HW_STARTIO callback function (storport.h)
The Storport driver calls the HwStorStartIo routine one time for each incoming I/O request.
Syntax
HW_STARTIO HwStartio;
BOOLEAN HwStartio(
PVOID DeviceExtension,
PSCSI_REQUEST_BLOCK Srb
)
{...}
Parameters
DeviceExtension
A pointer to the miniport driver's per HBA storage area.
Srb
A pointer to the SCSI request block to be started.
Return value
HwStorStartIo returns TRUE if the request was successfully initiated. Otherwise, it returns FALSE.
Remarks
HwStorStartIo initiates an I/O operation. StorPort is designed to use a miniport's private data that is prepared in HwStorBuildIo and stored in either DeviceExtension or Srb->SrbExtension. Because HwStorBuildIo is called without spin locks, the best driver performance is achieved by preparing as much data as possible in HwStorBuildIo.
Storport calls HwStorStartIo in the following ways:
For storage non-virtual miniport drivers, depending on the value of SynchronizationModel set in PORT_CONFIGURATION_INFORMATION, Storport always calls HwStorStartIo at the same IRQL and uses an internal spin lock to ensure that I/O requests are initiated sequentially. The IRQL is either DISPATCH_LEVEL (full-duplex mode) or DIRQL (half-duplex mode).
When handling I/O in half-duplex mode, the HwStorStartIo routine does not have to acquire its own spin lock. Also, memory allocation using StorPortAllocatePool and mutual exclusion via StorPortAcquireSpinLock are not allowed in the HwStorStartIo routine. In full-duplex mode, StorPortAllocatePool and StorPortAcquireSpinLock may be used in the HwStorStartIo routine.
If a non-virtual miniport supports the concurrent channels optimization (STOR_PERF_CONCURRENT_CHANNELS set by StorPortInitializePerfOpts), multiple calls to HwStorStartIo concurrently are possible. In this case, the miniport will need to ensure that any shared resources are protected by a lock. With this performance optimization, Storport will not acquire the StartIo lock prior to calling HwStorStartIo and the miniport must provide its own lock if required.
For storage virtual miniport drivers, Storport calls HwStorStartIo at any IRQL <= DISPATCH_LEVEL and does not use an internal spin lock. The HwStorStartIo routine can acquire its own spin lock by calling StorPortAcquireSpinLock. Also, calls to StorPortAllocatePool are allowed in the HwStorStartIo routine of a storage virtual miniport driver.
The SRB is expected to be completed when SCSI status is received. When the Storport driver completes the SRB by calling StorPortNotification with a NotificationType of RequestComplete, an SRB is expected to return one of the following values in the SrbStatus field of the Srb:
SRB_STATUS_SUCCESS
- Indicates that the Srb was sent and SCSI status (possibly with data) was returned.
- Storport returns the data and status to the caller.
- Miniport action is none, except to complete the request by using StorPortNotification for RequestComplete, probably from the HwStorDpcRoutine.
SRB_STATUS_BUSY
- Indicates that there is a temporary problem with sending the Srb (for example, adapter registers or buffers are busy).
- Storport discards the original Srb extension that Srb->SrbExtension points to and issues a new one. Storport sends the original Srb with the newly issued Srb extension in subsequent calls to HwStorBuildIo and HwStorStartIo. All data in the original Srb extension will be lost.
- The miniport should not update the Srb's DataTransferLength.
- Because a new Srb extension is issued, the miniport must make sure that it never issues SRB_STATUS_BUSY in the middle of a SCSI transaction. After the transaction is started, it must be completed or canceled. Hardware busy states during the transaction must be handled by the miniport driver.
The name HwStorStartIo is a placeholder to describe the miniport routine set in the HwStartIo member of HW_INITIALIZATION_DATA structure. This structure is passed in the HwInitializationData parameter of StorPortInitialize. The actual prototype of this routine is defined in Storport.h as follows:
typedef
BOOLEAN
(*PHW_STARTIO) (
_In_ PVOID DeviceExtension,
_In_ PSCSI_REQUEST_BLOCK Srb
);
Starting in Windows 8, the Srb parameter can point to either SCSI_REQUEST_BLOCK or STORAGE_REQUEST_BLOCK. If the function identifier in the Function field of Srb is SRB_FUNCTION_STORAGE_REQUEST_BLOCK, the SRB is a STORAGE_REQUEST_BLOCK request structure.
Examples
To define a HwStorStartIo callback routine, you must first provide a function declaration that Static Driver Verifier (SDV) and other verification tools require, as shown in the following code example:
To define an HwStorStartIo callback function, you must first provide a function declaration that identifies the type of callback function you’re defining. Windows provides a set of callback function types for drivers. Declaring a function using the callback function types helps Code Analysis for Drivers, Static Driver Verifier (SDV), and other verification tools find errors, and it’s a requirement for writing drivers for the Windows operating system.
For example, to define a HwStorStartIo callback routine that is named MyHwStartIo, use the HW_STARTIO type and implement your callback routine as follows:
HW_STARTIO MyHwStartIo
BOOLEAN
MyHwStartIo (
_In_ PVOID DeviceExtension,
_In_ PSCSI_REQUEST_BLOCK Srb
);
{
...
}
The HW_STARTIO function type is defined in the Storport.h header file. To more accurately identify errors when you run the code analysis tools, be sure to add the _Use_decl_annotations_ annotation to your function definition. The _Use_decl_annotations_ annotation ensures that the annotations applied to the HW_STARTIO function type in the header file are used. For more information about the requirements for function declarations, see Declaring Functions Using Function Role Types for Storport Drivers. For information about _Use_decl_annotations_, see Annotating Function Behavior.
Requirements
| Requirement | Value |
|---|---|
| Target Platform | Universal |
| Header | storport.h (include Storport.h) |
| IRQL | DISPATCH_LEVEL (See Remarks section.) |