dot11wificxtypes.h header

This header is used by network. For more information, see:

dot11wificxtypes.h contains the following programming interfaces:

Structures

 
WDI_BAND_CHANNEL_MAPPING_ENTRY

Microsoft reserves the WDI_BAND_CHANNEL_MAPPING_ENTRY structure for internal use only. Don't use this structure in your code.
WDI_BYTE16

Microsoft reserves the WDI_BYTE16 structure for internal use only. Don't use this structure in your code.
WDI_BYTE4

Microsoft reserves the WDI_BYTE4 structure for internal use only. Don't use this structure in your code.
WDI_CHANNEL_MAPPING_ENTRY

The WDI_CHANNEL_MAPPING_ENTRY struct defines a channel mapping entry.
WDI_DATA_RATE_ENTRY

The WDI_DATA_RATE_ENTRY struct defines a data rate entry.
WDI_ETHERTYPE_ENCAPSULATION_ENTRY

The WDI_ETHERTYPE_ENCAPSULATION_ENTRY struct defines an EtherType encapsulation entry.
WDI_TYPE_MIC

The WDI_TYPE_MIC struct defines the MIC (802.11r).
WDI_TYPE_NONCE

The WDI_TYPE_NONCE struct defines the SNonce or ANonce (802.11r).
WDI_TYPE_PMK_NAME

The WDI_TYPE_PMK_NAME struct defines the PMKR0Name or PMKR1Name (802.11r).

Enumerations

 
WDI_ACTION_FRAME_CATEGORY

The WDI_ACTION_FRAME_CATEGORY enumeration defines action frame categories.
WDI_ANQP_QUERY_STATUS

Microsoft reserves the WDI_ANQP_QUERY_STATUS enumeration for internal use only. Don't use this enumeration in your code.
WDI_ASSOC_STATUS

The WDI_ASSOC_STATUS enum defines association status values.
WDI_AUTH_ALGORITHM

The WDI_AUTH_ALGORITHM enumeration defines authentication algorithm values.
WDI_BAND_ID

The WDI_BAND_ID enumeration is a UINT32 value that defines a band ID.
WDI_BLUETOOTH_COEXISTENCE_SUPPORT

The WDI_BLUETOOTH_COEXISTENCE_SUPPORT enum defines Bluetooth coexistence support values.
WDI_BSS_SELECTION_FLAGS

The WDI_BSS_SELECTION_FLAGS enum defines flags for BSS selection.
WDI_BSS_TRANSITION_RESPONSE_RESULT

Microsoft reserves the WDI_BSS_TRANSITION_RESPONSE_RESULT enumeration for internal use only. Don't use this enumeration in your code.
WDI_CAN_SUSTAIN_AP_REASON

The WDI_CAN_SUSTAIN_AP_REASON enum defines the reasons the port is ready to receive a OID_WDI_TASK_START_AP request.
WDI_CIPHER_ALGORITHM

The WDI_CIPHER_ALGORITHM enum defines the cipher algorithm values.
WDI_CIPHER_KEY_DIRECTION

The WDI_CIPHER_KEY_DIRECTION enum defines the traffic directions decrypted by a cipher key.
WDI_CIPHER_KEY_TYPE

The WDI_CIPHER_KEY_TYPE enum defines the cipher key types.
WDI_CONNECTION_QUALITY_HINT

The WDI_CONNECTION_QUALITY_HINT enum defines the Wi-Fi connection quality hints.
WDI_DATA_RATE_FLAGS

The WDI_DATA_RATE_FLAGS enum defines the data rate flags.
WDI_DISABLE_DATA_PATH_OFFLOADS_SCENARIO

The WDI_DISABLE_DATA_PATH_OFFLOADS_SCENARIO enumeration is used to instruct the OS to disable datapath offloads for this connection only.
WDI_DS_INFO

The WDI_DS_INFO enum defines values that specify whether the port is connected to the same DS that it was previously associated to.
WDI_ENCAPSULATION_TYPE

Microsoft reserves the WDI_ENCAPSULATION_TYPE enumeration for internal use only. Don't use this enumeration in your code.
WDI_EXEMPTION_PACKET_TYPE

The WDI_EXEMPTION_PACKET_TYPE enum defines the types of packet exemptions.
WDI_FIPS_MODE

Microsoft reserves the WDI_FIPS_MODE enumeration for internal use only. Don't use this enumeration in your code.
WDI_FTM_BANDWIDTH

The WDI_FTM_BANDWIDTH enum defines the negotiated bandwidth between two STAs to exercise the FTM.
WDI_FTM_PROPAGATION

The WDI_FTM_PROPAGATION enum defines the propagation properties of a signal tat are estimated by the LE's logic.
WDI_FTM_RESPONSE_STATUS

The WDI_FTM_RESPONSE_STATUS enum defines the response status for a Fine Timing Measurement (FTM) request.
WDI_IHV_TASK_PRIORITY

The WDI_IHV_TASK_PRIORITY enum defines IHV task priorities.
WDI_LCI_REPORT_STATUS

The WDI_LCI_REPORT_STATUS enum defines the response status for an LCI report, if the report were requested in a Fine Timing Measurement (FTM) request.
WDI_OS_POWER_MANAGEMENT_FLAGS

Microsoft reserves the WDI_OS_POWER_MANAGEMENT_FLAGS enumeration for internal use only. Don't use this enumeration in your code.
WDI_P2P_ACTION_FRAME_TYPE

The WDI_P2P_ACTION_FRAME_TYPE enum defines the Wi-Fi Direct action frame types.
WDI_P2P_CHANNEL_INDICATE_REASON

The WDI_P2P_CHANNEL_INDICATE_REASON enum defines Wi-Fi Direct channel indication reason values.
WDI_P2P_DISCOVER_TYPE

The WDI_P2P_DISCOVER_TYPE enum defines the Wi-Fi Direct discovery types.
WDI_P2P_GO_INTERNAL_RESET_POLICY

The WDI_P2P_GO_INTERNAL_RESET_POLICY enum defines the Wi-Fi Direct Group Owner internal reset policies.
WDI_P2P_LISTEN_STATE

The WDI_P2P_LISTEN_STATE enum defines the Wi-Fi Direct listen states.
WDI_P2P_SCAN_TYPE

The WDI_P2P_SCAN_TYPE enum defines the Wi-Fi Direct scan types.
WDI_P2P_SERVICE_DISCOVERY_TYPE

The WDI_P2P_SERVICE_DISCOVERY_TYPE enum defines the types of service discovery.
WDI_PACKET_FILTER_TYPE

Microsoft reserves the WDI_PACKET_FILTER_TYPE enumeration for internal use only. Don't use this enumeration in your code.
WDI_PHY_TYPE

The WDI_PHY_TYPE enumeration defines PHY types.
WDI_POWER_MODE_REASON_CODE

The WDI_POWER_MODE_REASON_CODE enum defines the reasons for entering the Power Save state.
WDI_POWER_SAVE_LEVEL

The WDI_POWER_SAVE_LEVEL enum defines the power save levels.
WDI_QOS_ACTION

The WDI_QOS_ACTION enumeration defines the QOS actions.
WDI_QOS_PROTOCOL

Microsoft reserves the WDI_QOS_PROTOCOL enumeration for internal use only. Don't use this enumeration in your code.
WDI_RADIO_MEASUREMENT_ACTION

The WDI_RADIO_MEASUREMENT_ACTION enumeration defines the radio measurement actions.
WDI_ROAM_TRIGGER

The WDI_ROAM_TRIGGER enum defines roam triggers.
WDI_ROBUST_AV_STREAMING_ACTION

The WDI_ROBUST_AV_STREAMING_ACTION enumeration defines the robust AV streaming actions.
WDI_SAE_INDICATION_TYPE

The WDI_SAE_INDICATION_TYPE enum defines the type of information needed to continue SAE authentication with the BSSID, or notification that authentication cannot continue.
WDI_SAE_REQUEST_TYPE

The WDI_SAE_REQUEST_TYPE enum defines the type of SAE request frame to send to the BSSID.
WDI_SAE_STATUS

The WDI_SAE_STATUS enum defines SAE authentication failure error status codes.
WDI_SCAN_TRIGGER

The WDI_SCAN_TRIGGER enum defines scan trigger values.
WDI_SCAN_TYPE

The WDI_SCAN_TYPE enum defines scan types.
WDI_STOP_AP_REASON

The WDI_STOP_AP_REASON enum defines the reasons an adapter cannot sustain 802.11 Access Point (AP) functionality on any of the PHYs.
WDI_WNM_ACTION

Microsoft reserves the WDI_WNM_ACTION enumeration for internal use only. Don't use this enumeration in your code.
WDI_WPS_CONFIGURATION_METHOD

The WDI_WPS_CONFIGURATION_METHOD enum defines WPS configuration methods.