Previous

Next

Exercise: Create and configure a virtual network gateway

Completed

Lab scenario

In this exercise you will configure a virtual network gateway to connect the Contoso Core Services VNet and Manufacturing VNet.

Architecture diagram

Objectives

• Task 1: Create CoreServicesVnet and ManufacturingVnet
  • Use a template to create the virtual networks. You can review the lab template.
  • Use Azure PowerShell to deploy the template.
• Task 2: Create CoreServicesTestVM
  • Use a template to create the virtual machines. You can review the lab template.
  • Use Azure PowerShell to deploy the template.
• Task 3: Create ManufacturingTestVM
  • Use a template to create the virtual machines. You can review the lab template.
  • Use Azure PowerShell to deploy the template.
• Task 4: Connect to the VMs using RDP
• Task 5: Test the connection between the VMs
• Task 6: Create CoreServicesVnet Gateway
• Task 7: Create ManufacturingVnet Gateway
• Task 8: Connect CoreServicesVnet to ManufacturingVnet
• Task 9: Connect ManufacturingVnet to CoreServicesVnet
• Task 10: Verify that the connections connect
• Task 11: Test the connection between the VMs

Note

Click on the thumbnail image to start the lab simulation. When you're done, be sure to return to this page so you can continue learning.

Note

You may find slight differences between the interactive simulation and the hosted lab, but the core concepts and ideas being demonstrated are the same.

Continue