EVT_ACX_CIRCUIT_PREPARE_HARDWARE callback function (acxcircuit.h)

The EVT_ACX_CIRCUIT_PREPARE_HARDWARE callback is used by the driver to add functionality when an ACXCIRCUIT is in the prepare hardware phase.

Syntax

EVT_ACX_CIRCUIT_PREPARE_HARDWARE EvtAcxCircuitPrepareHardware;

NTSTATUS EvtAcxCircuitPrepareHardware(
  WDFDEVICE Device,
  ACXCIRCUIT Circuit,
  WDFCMRESLIST ResourcesRaw,
  WDFCMRESLIST ResourcesTranslated
)
{...}

Parameters

Device

A WDFDEVICE object (described in WDF - Summary of Framework Objects) associated with the specified ACXCIRCUIT.

Circuit

The ACXCIRCUIT object (described in Summary of ACX Objects) in the prepare hardware phase.

ResourcesRaw

A handle to a framework resource-list object that identifies the raw hardware resources that the Plug and Play manager has assigned to the device. For more information about raw resources, see Raw and Translated Resources.

ResourcesTranslated

A handle to a framework resource-list object that identifies the translated hardware resources that the Plug and Play manager has assigned to the device.

Return value

Returns STATUS_SUCCESS if the call was successful. Otherwise, it returns an appropriate error code. For more information, see Using NTSTATUS Values.

Remarks

To register an EvtAcxCircuitPrepareHardware callback function, a driver must call the AcxCircuitInitSetAcxCircuitPnpPowerCallbacks method.

If the driver has registered an EvtAcxCircuitPrepareHardware callback function for an ACXCIRCUIT, the ACX framework calls the function after WDF framework calls the driver's EvtDevicePrepareHardware callback function.

The EvtAcxCircuitPrepareHardware callback function accesses the device's raw and translated hardware resources by using the ResourcesRaw and ResourcesTranslated handles that it receives. The callback function can call WdfCmResourceListGetCount and WdfCmResourceListGetDescriptor to traverse the resource lists. This callback function cannot modify the resource lists.

For more information about resource lists and the order in which the resources appear, see Raw and Translated Resources.

Typically, your driver's EvtAcxCircuitPrepareHardware callback function does the following, if necessary:

• Maps physical memory addresses to virtual addresses of the ACXCIRCUIT so the driver can access memory that is assigned to the device.
• Optionally, your driver's EvtAcxCircuitPrepareHardware callback function might queue a work item to complete any other time-intensive configuration tasks. Using a work item for such operations can help ensure that your device's start up time does not increase the system boot time. For more information, see Using Framework Work Items.
• Typically, all other hardware initialization operations, including loading firmware, should take place each time that the device enters its working (D0) state and should therefore take place in the driver's EvtDeviceD0Entry callback function.

The ResourcesRaw and ResourcesTranslated handles that the EvtAcxCircuitPrepareHardware/EvtDevicePrepareHardware callback function receives remain valid until the driver's EvtDeviceReleaseHardware callback function returns.

If the driver fails the EvtAcxCircuitPrepareHardware callback, the ACXCIRCUIT object is placed in the delete-pending state and associated ACXSTREAMS are shutdown.

For more information about hardware resources, see Introduction to Hardware Resources.

For more information about when the ACX and WDF framework call these callback functions, see PnP and Power Management Scenarios.

For more information about drivers that provide this callback function, see Supporting PnP and Power Management in Function Driver.

Example

Example usage is shown below.

NTSTATUS
EvtCircuitPrepareHardware(
    _In_ WDFDEVICE      Device,
    _In_ ACXCIRCUIT     Circuit,
    _In_ WDFCMRESLIST   ResourcesRaw,
    _In_ WDFCMRESLIST   ResourcesTranslated
    )
{
    NTSTATUS            status      = STATUS_SUCCESS;
    PCIRCUIT_CONTEXT    circuitCtx  = GetCircuitContext(Circuit);
    CIpcEventReader *   eventReader = circuitCtx->EventReader;

    PASSIVE_CODE();

    UNREFERENCED_PARAMETER(Device);
    UNREFERENCED_PARAMETER(ResourcesRaw);
    UNREFERENCED_PARAMETER(ResourcesTranslated);

    //
    // Enable 'remote' circuit notifications.
    //
    ASSERT(eventReader);
    status = eventReader->EnableEvents();
    if (!NT_SUCCESS(status))
    {
        DrvLogError(g_RecorderLog, FLAG_INIT,
                    "ACXCIRCUIT %p, CIpcEventReader::EnableEvents failed, %!STATUS!",
                    Circuit, status);
        goto exit;
    }

    status = STATUS_SUCCESS;

exit:
    return status;
}

ACX requirements

Minimum ACX version: 1.0

For more information about ACX versions, see ACX version overview.

Requirements

Requirement	Value
Header	acxcircuit.h
IRQL	PASSIVE_LEVEL

See also

• acxcircuit.h header