Edit

WDI_BSS_SELECTION_FLAGS enumeration (dot11wificxtypes.h)

  • Article

Important

This topic is part of the WiFiCx driver model. WiFiCx is the Wi-Fi driver model released in Windows 11. We recommend that you use WiFiCx to take advantage of the latest features. The previous Wi-Fi driver model WDI is in maintenance mode and will only receive high priority fixes.

The WDI_BSS_SELECTION_FLAGS enumeration defines flags for BSS selection.

Syntax

typedef enum _WDI_BSS_SELECTION_FLAGS {
  WDI_BSS_SELECTION_HOST_PREFERRED = 0x00000001,
  WDI_BSS_SELECTION_RECENT_ASSOCIATION_ERROR = 0x00000002,
  WDI_BSS_SELECTION_FLAGS_AP_REQUESTED_TRANSITION = 0x00000004
} WDI_BSS_SELECTION_FLAGS;

Constants

 
WDI_BSS_SELECTION_HOST_PREFERRED
Value: 0x00000001
Set for BSS entries that the host prefers to connect to. Non-preferred BSS entries would also be provided to the port, but should only be used for connection if port performs its own BSS ranking.
WDI_BSS_SELECTION_RECENT_ASSOCIATION_ERROR
Value: 0x00000002
Set for BSS entries that had recent association failures or were recently disassociated from. This flag is already accounted for by the host when setting WDI_BSS_SELECTION_HOST_PREFERRED.
WDI_BSS_SELECTION_FLAGS_AP_REQUESTED_TRANSITION
Value: 0x00000004
Specifies whether this roam was requested by the AP or not (11v BSS Transition management request).

Remarks

The WDI_BSS_SELECTION_FLAGS enum is a value in the WDI_TLV_BSS_SELECTION_PARAMETERS TLV.

Requirements

Requirement Value
Minimum supported client Windows 11
Minimum supported server Windows Server 2022
Header dot11wificxtypes.h

See also

WDI_TLV_BSS_SELECTION_PARAMETERS