Security Bulletin
Microsoft Security Bulletin MS06-045 - Critical
Vulnerability in Windows Explorer Could Allow Remote Code Execution (921398)
Published: August 08, 2006
Version: 1.0
Summary
Who should read this document: Customers who use Microsoft Windows
Impact of Vulnerability: Remote Code Execution
Maximum Severity Rating: Important
Recommendation: Customers should apply the update at the earliest opportunity.
Security Update Replacement: This bulletin replaces a prior security update. See the frequently asked questions (FAQ) section of this bulletin for the complete list.
Caveats: None
Tested Software and Security Update Download Locations:
Affected Software:
- Microsoft Windows 2000 Service Pack 4 - Download the update
- Microsoft Windows XP Service Pack 1 and Microsoft Windows XP Service Pack 2 - Download the update
- Microsoft Windows XP Professional x64 Edition - Download the update
- Microsoft Windows Server 2003 and Microsoft Windows Server 2003 Service Pack 1 - Download the update
- Microsoft Windows Server 2003 for Itanium-based Systems and Microsoft Windows Server 2003 with SP1 for Itanium-based Systems - Download the update
- Microsoft Windows Server 2003 x64 Edition - Download the update
The software in this list has been tested to determine whether the versions are affected. Other versions either no longer include security update support or may not be affected. To determine the support life cycle for your product and version, visit the Microsoft Support Lifecycle Web site.
Note The security updates for Microsoft Windows Server 2003, Windows Server 2003 Service Pack 1, and Windows Server 2003 x64 Edition also apply to Windows Server 2003 R2.
General Information
Executive Summary
Executive Summary:
This update resolves a newly-discovered, publicly-reported vulnerability. The vulnerability is documented in the "Vulnerability Details" section of this bulletin.
An attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.
If a user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
We recommend that customers apply the update immediately.
Severity Ratings and Vulnerability Identifiers:
Vulnerability Identifiers | Impact of Vulnerability | Windows 2000 | Windows XP Service Pack 1 | Windows XP Service Pack 2 | Windows Server 2003 | Windows Server 2003 Service Pack 1 |
---|---|---|---|---|---|---|
Folder GUID Code Execution Vulnerability - CVE-2006-3281 | Remote code execution | Important | Important | Important | Important | Important |
This assessment is based on the types of systems that are affected by the vulnerability, their typical deployment patterns, and the effect that exploiting the vulnerability would have on them.
Note The security updates for Windows Server 2003, Windows Server 2003 Service Pack 1, and Windows Server 2003 x64 Edition also apply to Windows Server 2003 R2.
Note The severity ratings for non-x86 operating system versions map to the x86 operating systems versions as follows:
- The Microsoft Windows XP Professional x64 Edition severity rating is the same as the Windows XP Service Pack 2 severity rating.
- The Microsoft Windows Server 2003 for Itanium-based Systems severity rating is the same as the Windows Server 2003 severity rating.
- The Microsoft Windows Server 2003 with SP1 for Itanium-based Systems severity rating is the same as the Windows Server 2003 Service Pack 1 severity rating.
- The Microsoft Windows Server 2003 x64 Edition severity rating is the same as the Windows Server 2003 Service Pack 1 severity rating.
Frequently Asked Questions (FAQ) Related to This Security Update
Extended security update support for Microsoft Windows 98, Windows 98 Second Edition, or Windows Millennium Edition ended on July 11, 2006. I am still using one of these operating systems; what should I do?
Windows 98, Windows 98 Second Edition, and Windows Millennium Edition have reached the end of their support life cycles. It should be a priority for customers who have these operating system versions to migrate to supported versions to prevent potential exposure to vulnerabilities. For more information about the Windows Product Lifecycle, visit the following Microsoft Support Lifecycle Web site. For more information about the extended security update support period for these operating system versions, visit the Microsoft Product Support Services Web site.
Extended security update support for Microsoft Windows NT Workstation 4.0 Service Pack 6a and Windows 2000 Service Pack 2 ended on June 30, 2004. Extended security update support for Microsoft Windows NT Server 4.0 Service Pack 6a ended on December 31, 2004. Extended security update support for Microsoft Windows 2000 Service Pack 3 ended on June 30, 2005. I am still using one of these operating systems; what should I do?
Windows NT Workstation 4.0 Service Pack 6a, Windows NT Server 4.0 Service Pack 6a, Windows 2000 Service Pack 2, and Windows 2000 Service Pack 3 have reached the end of their support life cycles. It should be a priority for customers who have these operating system versions to migrate to supported versions to prevent potential exposure to vulnerabilities. For more information about the Windows Product Lifecycle, visit the following Microsoft Support Lifecycle Web site. For more information about the extended security update support period for these operating system versions, visit the Microsoft Product Support Services Web site.
Customers who require custom support for these products must contact their Microsoft account team representative, their Technical Account Manager, or the appropriate Microsoft partner representative for custom support options. Customers without an Alliance, Premier, or Authorized Contract can contact their local Microsoft sales office. For contact information, visit the Microsoft Worldwide Information Web site, select the country, and then click Go to see a list of telephone numbers. When you call, ask to speak with the local Premier Support sales manager. For more information, see the Windows Operating System Product Support Lifecycle FAQ.
What updates does this release replace?
This security update replaces a prior security update. The security bulletin ID and affected operating systems are listed in the following table.
Bulletin ID | Windows 2000 | Windows XP Service Pack 1 | Windows XP Service Pack 2 | Windows Server 2003 | Windows Server 2003 Service Pack 1 |
---|---|---|---|---|---|
MS05-016 | Replaced | Replaced | Replaced | Replaced | Not Applicable |
Can I use the Microsoft Baseline Security Analyzer (MBSA) to determine whether this update is required?
The following table provides the MBSA detection summary for this security update.
Product | MBSA 1.2.1 | MBSA 2.0 |
---|---|---|
Microsoft Windows 2000 Service Pack 4 | Yes | Yes |
Microsoft Windows XP Service Pack 1 and Microsoft Windows XP Service Pack 2 | Yes | Yes |
Microsoft Windows XP Professional x64 Edition | No | Yes |
Microsoft Windows Server 2003 and Microsoft Windows Server 2003 Service Pack 1 | Yes | Yes |
Microsoft Windows Server 2003 for Itanium-based Systems and Microsoft Windows Server 2003 with Service Pack 1 for Itanium-based Systems | No | Yes |
Microsoft Windows Server 2003 x64 Edition family | No | Yes |
For more information about MBSA, visit the MBSA Web site. For more information about the programs that Microsoft Update and MBSA 2.0 currently do not detect, see Microsoft Knowledge Base Article 895660.
For more detailed information, see Microsoft Knowledge Base Article 910723.
Can I use Systems Management Server (SMS) to determine whether this update is required?
The following table provides the SMS detection summary for this security update.
Product | SMS 2.0 | SMS 2003 |
---|---|---|
Microsoft Windows 2000 Service Pack 4 | Yes | Yes |
Microsoft Windows XP Service Pack 1 and Microsoft Windows XP Service Pack 2 | Yes | Yes |
Microsoft Windows XP Professional x64 Edition | No | Yes |
Microsoft Windows Server 2003 and Microsoft Windows Server 2003 Service Pack 1 | Yes | Yes |
Microsoft Windows Server 2003 for Itanium-based Systems and Microsoft Windows Server 2003 with Service Pack 1 for Itanium-based Systems | No | Yes |
Microsoft Windows Server 2003 x64 Edition family | No | Yes |
SMS uses MBSA for detection. Therefore, SMS has the same limitation that is listed earlier in this bulletin related to programs that MBSA does not detect.
For SMS 2.0, the SMS SUS Feature Pack, which includes the Security Update Inventory Tool, can be used by SMS to detect security updates. SMS SUIT uses the MBSA 1.2.1 engine for detection. For more information about the Security Update Inventory Tool, visit the following Microsoft Web site. For more information about the limitations of the Security Update Inventory Tool, see Microsoft Knowledge Base Article 306460. The SMS SUS Feature Pack also includes the Microsoft Office Inventory Tool to detect required updates for Microsoft Office applications.
For SMS 2003, the SMS 2003 Inventory Tool for Microsoft Updates can be used by SMS to detect security updates that are offered by Microsoft Update and that are supported by Windows Server Update Services. For more information about the SMS 2003 Inventory Tool for Microsoft Updates, visit the following Microsoft Web site. SMS 2003 can also use the Microsoft Office Inventory Tool to detect required updates for Microsoft Office applications.
For more information about SMS, visit the SMS Web site.
For more detailed information, see Microsoft Knowledge Base Article 910723.
Vulnerability Details
Folder GUID Code Execution Vulnerability - CVE-2006-3281:
A remote code execution vulnerability exists in Windows Explorer because of the way that Windows Explorer handles Drag and Drop events. An attacker could exploit the vulnerability by constructing a malicious Web page that could potentially allow an attacker to save a file on the user’s system if a user visited a malicious Web site or viewed a malicious e-mail message. An attacker who successfully exploited this vulnerability could take complete control of an affected system. User interaction is required to exploit this vulnerability
Mitigating Factors for Folder GUID Code Execution Vulnerability - CVE-2006-3281:
- Firewall best practices and standard default firewall configurations can help protect networks from attacks that originate outside the enterprise perimeter. Best practices recommend that systems that are connected to the Internet have a minimal number of ports exposed.
- In a Web-based attack scenario, an attacker would have to host a Web site that contains a Web page that is used to exploit this vulnerability. An attacker would have no way to force users to visit a malicious Web site. Instead, an attacker would have to persuade them to visit the Web site, typically by getting them to click a link that takes them to the attacker's Web site. After they click the link, they would be prompted to perform several actions. An attack could only occur after they performed these actions.
- An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
- The Restricted sites zone helps reduce attacks that could try to exploit this vulnerability by preventing Active Scripting and ActiveX controls from being used when reading HTML e-mail. However, if a user clicks on a link within an e-mail they could still be vulnerable to this issue through the Web-based attack scenario described previously. By default, Outlook Express 6, Outlook 2002, and Outlook 2003 open HTML e-mail messages in the Restricted sites zone. Additionally, Outlook 98 and Outlook 2000 open HTML e-mail messages in the Restricted sites zone if the Outlook E-mail Security Update has been installed. Outlook Express 5.5 Service Pack 2 opens HTML e-mail messages in the Restricted sites zone if Microsoft Security Bulletin MS04-018 has been installed.
- The vulnerability could not be exploited automatically through e-mail. For an attack to be successful a user must open an attachment or click on a link that is sent in an e-mail message.
Workarounds for Folder GUID Code Execution Vulnerability - CVE-2006-3281:
Microsoft has tested the following workarounds. While these workarounds will not correct the underlying vulnerability, they help block known attack vectors. When a workaround reduces functionality, it is identified in the following section.
Disable the Web Client service
Disabling the Web Client service will help protect the affected system from attempts to exploit this vulnerability. To disable the Web Client service, follow these steps:- Click Start, and then click Control Panel. Alternatively, point to Settings, and then click Control Panel.
- Double-click Administrative Tools.
- Double-click Services.
- Double-click WebClient.
- In the Startup type list, click Disabled.
- Click Stop, and then click OK.
You can also stop and disable the Web Client service by using the following command at the command prompt:
sc stop WebClient & sc config WebClient start= disabled
Impact of Workaround: If the Web Client service is disabled, Web Distributed Authoring and Versioning (WebDAV) requests are not transmitted. If the Web Client service is disabled, any services that explicitly depend on the Web Client service will not start, and an error message will be logged in the System log. Windows Server 2003 users will not be able to use the "Open as Web Folder" functionality.
Use the Group Policy settings to disable the WebClient service on all affected systems that do not require this feature.
Because the Web Client service is a possible attack vector, disable the service by using the Group Policy settings. You can disable the startup of this service at either the local, site, domain, or organizational-unit level by using Group Policy object functionality in Windows 2000 domain environments or in Windows Server 2003 domain environments.Note You may also review the Windows Server 2003 Security Guide. This guide includes information about how to disable services.
For more information about Group Policy, visit the following Microsoft Web sites:
- Step-by-Step Guide to Understanding the Group Policy Feature Set
- Windows 2000 Group Policy
- Group Policy in Windows Server 2003
Impact of Workaround: If the Web Client service is disabled, Web Distributed Authoring and Versioning (WebDAV) requests are not transmitted. If the Web Client service is disabled, any services that explicitly depend on the Web Client service will not start, and an error message will be logged in the System log. Windows Server 2003 users will not be able to use the "Open as Web Folder" functionality.
Disable the file: protocol handler.
Note Using Registry Editor incorrectly can cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that problems resulting from the incorrect use of Registry Editor can be solved. Use Registry Editor at your own risk. For information about how to edit the registry, view the "Changing Keys And Values" Help topic in Registry Editor (Regedit.exe) or view the "Add and Delete Information in the Registry" and "Edit Registry Data" Help topics in Regedt32.exe.Note We recommend backing up the registry before you edit it.
To disable the file: protocol handler, follow these steps:
- Close all instances of Internet Explorer
- Click Start, click Run, type "regedt32 " (without the quotation marks), and then click OK
- In Registry Editor, locate the following registry key:HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
- Add or edit the DWORD value NoFileUrl
- Set the value to 1
Impact of Workaround: URLs utilizing the file: handler will not function.
Block TCP ports 139 and 445 at the firewall:
Although WebDAV uses TCP port 80 for outbound communication, TCP ports 139 and 445 can be used outbound to attempt to connect to a malicious service and try to exploit this vulnerability. Blocking them at the firewall can help prevent systems that are behind that firewall from attempts to exploit this vulnerability. We recommend that you block all unsolicited inbound communication from the Internet to help prevent attacks that may use other ports. For more information about ports, visit the following Web site.
FAQ for Folder GUID Code Execution Vulnerability - CVE-2006-3281:
What is the scope of the vulnerability?
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could remotely take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.
If a user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
What causes the vulnerability?
Improper handling by Windows Explorer of Drag and Drop events. User interaction is required to exploit this vulnerability
What might an attacker use the vulnerability to do?
An attacker who could successfully convince a user to visit attacker's web site and save a specially crafted file to the affected system could take complete control of the users system.
What systems are primarily at risk from the vulnerability?
Workstations and terminal servers are primarily at risk. Servers could be at more risk if users who do not have sufficient administrative permissions are given the ability to log on to servers and to run programs. However, best practices strongly discourage allowing this.
What does the update do?
The update removes the vulnerability by preventing specially crafted files and directories from invoking arbitrary code without specific user interaction.
When this security bulletin was issued, had this vulnerability been publicly disclosed?
Yes. This vulnerability has been publicly disclosed. It has been assigned Common Vulnerability and Exposure number CVE-2006-3281. It also has been named Microsoft Internet Explorer Information Disclosure and HTA File Execution Vulnerability by the larger security community.
When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had seen examples of proof of concept code published publicly but had not received any information to indicate that this vulnerability had been publicly used to attack customers when this security bulletin was originally issued.
How does this vulnerability relate to the vulnerability that is corrected by MS06-015?
Both vulnerabilities were in Windows Explorer. However, this update addresses a new vulnerability that was not addressed as part of MS06-015. MS06-015 helps protect against the vulnerability that is discussed in that bulletin, but does not address this new vulnerability. This update does not replace MS06-015
Security Update Information
Affected Software:
For information about the specific security update for your affected software, click the appropriate link:
Windows Server 2003 (all versions)
Prerequisites This security update requires Windows Server 2003 or Windows Server 2003 Service Pack 1.
Inclusion in Future Service Packs: The update for this issue will be included in future Service Pack or Update Rollup.
Installation Information
This security update supports the following setup switches.
Note The security updates for Microsoft Windows Server 2003 and Microsoft Windows Server 2003 Service Pack 1 also apply to Microsoft Windows Server 2003 R2.
Inclusion in Future Service Packs: The update for this issue will be included in future Service Pack or Update Rollup.
Installation Information
This security update supports the following setup switches
Switch | Description |
---|---|
/help | Displays the command-line options |
Setup Modes | |
/passive | Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds. |
/quiet | Quiet mode. This is the same as unattended mode, but no status or error messages are displayed. |
Restart Options | |
/norestart | Does not restart when installation has completed |
/forcerestart | Restarts the computer after installation and force other applications to close at shutdown without saving open files first. |
/warnrestart[:x] | Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch. |
/promptrestart | Display a dialog box prompting the local user to allow a restart |
Special Options | |
/overwriteoem | Overwrites OEM files without prompting |
/nobackup | Does not back up files needed for uninstall |
/forceappsclose | Forces other programs to close when the computer shuts down |
/log: path | Allows the redirection of installation log files |
/integrate:path | Integrates the update into the Windows source files. These files are located at the path that is specified in the switch. |
/extract[:path] | Extracts files without starting the Setup program |
/ER | Enables extended error reporting |
/verbose | Enables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly. |
Note You can combine these switches into one command. For backward compatibility, the security update also supports many of the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841. For more information about the Update.exe installer, visit the Microsoft TechNet Web site.
Deployment Information
To install the security update without any user intervention, use the following command at a command prompt for Windows Server 2003:
Windowsserver2003-kb921398-x86-enu /quiet
Note Use of the /quiet switch will suppress all messages. This includes suppressing failure messages. Administrators should use one of the supported methods to verify the installation was successful when they use the /quiet switch. Administrators should also review the KB921398.log file for any failure messages when they use this switch.
To install the security update without forcing the system to restart, use the following command at a command prompt for Windows Server 2003:
Windowsserver2003-kb921398-x86-enu /norestart
For information about how to deploy this security update by using Software Update Services, visit the Software Update Services Web site. For more information about how to deploy this security update using Windows Server Update Services, visit the Windows Server Update Services Web site. This security update will also be available through the Microsoft Update Web site.
Restart Requirement
You must restart your system after you apply this security update.
This security update does not support HotPatching. For more information about HotPatching and how to deploy this security update as a HotPatch see Microsoft Knowledge Base Article 897341.
Note Not all security updates support HotPatching, and some security updates that support HotPatching might require that you restart the server after you install the security update. HotPatching is only supported if the files being replaced by the security update are General Distribution Release (GDR) files. HotPatching is not supported if you have previously installed a hotfix to update one of the files included in the security update. For more information about this behavior, see Microsoft Knowledge Base Article 897341 and Microsoft Knowledge Base Article 824994.
Removal Information
To remove this update, use the Add or Remove Programs tool in Control Panel.
System administrators can also use the Spuninst.exe utility to remove this security update. The Spuninst.exe utility is located in the %Windir%\$NTUninstallKB921398$\Spuninst folder.
Switch | Description |
---|---|
/help | Displays the command-line options |
Setup Modes | |
/passive | Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds. |
/quiet | Quiet mode. This is the same as unattended mode, but no status or error messages are displayed. |
Restart Options | |
/norestart | Does not restart when installation has completed |
/forcerestart | Restarts the computer after installation and force other applications to close at shutdown without saving open files first. |
/warnrestart[:x] | Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch. |
/promptrestart | Display a dialog box prompting the local user to allow a restart |
Special Options | |
/forceappsclose | Forces other programs to close when the computer shuts down |
/log:path | Allows the redirection of installation log files |
File Information
The English version of this security update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.
Windows Server 2003, Web Edition; Windows Server 2003, Standard Edition; Windows Server 2003, Datacenter Edition; Windows Server 2003, Enterprise Edition; Windows Small Business Server 2003; Windows Server 2003, Web Edition with SP1; Windows Server 2003, Standard Edition with SP1; Windows Server 2003, Enterprise Edition with SP1; Windows Server 2003, Datacenter Edition with SP1; Windows Server 2003 R2, Web Edition; Windows Server 2003 R2, Standard Edition; Windows Server 2003 R2, Datacenter Edition; Windows Server 2003 R2, Enterprise Edition; Windows Small Business Server 2003 R2:
File Name | Version | Date | Time | Size | CPU | Folder |
---|---|---|---|---|---|---|
Shell32.dll | 6.0.3790.559 | 13-Jul-2006 | 12:42 | 8,173,056 | RTMGDR | |
Shell32.dll | 6.0.3790.559 | 13-Jul-2006 | 12:59 | 8,174,080 | x86 | RTMQFE |
Shell32.dll | 6.0.3790.2746 | 13-Jul-2006 | 12:55 | 8,382,976 | x86 | SP1GDR |
Shell32.dll | 6.0.3790.2746 | 13-Jul-2006 | 13:06 | 8,384,512 | x86 | SP1QFE |
W03a2409.dll | 5.2.3790.2746 | 13-Jul-2006 | 09:48 | 26,624 | x86 | SP1QFE |
Windows Server, 2003 Enterprise Edition for Itanium-based Systems; Windows Server 2003, Datacenter Edition for Itanium-based Systems; Windows Server 2003, Enterprise Edition with SP1 for Itanium-based Systems; and Windows Server 2003, Datacenter Edition with SP1 for Itanium-based Systems:
File Name | Version | Date | Time | Size | CPU | Folder |
---|---|---|---|---|---|---|
Shell32.dll | 6.0.3790.559 | 13-Jul-2006 | 13:54 | 12,969,984 | IA-64 | RTMGDR |
Wshell32.dll | 6.0.3790.559 | 13-Jul-2006 | 13:54 | 8,173,056 | RTMGDR\WOW | |
Shell32.dll | 6.0.3790.559 | 13-Jul-2006 | 13:55 | 12,973,056 | IA-64 | RTMQFE |
Wshell32.dll | 6.0.3790.559 | 13-Jul-2006 | 13:55 | 8,174,080 | x86 | RTMQFE\WOW |
Shell32.dll | 6.0.3790.2746 | 13-Jul-2006 | 14:08 | 13,254,656 | IA-64 | SP1GDR |
Wshell32.dll | 6.0.3790.2746 | 13-Jul-2006 | 14:08 | 8,382,976 | x86 | SP1GDR\WOW |
Shell32.dll | 6.0.3790.2746 | 13-Jul-2006 | 13:55 | 13,258,240 | IA-64 | SP1QFE |
W03a2409.dll | 5.2.3790.2746 | 13-Jul-2006 | 13:55 | 25,600 | IA-64 | SP1QFE |
Wshell32.dll | 6.0.3790.2746 | 13-Jul-2006 | 13:55 | 8,384,512 | x86 | SP1QFE\WOW |
Ww03a2409.dll | 5.2.3790.2746 | 13-Jul-2006 | 13:55 | 26,624 | x86 | SP1QFE\WOW |
Windows Server 2003, Standard x64 Edition; Windows Server 2003, Enterprise x64 Edition; and Windows Server 2003, Datacenter x64 Edition; Windows Server 2003 R2, Standard x64 Edition; Windows Server 2003 R2, Enterprise x64 Edition; and Windows Server 2003 R2, Datacenter x64 Edition:
File Name | Version | Date | Time | Size | CPU | Folder |
---|---|---|---|---|---|---|
Shell32.dll | 6.0.3790.2746 | 13-Jul-2006 | 14:07 | 10,499,584 | x64 | SP1GDR |
Wshell32.dll | 6.0.3790.2746 | 13-Jul-2006 | 14:07 | 8,382,976 | x86 | SP1GDR\WOW |
Shell32.dll | 6.0.3790.2746 | 13-Jul-2006 | 13:55 | 10,502,144 | x64 | SP1QFE |
W03a2409.dll | 5.2.3790.2746 | 13-Jul-2006 | 13:55 | 27,136 | x64 | SP1QFE |
Wshell32.dll | 6.0.3790.2746 | 13-Jul-2006 | 13:55 | 8,384,512 | x86 | SP1QFE\WOW |
Ww03a2409.dll | 5.2.3790.2746 | 13-Jul-2006 | 13:55 | 26,624 | x86 | SP1QFE\WOW |
Notes When you install these security updates, the installer checks to see if one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix. If you have previously installed a hotfix to update one of these files, the installer copies the RTMQFE, SP1QFE, or SP2QFE files to your system. Otherwise, the installer copies the RTMGDR, SP1GDR, or SP2GDR files to your system. Security updates may not contain all variations of these files. For more information about this behavior, see Microsoft Knowledge Base Article 824994.
For more information about this behavior, see Microsoft Knowledge Base Article 824994.
For more information about the Update.exe installer, visit the Microsoft TechNet Web site.
For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.
Verifying that the Update Has Been Applied
Microsoft Baseline Security Analyzer
To verify that a security update has been applied to an affected system, you can use the Microsoft Baseline Security Analyzer (MBSA) tool. MBSA allows administrators to scan local and remote systems for missing security updates and for common security misconfigurations. For more information about MBSA, visit the Microsoft Baseline Security Analyzer Web site.File Version Verification
Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.- Click Start, and then click Search.
- In the Search Results pane, click All files and folders under Search Companion.
- In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
- In the list of files, right-click a file name from the appropriate file information table, and then click Properties. Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
- On the Version tab, determine the version of the file that is installed on your computer by comparing it to the version that is documented in the appropriate file information table. Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
Registry Key Verification
You may also be able to verify the files that this security update has installed by reviewing the following registry key.Windows Server 2003, Web Edition; Windows Server 2003, Standard Edition; Windows Server 2003, Datacenter Edition; Windows Server 2003, Enterprise Edition; Windows Small Business Server 2003; Windows Server 2003, Web Edition with SP1; Windows Server 2003, Standard Edition with SP1; Windows Server 2003, Enterprise Edition with SP1; Windows Server 2003, Datacenter Edition with SP1; Windows Server 2003 R2, Web Edition; Windows Server 2003 R2, Standard Edition; Windows Server 2003 R2, Datacenter Edition; Windows Server 2003 R2, Enterprise Edition; Windows Small Business Server 2003 R2; Windows Server 2003, Enterprise Edition for Itanium-based Systems; Windows Server 2003, Datacenter Edition for Itanium-based Systems; Windows Server 2003, Enterprise Edition with SP1 for Itanium-based Systems; Windows Server 2003, Datacenter Edition with SP1 for Itanium-based Systems; Windows Server 2003, Standard x64 Edition; Windows Server 2003, Enterprise x64 Edition; and Windows Server 2003, Datacenter x64 Edition; Windows Server 2003 R2, Standard x64 Edition; Windows Server 2003 R2, Enterprise x64 Edition; and Windows Server 2003 R2, Datacenter x64 Edition:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows Server 2003\SP2\KB921398\Filelist
Note This registry key may not contain a complete list of installed files. Also, this registry key may not be created correctly if an administrator or an OEM integrates or slipstreams the 921398 security update into the Windows installation source files.
Windows XP (all versions)
Prerequisites This security update requires Microsoft Windows XP Service Pack 1 or a later version. For more information, see Microsoft Knowledge Base Article 322389.
Inclusion in Future Service Packs: The update for this issue will be included in a future Service Pack or Update Rollup.
Installation Information
This security update supports the following setup switches.
Switch | Description |
---|---|
/help | Displays the command-line options |
Setup Modes | |
/passive | Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds. |
/quiet | Quiet mode. This is the same as unattended mode, but no status or error messages are displayed. |
Restart Options | |
/norestart | Does not restart when installation has completed |
/forcerestart | Restarts the computer after installation and force other applications to close at shutdown without saving open files first. |
/warnrestart[:x] | Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch. |
/promptrestart | Display a dialog box prompting the local user to allow a restart |
Special Options | |
/overwriteoem | Overwrites OEM files without prompting |
/nobackup | Does not back up files needed for uninstall |
/forceappsclose | Forces other programs to close when the computer shuts down |
/log:path | Allows the redirection of installation log files |
/integrate:path | Integrates the update into the Windows source files. These files are located at the path that is specified in the switch. |
/extract[:path] | Extracts files without starting the Setup program |
/ER | Enables extended error reporting |
/verbose | Enables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly. |
Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841. For more information about the Update.exe installer, visit the Microsoft TechNet Web site.
Deployment Information
To install the security update without any user intervention, use the following command at a command prompt for Microsoft Windows XP:
Windowsxp-kb921398-x86-enu /quiet
Note Use of the /quiet switch will suppress all messages. This includes suppressing failure messages. Administrators should use one of the supported methods to verify the installation was successful when they use the /quiet switch. Administrators should also review the KB921398.log file for any failure messages when they use this switch.
To install the security update without forcing the system to restart, use the following command at a command prompt for Windows XP:
Windowsxp-kb921398-x86-enu /norestart
For information about how to deploy this security update by using Software Update Services, visit the Software Update Services Web site. For more information about how to deploy this security update using Windows Server Update Services, visit the Windows Server Update Services Web site. This security update will also be available through the Microsoft Update Web site.
Restart Requirement
You must restart your system after you apply this security update.
Removal Information
To remove this security update, use the Add or Remove Programs tool in Control Panel.
System administrators can also use the Spuninst.exe utility to remove this security update. The Spuninst.exe utility is located in the %Windir%\$NTUninstallKB921398$\Spuninst folder.
Switch | Description |
---|---|
/help | Displays the command-line options |
Setup Modes | |
/passive | Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds. |
/quiet | Quiet mode. This is the same as unattended mode, but no status or error messages are displayed. |
Restart Options | |
/norestart | Does not restart when installation has completed |
/forcerestart | Restarts the computer after installation and force other applications to close at shutdown without saving open files first. |
/warnrestart[:x] | Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch. |
/promptrestart | Display a dialog box prompting the local user to allow a restart |
Special Options | |
/forceappsclose | Forces other programs to close when the computer shuts down |
/log:path | Allows the redirection of installation log files |
File Information
The English version of this security update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.
Windows XP Home Edition Service Pack 1, Windows XP Professional Service Pack 1, Windows XP Tablet PC Edition, Windows XP Media Center Edition, Windows XP Home Edition Service Pack 2, Windows XP Professional Service Pack 2, Windows XP Tablet PC Edition 2005, and Windows XP Media Center Edition 2005:
File Name | Version | Date | Time | Size | CPU | Folder |
---|---|---|---|---|---|---|
Fldrclnr.dll | 6.0.2800.1579 | 20-Aug-2004 | 22:01 | 82,432 | x86 | SP1QFE |
Shell32.dll | 6.0.2800.1873 | 13-Jul-2006 | 13:46 | 8,353,280 | x86 | SP1QFE |
Sxs.dll | 5.1.2600.1579 | 20-Aug-2004 | 22:01 | 700,928 | x86 | SP1QFE |
Comctl32.dll | 6.0.2800.1873 | 13-Jul-2006 | 13:46 | 925,184 | x86 | SP1QFE\ASMS\60\MSFT\WINDOWS\COMMON\CONTROLS |
Controls.man | 13-Jul-2006 | 14:02 | 1,812 | SP1QFE\ASMS\60\MSFT\WINDOWS\COMMON\CONTROLS | ||
Comctl.man | 13-Jul-2006 | 14:02 | 621 | SP1QFE\ASMS\60\POLICY\60\COMCTL | ||
Shell32.dll | 6.0.2900.2951 | 13-Jul-2006 | 13:33 | 8,453,632 | x86 | SP2GDR |
Shell32.dll | 6.0.2900.2951 | 13-Jul-2006 | 14:03 | 8,457,728 | x86 | SP2QFE |
Xpsp3res.dll | 5.1.2600.2951 | 13-Jul-2006 | 11:22 | 150,016 | x86 | SP2QFE |
Windows XP Professional x64:
File Name | Version | Date | Time | Size | CPU | Folder |
---|---|---|---|---|---|---|
Shell32.dll | 6.0.3790.2746 | 13-Jul-2006 | 14:07 | 10,499,584 | x64 | SP1GDR |
Wshell32.dll | 6.0.3790.2746 | 13-Jul-2006 | 14:07 | 8,382,976 | x86 | SP1GDR\WOW |
Shell32.dll | 6.0.3790.2746 | 13-Jul-2006 | 13:55 | 10,502,144 | x64 | SP1QFE |
W03a2409.dll | 5.2.3790.2746 | 13-Jul-2006 | 13:55 | 27,136 | x64 | SP1QFE |
Wshell32.dll | 6.0.3790.2746 | 13-Jul-2006 | 13:55 | 8,384,512 | x86 | SP1QFE\WOW |
Ww03a2409.dll | 5.2.3790.2746 | 13-Jul-2006 | 13:55 | 26,624 | x86 | SP1QFE\WOW |
Notes When you install these security updates, the installer checks to see if one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix. If you have previously installed a hotfix to update one of these files, the installer copies the RTMQFE, SP1QFE, or SP2QFE files to your system. Otherwise, the installer copies the RTMGDR, SP1GDR, or SP2GDR files to your system. Security updates may not contain all variations of these files. For more information about this behavior, see Microsoft Knowledge Base Article 824994.
For more information about the Update.exe installer, visit the Microsoft TechNet Web site.
For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.
Verifying that the Update Has Been Applied
Microsoft Baseline Security Analyzer
To verify that a security update has been applied to an affected system, you can use the Microsoft Baseline Security Analyzer (MBSA) tool. MBSA allows administrators to scan local and remote systems for missing security updates and for common security misconfigurations. For more information about MBSA, visit the Microsoft Baseline Security Analyzer Web site.File Version Verification
Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.- Click Start, and then click Search.
- In the Search Results pane, click All files and folders under Search Companion.
- In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
- In the list of files, right-click a file name from the appropriate file information table, and then click Properties. Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
- On the Version tab, determine the version of the file that is installed on your computer by comparing it to the version that is documented in the appropriate file information table. Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
Registry Key Verification
You may also be able to verify the files that this security update has installed by reviewing the following registry keys.For Windows XP Home Edition Service Pack 1, Windows XP Professional Service Pack 1, Windows XP Tablet PC Edition, Windows XP Media Center Edition, Windows XP Home Edition Service Pack 2, Windows XP Professional Service Pack 2, Windows XP Tablet PC Edition 2005, and Windows XP Media Center Edition 2005:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows XP\SP3\KB921398\Filelist
For Windows XP Professional x64 Edition:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows XP Version 2003\SP2\KB921398\Filelist
Note These registry keys may not contain a complete list of installed files. Also, these registry keys may not be created correctly if an administrator or an OEM integrates or slipstreams the 921398 security update into the Windows installation source files.
Windows 2000 (all versions)
Prerequisites For Windows 2000, this security update requires Service Pack 4 (SP4). For Small Business Server 2000, this security update requires Small Business Server 2000 Service Pack 1a (SP1a) or Small Business Server 2000 running with Windows 2000 Server Service Pack 4 (SP4).
The software that is listed has been tested to determine whether the versions are affected. Other versions either no longer include security update support or may not be affected. To determine the support life cycle for your product and version, visit the Microsoft Support Lifecycle Web site.
For more information about how to obtain the latest service pack, see Microsoft Knowledge Base Article 260910.
Inclusion in Future Service Packs: The update for this issue may be included in a future Update Rollup.
Installation Information
This security update supports the following setup switches.
Switch | Description |
---|---|
/help | Displays the command-line options |
Setup Modes | |
/passive | Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds. |
/quiet | Quiet mode. This is the same as unattended mode, but no status or error messages are displayed. |
Restart Options | |
/norestart | Does not restart when installation has completed |
/forcerestart | Restarts the computer after installation and force other applications to close at shutdown without saving open files first. |
/warnrestart[:x] | Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch. |
/promptrestart | Display a dialog box prompting the local user to allow a restart |
Special Options | |
/overwriteoem | Overwrites OEM files without prompting |
/nobackup | Does not back up files needed for uninstall |
/forceappsclose | Forces other programs to close when the computer shuts down |
/log:path | Allows the redirection of installation log files |
/integrate:path | Integrates the update into the Windows source files. These files are located at the path that is specified in the switch. |
/extract[:path] | Extracts files without starting the Setup program |
/ER | Enables extended error reporting |
/verbose | Enables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly. |
Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841. For more information about the Update.exe installer, visit the Microsoft TechNet Web site. For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.
Deployment Information
To install the security update without any user intervention, use the following command at a command prompt for Windows 2000 Service Pack 4:
Windows2000-kb921398-x86-enu /quiet
Note Use of the /quiet switch will suppress all messages. This includes suppressing failure messages. Administrators should use one of the supported methods to verify the installation was successful when they use the /quiet switch. Administrators should also review the KB921398.log file for any failure messages when they use this switch.
To install the security update without forcing the system to restart, use the following command at a command prompt for Windows 2000 Service Pack 4:
Windows2000-kb921398-x86-enu /norestart
For more information about how to deploy this security update with Software Update Services, visit the Software Update Services Web site. For more information about how to deploy this security update using Windows Server Update Services, visit the Windows Server Update Services Web site. This security update will also be available through the Microsoft Update Web site.
Restart Requirement
You must restart your system after you apply this security update.
Removal Information
To remove this security update, use the Add or Remove Programs tool in Control Panel.
System administrators can also use the Spuninst.exe utility to remove this security update. The Spuninst.exe utility is located in the %Windir%\$NTUninstallKB921398$\Spuninst folder.
Switch | Description |
---|---|
/help | Displays the command-line options |
Setup Modes | |
/passive | Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds. |
/quiet | Quiet mode. This is the same as unattended mode, but no status or error messages are displayed. |
Restart Options | |
/norestart | Does not restart when installation has completed |
/forcerestart | Restarts the computer after installation and force other applications to close at shutdown without saving open files first. |
/warnrestart[:x] | Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch. |
/promptrestart | Display a dialog box prompting the local user to allow a restart |
Special Options | |
/forceappsclose | Forces other programs to close when the computer shuts down |
/log:path | Allows the redirection of installation log files |
File Information
The English version of this security update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.
Windows 2000 Service Pack 4 and Small Business Server 2000:
File Name | Version | Date | Time | Size | CPU |
---|---|---|---|---|---|
Shell32.dll | 5.0.3900.7105 | 13-Jul-2006 | 19:39 | 2,362,640 | x86 |
Verifying that the Update Has Been Applied
Microsoft Baseline Security Analyzer
To verify that a security update has been applied to an affected system, you can use the Microsoft Baseline Security Analyzer (MBSA) tool. MBSA allows administrators to scan local and remote systems for missing security updates and for common security misconfigurations. For more information about MBSA, visit the Microsoft Baseline Security Analyzer Web site.File Version Verification
Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.- Click Start, and then click Search.
- In the Search Results pane, click All files and folders under Search Companion.
- In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
- In the list of files, right-click a file name from the appropriate file information table, and then click Properties. Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
- On the Version tab, determine the version of the file that is installed on your computer by comparing it to the version that is documented in the appropriate file information table. Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.
Registry Key Verification
You may also be able to verify the files that this security update has installed by reviewing the following registry key:HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows 2000\SP5\KB921398\Filelist
Note This registry key may not contain a complete list of installed files. Also, this registry key may not be created correctly when an administrator or an OEM integrates or slipstreams the 921398 security update into the Windows installation source files.
Other Information
Obtaining Other Security Updates:
Updates for other security issues are available at the following locations:
- Security updates are available in the Microsoft Download Center. You can find them most easily by doing a keyword search for "security_patch."
- Updates for consumer platforms are available at the Microsoft Update Web site.
Support:
- Customers in the U.S. and Canada can receive technical support from Microsoft Product Support Services at 1-866-PCSAFETY. There is no charge for support calls that are associated with security updates.
- International customers can receive support from their local Microsoft subsidiaries. There is no charge for support that is associated with security updates. For more information about how to contact Microsoft for support issues, visit the International Support Web site.
Security Resources:
- The Microsoft TechNet Security Web site provides additional information about security in Microsoft products.
- Microsoft Software Update Services
- Microsoft Windows Server Update Services
- Microsoft Baseline Security Analyzer (MBSA)
- Windows Update
- Microsoft Update
- Windows Update Catalog: For more information about the Windows Update Catalog, see Microsoft Knowledge Base Article 323166.
- Office Update
Software Update Services:
By using Microsoft Software Update Services (SUS), administrators can quickly and reliably deploy the latest critical updates and security updates to Windows 2000 and Windows Server 2003-based servers, and to desktop systems that are running Windows 2000 Professional or Windows XP Professional.
For more information about how to deploy security updates by using Software Update Services, visit the Software Update Services Web site.
Windows Server Update Services:
By using Windows Server Update Services (WSUS), administrators can quickly and reliably deploy the latest critical updates and security updates for Windows 2000 operating systems and later, Office XP and later, Exchange Server 2003, and SQL Server 2000 onto Windows 2000 and later operating systems.
For more information about how to deploy security updates using Windows Server Update Services, visit the Windows Server Update Services Web site.
Systems Management Server:
Microsoft Systems Management Server (SMS) delivers a highly-configurable enterprise solution for managing updates. By using SMS, administrators can identify Windows-based systems that require security updates and can perform controlled deployment of these updates throughout the enterprise with minimal disruption to end users. For more information about how administrators can use SMS 2003 to deploy security updates, visit the SMS 2003 Security Patch Management Web site. SMS 2.0 users can also use Software Updates Service Feature Pack to help deploy security updates. For information about SMS, visit the SMS Web site.
Note SMS uses the Microsoft Baseline Security Analyzer, the Microsoft Office Detection Tool, and the Enterprise Update Scanning Tool to provide broad support for security bulletin update detection and deployment. Some software updates may not be detected by these tools. Administrators can use the inventory capabilities of the SMS in these cases to target updates to specific systems. For more information about this procedure, visit the following Web site. Some security updates require administrative rights following a restart of the system. Administrators can use the Elevated Rights Deployment Tool (available in the SMS 2003 Administration Feature Pack and in the SMS 2.0 Administration Feature Pack) to install these updates.
Disclaimer:
The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.
Revisions:
- V1.0 (August 8, 2006): Bulletin published
Built at 2014-04-18T13:49:36Z-07:00