IMiniportWaveCyclicStream interface (portcls.h)
The IMiniportWaveCyclicStream
interface represents the wave stream that flows through a pin on a WaveCyclic filter. The filter wraps a WaveCyclic rendering or capture device and is implemented by pairing a WaveCyclic port driver with a WaveCyclic miniport driver. The miniport driver implements the IMiniportWaveCyclicStream
interface and exposes it to the port driver. The miniport driver creates a stream object with this interface when the port driver calls the miniport driver's IMiniportWaveCyclic::NewStream method. IMiniportWaveCyclicStream
inherits from the IUnknown interface.
The IMiniportWaveCyclicStream
interface provides methods for managing a single stream of incoming or outgoing audio wave data. This is the interface that exposes most of the miniport driver's functionality.
The IMiniportWaveCyclicStream interface inherits from the IUnknown interface.
The IMiniportWaveCyclicStream interface has these methods.
IMiniportWaveCyclicStream::GetPosition The GetPosition method gets the current position of the stream. |
IMiniportWaveCyclicStream::NormalizePhysicalPosition The NormalizePhysicalPosition method converts a physical buffer position to a time-based value. |
IMiniportWaveCyclicStream::SetFormat The SetFormat method sets the KS data format of the wave stream. |
IMiniportWaveCyclicStream::SetNotificationFreq The SetNotificationFreq method controls the frequency at which notification interrupts are generated by setting the interval between successive interrupts. |
IMiniportWaveCyclicStream::SetState The SetState method sets the new state of playback or recording for the stream. |
IMiniportWaveCyclicStream::Silence The Silence method is used to copy silence samples to a specified buffer. |
Requirement | Value |
---|---|
Target Platform | Windows |
Header | portcls.h |