parallel.h header
This header is used by parports. For more information, see:
parallel.h contains the following programming interfaces:
IOCTLs
| IOCTL_INTERNAL_DESELECT_DEVICE The IOCTL_INTERNAL_DESELECT_DEVICE request deselects an IEEE 1284.3 daisy-chain device or an IEEE 1284 end-of-chain device attached to a parallel port. |
| IOCTL_INTERNAL_DISCONNECT_IDLE The IOCTL_INTERNAL_DISCONNECT_IDLE request disconnects the IEEE 1284 operating modes that are set for a parallel device. |
| IOCTL_INTERNAL_GET_MORE_PARALLEL_PORT_INFO The IOCTL_INTERNAL_GET_MORE_PARALLEL_PORT_INFO request returns information about a parallel port. |
| IOCTL_INTERNAL_GET_PARALLEL_PNP_INFO The IOCTL_INTERNAL_GET_PARALLEL_PNP_INFO request returns Plug and Play information about a parallel port. |
| IOCTL_INTERNAL_GET_PARALLEL_PORT_INFO The IOCTL_INTERNAL_GET_PARALLEL_PORT_INFO request returns information about a parallel port. |
| IOCTL_INTERNAL_INIT_1284_3_BUS The IOCTL_INTERNAL_INIT_1284_3_BUS request initializes and assigns an IEEE 1284.3 device ID to all the 1284.3 daisy chain devices that are attached to a parallel port. |
| IOCTL_INTERNAL_LOCK_PORT The IOCTL_INTERNAL_LOCK_PORT request allocates the parallel device's parent parallel port and selects the parallel device on the port. |
| IOCTL_INTERNAL_LOCK_PORT_NO_SELECT The IOCTL_INTERNAL_LOCK_PORT_NO_SELECT request allocates the parallel device's parent parallel port, but does not select the parallel device. |
| IOCTL_INTERNAL_PARALLEL_CLEAR_CHIP_MODE The IOCTL_INTERNAL_PARALLEL_CLEAR_CHIP_MODE request clears the operating mode of a parallel port. |
| IOCTL_INTERNAL_PARALLEL_CONNECT_INTERRUPT The IOCTL_INTERNAL_PARALLEL_CONNECT_INTERRUPT request connects an optional interrupt service routine and an optional deferred port check routine to a parallel port. |
| IOCTL_INTERNAL_PARALLEL_DISCONNECT_INTERRUPT The IOCTL_INTERNAL_PARALLEL_DISCONNECT_INTERRUPT request disconnects an interrupt service routine (and an optional deferred port check service routine) that was connected by using an IOCTL_INTERNAL_PARALLEL_CONNECT_INTERRUPT request. |
| IOCTL_INTERNAL_PARALLEL_PORT_ALLOCATE The IOCTL_INTERNAL_PARALLEL_PORT_ALLOCATE request allocates a parallel port for exclusive access by a client. |
| IOCTL_INTERNAL_PARALLEL_PORT_FREE The IOCTL_INTERNAL_PARALLEL_PORT_FREE request frees a parallel port. |
| IOCTL_INTERNAL_PARALLEL_SET_CHIP_MODE The IOCTL_INTERNAL_PARALLEL_SET_CHIP_MODE request sets the operating mode of a parallel port. |
| IOCTL_INTERNAL_PARCLASS_CONNECT The IOCTL_INTERNAL_PARCLASS_CONNECT request returns information about a parallel port and the callback routines that the system-supplied bus driver for parallel ports provides to operate the parallel port. |
| IOCTL_INTERNAL_PARCLASS_DISCONNECT The IOCTL_INTERNAL_PARCLASS_DISCONNECT request disconnects a client from a parallel device. |
| IOCTL_INTERNAL_RELEASE_PARALLEL_PORT_INFO The IOCTL_INTERNAL_RELEASE_PARALLEL_PORT_INFO request returns STATUS_SUCCESS. |
| IOCTL_INTERNAL_SELECT_DEVICE The IOCTL_INTERNAL_SELECT_DEVICE request:Allocates the parallel portThe system-supplied function driver for parallel ports allocates the parallel port if the client does not set the PAR_HAVE_PORT_KEEP_PORT flag in the CommandFlags member of the input PARALLEL_1284_COMMAND structure. Otherwise, the parallel port function driver does not allocate the parallel port.Selects an IEEE 1284.3 daisy chain parallel device or an end-of-chain device attached to the parallel portAlthough a client can select an end-of-chain device using a select device request, Microsoft recommends using an IOCTL_INTERNAL_PARALLEL_PORT_ALLOCATE request instead. The parallel port function driver selects the end-of-chain device before it allocates the parallel port to a client. |
| IOCTL_INTERNAL_UNLOCK_PORT The IOCTL_INTERNAL_UNLOCK_PORT request deselects a parallel device and frees the parallel device's parent parallel port. |
| IOCTL_INTERNAL_UNLOCK_PORT_NO_DESELECT The IOCTL_INTERNAL_UNLOCK_PORT_NO_DESELECT request frees a parallel device's parent parallel port. |
Callback functions
| PDETERMINE_IEEE_MODES The PDETERMINE_IEEE_MODES-typed callback routine determines which IEEE 1284 protocols a parallel device supports. The system-supplied bus driver for parallel ports supplies this routine. |
| PNEGOTIATE_IEEE_MODE The PNEGOTIATE_IEEE_MODE-typed callback routine selects the fastest forward and reverse protocols that the system-supplied bus driver for parallel ports supports from among those specified by the caller. |
| PPARALLEL_CLEAR_CHIP_MODE The PPARALLEL_CLEAR_CHIP_MODE-typed callback routine clears the operating mode of a parallel port by resetting the communication mode of the host chipset to IEEE 1284-compatibility mode. |
| PPARALLEL_DESELECT_ROUTINE The PPARALLEL_DESELECT_ROUTINE-typed callback routine deselects either an IEEE 1284.3 daisy chain device or an IEEE 1284 end-of-chain device that is attached to a parallel port. |
| PPARALLEL_FREE_ROUTINE The PPARALLEL_FREE_ROUTINE-typed callback routine frees a parallel port. The system-supplied function driver for parallel ports supplies this routine. |
| PPARALLEL_IEEE_FWD_TO_REV The PPARALLEL_IEEE_FWD_TO_REV-typed callback routine changes the transfer mode from forward to reverse. The system-supplied bus driver for parallel ports supplies this routine. |
| PPARALLEL_IEEE_REV_TO_FWD The PPARALLEL_IEEE_REV_TO_FWD-typed callback routine changes the transfer mode from reverse to forward. The system-supplied bus driver for parallel ports supplies this routine. |
| PPARALLEL_QUERY_WAITERS_ROUTINE The PPARALLEL_QUERY_WAITERS_ROUTINE-typed callback routine returns the number of IOCTL_INTERNAL_PARALLEL_PORT_ALLOCATE and IOCTL_INTERNAL_SELECT_DEVICE requests that are queued on the work queue of a parallel port. |
| PPARALLEL_READ The PPARALLEL_READ-typed callback routine reads data from a parallel device. The system-supplied bus driver for parallel ports supplies this routine. |
| PPARALLEL_SET_CHIP_MODE The PPARALLEL_SET_CHIP_MODE-typed callback routine sets the operating mode of a parallel port. The system-supplied function driver for parallel ports supplies this routine. |
| PPARALLEL_TRY_ALLOCATE_ROUTINE The PPARALLEL_TRY_ALLOCATE_ROUTINE-typed (ISR) callback routine attempts to allocate a parallel port at IRQL = DIRQL. The system-supplied function driver for parallel ports supplies this routine. |
| PPARALLEL_TRY_SELECT_ROUTINE The PPARALLEL_TRY_SELECT_ROUTINE-typed callback routine selects an IEEE 1284.3 daisy chain device or an IEEE 1284 end-of-chain device that is attached to a parallel port. The system-supplied function driver for parallel ports supplies this routine. |
| PPARALLEL_WRITE The PPARALLEL_WRITE-typed callback routine writes data to a parallel device. The system-supplied bus driver for parallel ports supplies this routine. |
| PTERMINATE_IEEE_MODE The PTERMINATE_IEEE_MODE-typed callback routine terminates the current IEEE operating mode and sets the mode to IEEE 1284-compatible. The system-supplied bus driver for parallel ports supplies this routine. |
Structures
| MORE_PARALLEL_PORT_INFORMATION The MORE_PARALLEL_PORT_INFORMATION structure specifies information about the system interface that supports the operation of a parallel port. |
| PARALLEL_1284_COMMAND The PARALLEL_1284_COMMAND structure specifies information that a client uses to select and deselect an IEEE 1284.3 daisy-chain device or an IEEE 1284 end-of-chain device. |
| PARALLEL_CHIP_MODE The PARALLEL_CHIP_MODE structure specifies the operating mode of a parallel port. |
| PARALLEL_INTERRUPT_INFORMATION The PARALLEL_INTERRUPT_INFORMATION structure specifies information that a kernel-mode driver can use in the context of an ISR that the driver connects to a parallel port. |
| PARALLEL_INTERRUPT_SERVICE_ROUTINE The PARALLEL_INTERRUPT_SERVICE_ROUTINE structure specifies interrupt services that a kernel-mode driver can connect to the operation of a parallel port. |
| PARALLEL_PNP_INFORMATION The PARALLEL_PNP_INFORMATION structure specifies information about the capabilities of a parallel port. |
| PARALLEL_PORT_INFORMATION The PARALLEL_PORT_INFORMATION structure specifies information about the resources assigned to a parallel port, the capabilities of the parallel port, and pointers to callback routines that a kernel-mode driver can use to operate the parallel port. |
| PARCLASS_INFORMATION The PARCLASS_INFORMATION structure specifies information about a parallel port, pointers to callback routines to operate a parallel port, and pointers to callback routines to read and write to a parallel device. |
Feedback
Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see: https://aka.ms/ContentUserFeedback.
Submit and view feedback for