MSFT_StorageReliabilityCounter class
The MSFT_StorageReliabilityCounter class provides reliability statistics or counters reported by a storage device.
This information is dynamic and should be obtained from the storage device whenever needed.
The following syntax is simplified from MOF code and includes all inherited properties.
Syntax
class MSFT_StorageReliabilityCounter : MSFT_StorageObject
{
String DeviceId;
UInt8 Temperature;
UInt8 TemperatureMax;
UInt64 ReadErrorsTotal;
UInt64 ReadErrorsCorrected;
UInt64 ReadErrorsUncorrected;
UInt64 WriteErrorsTotal;
UInt64 WriteErrorsCorrected;
UInt64 WriteErrorsUncorrected;
String ManufactureDate;
UInt32 StartStopCycleCount;
UInt32 StartStopCycleCountMax;
UInt32 LoadUnloadCycleCount;
UInt32 LoadUnloadCycleCountMax;
UInt8 Wear;
UInt16 PowerOnHours;
UInt64 ReadLatencyMax;
UInt64 WriteLatencyMax;
UInt64 FlushLatencyMax;
};
Members
The MSFT_StorageReliabilityCounter class has these types of members:
Methods
The MSFT_StorageReliabilityCounter class has these methods.
| Method | Description |
|---|---|
| Reset | Resets reliability values. |
Properties
The MSFT_StorageReliabilityCounter class has these properties.
DeviceId
Data type: String
Access type: Read-only
An identifier that uniquely names the associated storage device. When associated with an MSFT_PhysicalDisk, it will be the same as its DeviceId member. When associated with an MSFT_Disk, it will be the same as its Number field.
FlushLatencyMax
Data type: UInt64
Access type: Read-only
Maximum latency experienced by a flush request, in milliseconds. A value greater than 10 seconds may indicate a problem with the disk or the HBA.
LoadUnloadCycleCount
Data type: UInt32
Access type: Read-only
The number of load-unload cycles that were performed by the storage device.
LoadUnloadCycleCountMax
Data type: UInt32
Access type: Read-only
The maximum number of load-unload cycles that can be performed by the storage device in normal operation.
ManufactureDate
Data type: String
Access type: Read-only
The year and week when the storage device was manufactured.
PowerOnHours
Data type: UInt16
Access type: Read-only
The number of hours that the storage device has been powered on since it was manufactured.
ReadErrorsCorrected
Data type: UInt64
Access type: Read-only
The number of read errors that were corrected by the storage device.
ReadErrorsTotal
Data type: UInt64
Access type: Read-only
The total number of read errors that were encountered by the storage device.
ReadErrorsUncorrected
Data type: UInt64
Access type: Read-only
The number of read errors that were not corrected by the storage device.
ReadLatencyMax
Data type: UInt64
Access type: Read-only
Maximum latency experienced by a read request, in milliseconds. A value greater than 10 seconds may indicate a problem with the disk or the HBA.
StartStopCycleCount
Data type: UInt32
Access type: Read-only
The number of start-stop cycles that were performed by the storage device.
StartStopCycleCountMax
Data type: UInt32
Access type: Read-only
The maximum number of start-stop cycles that can be performed by the storage device in normal operation.
Temperature
Data type: UInt8
Access type: Read-only
The current temperature of the storage device in degrees Celsius.
TemperatureMax
Data type: UInt8
Access type: Read-only
The maximum temperature in degrees Celsius at which the storage device is capable of normal operation.
Wear
Data type: UInt8
Access type: Read-only
The storage device wear indicator, in percentage. At 100 percent, the estimated wear limit will have been reached.
WriteErrorsCorrected
Data type: UInt64
Access type: Read-only
The number of write errors that were corrected by the storage device.
WriteErrorsTotal
Data type: UInt64
Access type: Read-only
The total number of write errors that were encountered by the storage device.
WriteErrorsUncorrected
Data type: UInt64
Access type: Read-only
The number of write errors that were not corrected by the storage device.
WriteLatencyMax
Data type: UInt64
Access type: Read-only
Maximum latency experienced by a write request, in milliseconds. A value greater than 10 seconds may indicate a problem with the disk or the HBA.
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | Windows 8 [desktop apps only] |
| Minimum supported server | Windows Server 2012 [desktop apps only] |
| Namespace | Root\Microsoft\Windows\Storage |
| MOF | Storagewmi.mof |