Media Player\SP0\KB911564\Filelist

    Note These registry key may not contain a complete list of installed files. Also, these registry keys may not be created correctly if an administrator or an OEM integrates or slipstreams the 911564 security update into the Windows installation source files.

Windows 2000 (all versions)

Prerequisites For Windows 2000, this security update requires Service Pack 4 (SP4). For Small Business Server 2000, this security update requires Small Business Server 2000 Service Pack 1a (SP1a) or Small Business Server 2000 running with Windows 2000 Server Service Pack 4 (SP4).

The software that is listed has been tested to determine whether the versions are affected. Other versions either no longer include security update support or may not be affected. To determine the support life cycle for your product and version, visit the Microsoft Support Lifecycle Web site.

For more information about how to obtain the latest service pack, see Microsoft Knowledge Base Article 260910.

Inclusion in Future Service Packs: The update for this issue may be included in a future Update Rollup.

Installation Information

This security update supports the following setup switches.

Switch Description
/help Displays the command-line options
Setup Modes
/passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart Does not restart when installation has completed
/forcerestart Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x] Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart Display a dialog box prompting the local user to allow a restart
Special Options
/overwriteoem Overwrites OEM files without prompting
/nobackup Does not back up files needed for uninstall
/forceappsclose Forces other programs to close when the computer shuts down
/log:path Allows the redirection of installation log files
/integrate:path Integrates the update into the Windows source files. These files are located at the path that is specified in the switch.
/extract[:path] Extracts files without starting the Setup program
/ER Enables extended error reporting
/verbose Enables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly.

Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841. For more information about the Update.exe installer, visit the Microsoft TechNet Web site. For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

Deployment Information

To install the security update without any user intervention, use the following command at a command prompt for Windows 2000 Service Pack 4:

WindowsMedia-KB911564-x86-enu /quiet

Note Use of the /quiet switch will suppress all messages. This includes suppressing failure messages. Administrators should use one of the supported methods to verify the installation was successful when they use the /quiet switch. Administrators should also review the KB911564.log file for any failure messages when they use this switch.

To install the security update without forcing the system to restart, use the following command at a command prompt for Windows 2000 Service Pack 4:

WindowsMedia-KB911564-x86-enu /norestart

For more information about how to deploy this security update with Software Update Services, visit the Software Update Services Web site. For more information about how to deploy this security update using Windows Server Update Services, visit the Windows Server Update Services Web site. This security update will also be available through the Microsoft Update Web site.

Restart Requirement

This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.

Removal Information

To remove this security update, use the Add or Remove Programs tool in Control Panel.

System administrators can also use the Spuninst.exe utility to remove this security update. The Spuninst.exe utility is located in the %Windir%\$NTUninstallKB911564$\Spuninst folder.

Switch Description
/help Displays the command-line options
Setup Modes
/passive Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart Does not restart when installation has completed
/forcerestart Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x] Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart Display a dialog box prompting the local user to allow a restart
Special Options
/forceappsclose Forces other programs to close when the computer shuts down
/log:path Allows the redirection of installation log files

File Information

The English version of this security update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.

Windows 2000 Service Pack 4 and Small Business Server 2000:

File Name Version Date Time Size
Npdsplay.dll 3.0.2.629 30-Nov-2005 00:27 364,544

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer

    To verify that a security update has been applied to an affected system, you can use the Microsoft Baseline Security Analyzer (MBSA) tool. MBSA allows administrators to scan local and remote systems for missing security updates and for common security misconfigurations. For more information about MBSA, visit the Microsoft Baseline Security Analyzer Web site.

  • File Version Verification

    Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

    1. Click Start, and then click Search.
    2. In the Search Results pane, click All files and folders under Search Companion.
    3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
    4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties. Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
    5. On the Version tab, determine the version of the file that is installed on your computer by comparing it to the version that is documented in the appropriate file information table. Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
  • Registry Key Verification

    You may also be able to verify the files that this security update has installed by reviewing the following registry key:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows Media Player\SP0\KB911564\Filelist

    Note This registry key may not contain a complete list of installed files. Also, this registry key may not be created correctly when an administrator or an OEM integrates or slipstreams the 911564 security update into the Windows installation source files.

Other Information

Acknowledgments

Microsoft thanks the following for working with us to help protect customers:

  • John Cobb of iDefense for reporting the Windows Media Player Plug-in Vulnerability - CVE-2006-0005.

Obtaining Other Security Updates:

Updates for other security issues are available at the following locations:

Support:

  • Customers in the U.S. and Canada can receive technical support from Microsoft Product Support Services at 1-866-PCSAFETY. There is no charge for support calls that are associated with security updates.
  • International customers can receive support from their local Microsoft subsidiaries. There is no charge for support that is associated with security updates. For more information about how to contact Microsoft for support issues, visit the International Support Web site.

Security Resources:

Software Update Services:

By using Microsoft Software Update Services (SUS), administrators can quickly and reliably deploy the latest critical updates and security updates to Windows 2000 and Windows Server 2003-based servers, and to desktop systems that are running Windows 2000 Professional or Windows XP Professional.

For more information about how to deploy security updates by using Software Update Services, visit the Software Update Services Web site.

Windows Server Update Services:

By using Windows Server Update Services (WSUS), administrators can quickly and reliably deploy the latest critical updates and security updates for Windows 2000 operating systems and later, Office XP and later, Exchange Server 2003, and SQL Server 2000 onto Windows 2000 and later operating systems.

For more information about how to deploy security updates using Windows Server Update Services, visit the Windows Server Update Services Web site.

Systems Management Server:

Microsoft Systems Management Server (SMS) delivers a highly-configurable enterprise solution for managing updates. By using SMS, administrators can identify Windows-based systems that require security updates and can perform controlled deployment of these updates throughout the enterprise with minimal disruption to end users. For more information about how administrators can use SMS 2003 to deploy security updates, visit the SMS 2003 Security Patch Management Web site. SMS 2.0 users can also use Software Updates Service Feature Pack to help deploy security updates. For information about SMS, visit the SMS Web site.

Note SMS uses the Microsoft Baseline Security Analyzer, the Microsoft Office Detection Tool, and the Enterprise Update Scanning Tool to provide broad support for security bulletin update detection and deployment. Some software updates may not be detected by these tools. Administrators can use the inventory capabilities of the SMS in these cases to target updates to specific systems. For more information about this procedure, visit the following Web site. Some security updates require administrative rights following a restart of the system. Administrators can use the Elevated Rights Deployment Tool (available in the SMS 2003 Administration Feature Pack and in the SMS 2.0 Administration Feature Pack) to install these updates.

Disclaimer:

The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.

Revisions:

  • V1.0 (February 14, 2006): Bulletin published.
  • V1.1 (October 10, 2007): Added Microsoft Knowledge Base Article 911564 to "Caveats" section which documents the currently known issues that customers may experience when they install this security update.

Built at 2014-04-18T13:49:36Z-07:00