PFLUSH_ADAPTER_BUFFERS callback function (wdm.h)

The FlushAdapterBuffers routine flushes any data remaining in the system DMA controller's internal cache or in a bus-master adapter's internal cache at the end of a DMA transfer operation.



BOOLEAN PflushAdapterBuffers(
  [in] PDMA_ADAPTER DmaAdapter,
  [in] PMDL Mdl,
  [in] PVOID MapRegisterBase,
  [in] PVOID CurrentVa,
  [in] ULONG Length,
  [in] BOOLEAN WriteToDevice


[in] DmaAdapter

Pointer to the DMA_ADAPTER structure returned by IoGetDmaAdapter that represents the bus-master adapter or DMA controller.

[in] Mdl

Pointer to the MDL that describes the buffer previously passed in the driver's call to MapTransfer.

[in] MapRegisterBase

Specifies the map registers allocated for the DMA operation. The system passes this value to the driver's AdapterControl routine.

[in] CurrentVa

Pointer to the current virtual address in the buffer, described by the Mdl, where the I/O operation occurred. This value must be the same as the initial CurrentVa value passed to MapTransfer.

[in] Length

Specifies the length, in bytes, of the buffer.

[in] WriteToDevice

Specifies the direction of the DMA transfer operation: TRUE for a transfer from a buffer in system memory to the driver's device.

Return value

FlushAdapterBuffers returns TRUE if any data remaining in the DMA controller's or bus-master adapter's internal cache has been successfully flushed into system memory or out to the device.


FlushAdapterBuffers is not a system routine that can be called directly by name. This routine is callable only by pointer from the address returned in a DMA_OPERATIONS structure. Drivers obtain the address of this routine by calling IoGetDmaAdapter.

To ensure that a DMA transfer is complete, every driver that performs DMA operations must call FlushAdapterBuffers before completing the IRP that requested the DMA transfer and before freeing the map registers.

A driver can get the initial CurrentVa for the start of a packet-based DMA transfer by calling MmGetMdlVirtualAddress. However, the value returned is an index into the Mdl, rather than a valid virtual address. If the driver must split a large transfer request into more than one DMA operation, it must update CurrentVa and Length for each DMA operation.


Requirement Value
Minimum supported client Available starting with Windows 2000.
Target Platform Desktop
Header wdm.h (include Wdm.h, Ntddk.h, Ntifs.h)
DDI compliance rules IrqlDispatch(wdm)

See also