HW_UNIT_CONTROL callback function (storport.h)

Article
10/21/2021

A miniport driver's HwStorUnitControl routine is called to perform synchronous operations to control the state of storage unit device.

Syntax

HW_UNIT_CONTROL HwUnitControl;

SCSI_UNIT_CONTROL_STATUS HwUnitControl(
  [in] PVOID DeviceExtension,
  [in] SCSI_UNIT_CONTROL_TYPE ControlType,
  [in] PVOID Parameters
)
{...}

Parameters

[in] DeviceExtension

A pointer to the miniport driver's per-unit storage area.

[in] ControlType

A SCSI_UNIT_CONTROL_TYPE value that specifies a unit control operation, where each control type initiates an action by the miniport driver. See SCSI_UNIT_CONTROL_TYPE for details.

[in] Parameters

Pointer to a structure or value that contains information related to the ControlType. All structures are caller-allocated. See SCSI_UNIT_CONTROL_TYPE for details.

Address

The address of the unit the control operation is specified for.

Return value

Depending on the control type, HwStorUnitControl returns one of the following SCSI_UNIT_CONTROL_STATUS values:

Return code	Description
ScsiUnitControlSuccess	The miniport driver completed the requested operation successfully.
ScsiUnitControlUnsuccessful	The unit control operation was not successful.

Remarks

Storport calls a miniport's HwStorUnitControl with a ScsiQuerySupportedControlTypes control type after the HBA has been initialized but before the first I/O. The miniport driver fills in the SCSI_SUPPORTED_CONTROL_TYPE_LIST structure at Parameters with the operations that it supports. After HwStorUnitControl returns from this call, the Storport driver calls the miniport driver's HwStorAdapterControl callback only for operations supported by the miniport.

Storport calls HwStorUnitControl to notify the miniport driver of a change to the unit device identified by Address, or that the miniport should perform a query or set operation on that unit, such as starting a unit or handling a power control operation for a unit.

The following table lists the current IRQL and the spinlock acquired when the control type is issued.

Control Type	IRQL	Spin lock
ScsiQuerySupportedControlTypes	PASSIVE_LEVEL	None
ScsiUnitUsage	PASSIVE_LEVEL	None
ScsiUnitStart	PASSIVE_LEVEL	None
ScsiUnitPower	DISPATCH_LEVEL	None
ScsiUnitPoFxPowerInfo	PASSIVE_LEVEL	None
ScsiUnitPoFxPowerRequired	DISPATCH_LEVEL	None
ScsiUnitPoFxPowerActive	DISPATCH_LEVEL	None
ScsiUnitPoFxPowerSetFState	DISPATCH_LEVEL	None
ScsiUnitPoFxPowerControl	DISPATCH_LEVEL	None
ScsiUnitRemove	PASSIVE_LEVEL	None
ScsiUnitSurpriseRemoval	PASSIVE_LEVEL	None
ScsiUnitRichDescription	PASSIVE_LEVEL	None
ScsiUnitQueryBusType	PASSIVE_LEVEL	None
ScsiUnitQueryFruId	PASSIVE_LEVEL	None

The name HwStorUnitControl is just a placeholder. The actual prototype of this routine is defined in storport.h as follows:

typedef
SCSI_UNIT_CONTROL_STATUS
HW_UNIT_CONTROL (
  _In_ PVOID  DeviceExtension,
  _In_ SCSI_UNIT_CONTROL_TYPE  ControlType,
  _In_ PVOID  Parameters
  );

Requirements

Requirement	Value
Minimum supported client	Windows 8
Target Platform	Universal
Header	storport.h (include Storport.h)
IRQL	See Remarks.

Share via