Upgrading Firmware for an NVMe Device
Updates to the firmware on an NVMe storage device are issued to the miniport driver for that device. Function commands for getting firmware information, downloading, and activating firmware images are issued to the miniport.
Firmware upgrade process
NVMe devices certified for Windows are capable of updating their firmware while the device is in operation. Firmware is updated using the IOCTL_SCSI_MINIPORT request containing the associated firmware control data formatted in an SRB. The update process involves:
Gather the firmware slot information to determine where to place the update. There are a few considerations in deciding where the firmware update will reside.
- How many slots are available?
- How many slots can hold an update? Some slots are read-only or hold images that must be retained if the ability to revert to a prior image is desired.
- Which slot contains the current active firmware image (the running firmware)?
In order to update the device, a slot is chosen that is writeable and not currently active. All existing image data in the selected slot is overwritten when the update is completed.
Download the new firmware image for a selected slot. Depending on the size of the image, this occurs in a single transfer operation or in successive transfers of multiple portions of the image. A portion of an image is limited by min(Controller Maximum Transfer Size, 512 KB).
In order to make the downloaded image the active firmware image, it is assigned to slot. The active firmware slot is then switched from the currently used slot to the slot assigned to the downloaded image. Depending on the type of download and the changes in the firmware image, a reboot of the system may be required. This is determined by the NVMe controller.
Miniport firmware control requests
Each function command is set in a FIRMWARE_REQUEST_BLOCK structure which is included with an SRB_IO_CONTROL in the buffer of an IOCTL_SCSI_MINIPORT request. The ControlCode member of SRB_IO_CONTROL is set to IOCTL_SCSI_MINIPORT_FIRMWARE to indicate a miniport firmware operation. Each function command has a related information structure located after the FIRMWARE_REQUEST_BLOCK. The following table lists each function command and the structures included in the system buffer for IOCTL_SCSI_MINIPORT.
| Function | Input data | Output data |
|---|---|---|
| FIRMWARE_FUNCTION_GET_INFO | SRB_IO_CONTROL + FIRMWARE_REQUEST_BLOCK | SRB_IO_CONTROL + FIRMWARE_REQUEST_BLOCK + STORAGE_FIRMWARE_SLOT_INFO |
| FIRMWARE_FUNCTION_DOWNLOAD | SRB_IO_CONTROL + FIRMWARE_REQUEST_BLOCK + STORAGE_FIRMWARE_DOWNLOAD | SRB_IO_CONTROL |
| FIRMWARE_FUNCTION_ACTIVATE | SRB_IO_CONTROL + FIRMWARE_REQUEST_BLOCK + STORAGE_FIRMWARE_ACTIVATE | SRB_IO_CONTROL |
The firmware functions and associated structures are defined in ntddscsi.h.
Firmware slot information
Firmware images are maintained on the device in locations called slots. It is necessary to find an available slot for the firmware image to reside when it is activated after a download. To find an available slot, an upgrade utility can send an information query to the device to receive the slot information descriptors. The following example function shows how to retrieve the information for all the firmware slots on a selected NVMe device.
// A device list item structure for an adapter
typedef struct _DEVICE_LIST {
HANDLE Handle;
STORAGE_ADAPTER_DESCRIPTOR AdapterDescriptor;
} DEVICE_LIST, *PDEVICE_LIST;
BOOL
DeviceGetFirmwareInfo(
_In_ PDEVICE_LIST DeviceList,
_In_ DWORD Index,
_Inout_ PUCHAR Buffer,
_In_ DWORD BufferLength,
_In_ BOOLEAN DisplayResult
)
/*++
Routine Description:
Retrieve the firmware and firmware slot information from NVMe controller.
Arguments:
DeviceList – a pointer to device array that contains disks information.
Index – the index of NVMe device in DeviceList array.
Buffer – a buffer for input and output.
BufferLength – the size of the buffer.
DisplayResult – print information on screen or not.
Return Value:
BOOLEAN
--*/
{
BOOL result;
ULONG returnedLength;
ULONG firmwareInfoOffset;
PSRB_IO_CONTROL srbControl;
PFIRMWARE_REQUEST_BLOCK firmwareRequest;
PSTORAGE_FIRMWARE_INFO firmwareInfo;
srbControl = (PSRB_IO_CONTROL)Buffer;
firmwareRequest = (PFIRMWARE_REQUEST_BLOCK)(srbControl + 1);
//
// The STORAGE_FIRMWARE_INFO is located after SRB_IO_CONTROL and FIRMWARE_RESQUEST_BLOCK
//
firmwareInfoOffset = ((sizeof(SRB_IO_CONTROL) + sizeof(FIRMWARE_REQUEST_BLOCK) - 1) / sizeof(PVOID) + 1) * sizeof(PVOID);
//
// Setup the SRB control with the firmware ioctl control info
//
srbControl->HeaderLength = sizeof(SRB_IO_CONTROL);
srbControl->ControlCode = IOCTL_SCSI_MINIPORT_FIRMWARE;
RtlMoveMemory(srbControl->Signature, IOCTL_MINIPORT_SIGNATURE_FIRMWARE, 8);
srbControl->Timeout = 30;
srbControl->Length = BufferLength - sizeof(SRB_IO_CONTROL);
//
// Set firmware request fields for FIRMWARE_FUNCTION_GET_INFO. This request is to the controller so
// FIRMWARE_REQUEST_FLAG_CONTROLLER is set in the flags
//
firmwareRequest->Version = FIRMWARE_REQUEST_BLOCK_STRUCTURE_VERSION;
firmwareRequest->Size = sizeof(FIRMWARE_REQUEST_BLOCK);
firmwareRequest->Function = FIRMWARE_FUNCTION_GET_INFO;
firmwareRequest->Flags = FIRMWARE_REQUEST_FLAG_CONTROLLER;
firmwareRequest->DataBufferOffset = firmwareInfoOffset;
firmwareRequest->DataBufferLength = BufferLength - firmwareInfoOffset;
//
// Send the request to get the device firmware info
//
result = DeviceIoControl(DeviceList[Index].Handle,
IOCTL_SCSI_MINIPORT,
Buffer,
BufferLength,
Buffer,
BufferLength,
&returnedLength,
NULL
);
//
// Format and display the firmware info
//
if (DisplayResult) {
if (!result) {
_tprintf(_T("\t Get Firmware Information Failed: 0x%X\n"), GetLastError());
} else {
UCHAR i;
TCHAR revision[16] = {0};
firmwareInfo = (PSTORAGE_FIRMWARE_INFO)((PUCHAR)srbControl + firmwareRequest->DataBufferOffset);
_tprintf(_T("\t ----Firmware Information----\n"));
_tprintf(_T("\t Support upgrade command: %s\n"), firmwareInfo->UpgradeSupport ? _T("Yes") : _T("No"));
_tprintf(_T("\t Slot Count: %d\n"), firmwareInfo->SlotCount);
_tprintf(_T("\t Current Active Slot: %d\n"), firmwareInfo->ActiveSlot);
if (firmwareInfo->PendingActivateSlot == STORAGE_FIRMWARE_INFO_INVALID_SLOT) {
_tprintf(_T("\t Pending Active Slot: %s\n\n"), _T("No"));
} else {
_tprintf(_T("\t Pending Active Slot: %d\n\n"), firmwareInfo->PendingActivateSlot);
}
for (i = 0; i < firmwareInfo->SlotCount; i++) {
RtlCopyMemory(revision, &firmwareInfo->Slot[i].Revision.AsUlonglong, 8);
_tprintf(_T("\t\t Slot Number: %d\n"), firmwareInfo->Slot[i].SlotNumber);
_tprintf(_T("\t\t Slot Read Only: %s\n"), firmwareInfo->Slot[i].ReadOnly ? _T("Yes") : _T("No"));
_tprintf(_T("\t\t Revision: %s\n"), revision);
_tprintf(_T("\n"));
}
}
_tprintf(_T("\n"));
}
return result;
}
Slot information is returned in an array of STORAGE_FIRMWARE_SLOT_INFO structures. Each structure indicates the activation status and availability of the firmware slot. Conditions for availability are:
- The ReadOnly member is set to 0.
- The slot is not the active slot indicated by slot number in the ActiveSlot member of STORAGE_FIRMWARE_INFO.
- The PendingActiveSlot member of STORAGE_FIRMWARE_INFO is set to STORAGE_FIRMWARE_INFO_INVALID_SLOT.
- The PendingActiveSlot member of STORAGE_FIRMWARE_INFO is not set to the desired slot.
Also, if the slot status meets the conditions for availability but the Info string contains valid revision data, that is nonzero bytes, then the slot contains a valid firmware image but it may be replaced. All zeros in the Info string indicate an empty slot.
Example: Firmware upgrade - slot selection, download, and activation
An upgrade utility will perform the three steps mentioned earlier to update the firmware in the controller. As an example, the following upgrade routine contains code for each step in the process. The slot discovery step, shown in the DeviceGetFirmwareInfo example, is called by the upgrade routine to select an available slot. The image download and activation steps are demonstrated directly following slot selection. Within each step, the use of the corresponding function command is shown.
During the download step, a firmware image file is read into an allocated buffer and the buffer contents are transferred to the controller. If the firmware image file is larger than the size of the buffer, the image file is read multiple times and that portion of the firmware image is transferred until the entire file is read.
Following the completion of the firmware image download, the activation step requires two actions from the controller. First, the selected slot is assigned to the firmware image, and second, the selected slot is set as the active slot.
VOID
DeviceFirmwareUpgrade(
_In_ PDEVICE_LIST DeviceList,
_In_ DWORD Index,
_In_ TCHAR* FileName
)
/*++
Routine Description:
Performs a firmware upgrade to the NVMe controller. The an available firmware
slot is selected, the firmware is downloaded to the controller from an image
file, and the new firmware is activated.
Arguments:
DeviceList – a pointer to device array that contains disks information.
Index – the index of NVMe device in DeviceList array.
FileName – the name of the firmware upgrade image file.
Return Value:
None
--*/
{
BOOL result;
PUCHAR buffer = NULL;
ULONG bufferSize;
ULONG firmwareStructureOffset;
ULONG imageBufferLength;
PSRB_IO_CONTROL srbControl;
PFIRMWARE_REQUEST_BLOCK firmwareRequest;
PSTORAGE_FIRMWARE_INFO firmwareInfo;
PSTORAGE_FIRMWARE_DOWNLOAD firmwareDownload;
PSTORAGE_FIRMWARE_ACTIVATE firmwareActivate;
ULONG slotNumber;
ULONG returnedLength;
ULONG i;
HANDLE fileHandle = NULL;
ULONG imageOffset;
ULONG readLength;
BOOLEAN moreToDownload;
//
// The STORAGE_FIRMWARE_INFO is located after SRB_IO_CONTROL and FIRMWARE_RESQUEST_BLOCK
//
firmwareStructureOffset = ((sizeof(SRB_IO_CONTROL) + sizeof(FIRMWARE_REQUEST_BLOCK) - 1) / sizeof(PVOID) + 1) * sizeof(PVOID);
//
// The Max Transfer Length limits the part of buffer that may need to transfer to controller, not the whole buffer.
//
bufferSize = min(DeviceList[Index].AdapterDescriptor.MaximumTransferLength, 2 * 1024 * 1024);
bufferSize += firmwareStructureOffset;
bufferSize += FIELD_OFFSET(STORAGE_FIRMWARE_DOWNLOAD, ImageBuffer);
buffer = (PUCHAR)malloc(bufferSize);
if (buffer == NULL) {
_tprintf(_T("\t FirmwareUpgrade - Allocate buffer failed: 0x%X\n"), GetLastError());
return;
}
//
// calculate the space available for the firmware image portion of the buffer allocation
//
imageBufferLength = bufferSize - firmwareStructureOffset - sizeof(STORAGE_FIRMWARE_DOWNLOAD);
RtlZeroMemory(buffer, bufferSize);
// ---------------------------------------------------------------------------
// ( 1 ) SELECT A SUITABLE FIRMWARE SLOT
// ---------------------------------------------------------------------------
//
// Get firmware slot information data.
//
result = DeviceGetFirmwareInfo(DeviceList, Index, buffer, bufferSize, FALSE);
if (result == FALSE) {
_tprintf(_T("\t FirmwareUpgrade: Get Firmware Information Failed: 0x%X\n"), GetLastError());
goto Exit;
}
//
// Set the request structure pointers
//
srbControl = (PSRB_IO_CONTROL)buffer;
firmwareRequest = (PFIRMWARE_REQUEST_BLOCK)(srbControl + 1);
firmwareInfo = (PSTORAGE_FIRMWARE_INFO)((PUCHAR)srbControl + firmwareRequest->DataBufferOffset);
if (srbControl->ReturnCode != FIRMWARE_STATUS_SUCCESS) {
_tprintf(_T("\t FirmwareUpgrade - get firmware info failed. srbControl->ReturnCode %d.\n"), srbControl->ReturnCode);
goto Exit;
}
//
// SelectFind the first writable slot.
//
slotNumber = (ULONG)-1;
if (firmwareInfo->UpgradeSupport) {
for (i = 0; i < firmwareInfo->SlotCount; i++) {
if (firmwareInfo->Slot[i].ReadOnly == FALSE) {
slotNumber = firmwareInfo->Slot[i].SlotNumber;
break;
}
}
}
//
// If no writable slot is found, bypass downloading and activation
//
if (slotNumber == (ULONG)-1) {
_tprintf(_T("\t FirmwareUpgrade - No writable Firmware slot.\n"));
goto Exit;
}
// ---------------------------------------------------------------------------
// ( 2 ) DOWNLOAD THE FIRMWARE IMAGE TO THE CONTROLLER
// ---------------------------------------------------------------------------
//
// initialize image length and offset
//
imageBufferLength = (imageBufferLength / sizeof(PVOID)) * sizeof(PVOID);
imageOffset = 0;
readLength = 0;
moreToDownload = TRUE;
//
// Open image file and download it to controller.
//
if (FileName == NULL) {
_tprintf(_T("\t FirmwareUpgrade - No firmware file specified.\n"));
goto Exit;
}
fileHandle = CreateFile(FileName, // file to open
GENERIC_READ, // open for reading
FILE_SHARE_READ, // share for reading
NULL, // default security
OPEN_EXISTING, // existing file only
FILE_ATTRIBUTE_NORMAL, // normal file
NULL); // no attr. template
if (fileHandle == INVALID_HANDLE_VALUE) {
_tprintf(_T("\t FirmwareUpgrade - unable to open file \"%s\" for read.\n"), FileName);
goto Exit;
}
//
// Read and download the firmware from the image file into image buffer length portions. Send the
// image portion to the controller.
//
while (moreToDownload) {
RtlZeroMemory(buffer, bufferSize);
//
// Setup the SRB control with the firmware ioctl control info
//
srbControl->HeaderLength = sizeof(SRB_IO_CONTROL);
srbControl->ControlCode = IOCTL_SCSI_MINIPORT_FIRMWARE;
RtlMoveMemory(srbControl->Signature, IOCTL_MINIPORT_SIGNATURE_FIRMWARE, 8);
srbControl->Timeout = 30;
srbControl->Length = bufferSize - sizeof(SRB_IO_CONTROL);
//
// Set firmware request fields for FIRMWARE_FUNCTION_DOWNLOAD. This request is to the controller so
// FIRMWARE_REQUEST_FLAG_CONTROLLER is set in the flags
//
firmwareRequest->Version = FIRMWARE_REQUEST_BLOCK_STRUCTURE_VERSION;
firmwareRequest->Size = sizeof(FIRMWARE_REQUEST_BLOCK);
firmwareRequest->Function = FIRMWARE_FUNCTION_DOWNLOAD;
firmwareRequest->Flags = FIRMWARE_REQUEST_FLAG_CONTROLLER;
firmwareRequest->DataBufferOffset = firmwareStructureOffset;
firmwareRequest->DataBufferLength = bufferSize - firmwareStructureOffset;
//
// Initialize the firmware data buffer pointer to the proper position after the request structure
//
firmwareDownload = (PSTORAGE_FIRMWARE_DOWNLOAD)((PUCHAR)srbControl + firmwareRequest->DataBufferOffset);
if (ReadFile(fileHandle, firmwareDownload->ImageBuffer, imageBufferLength, &readLength, NULL) == FALSE) {
_tprintf(_T("\t FirmwareUpgrade - Read firmware file failed.\n"));
goto Exit;
}
if (readLength == 0) {
moreToDownload = FALSE;
break;
}
if ((readLength % sizeof(ULONG)) != 0) {
_tprintf(_T("\t FirmwareUpgrade - Read firmware file failed.\n"));
}
//
// Set the download parameters and adjust the offset for this portion of the firmware image
//
firmwareDownload->Version = 1;
firmwareDownload->Size = sizeof(STORAGE_FIRMWARE_DOWNLOAD);
firmwareDownload->Offset = imageOffset;
firmwareDownload->BufferSize = readLength;
//
// download this portion of firmware to the device
//
result = DeviceIoControl(DeviceList[Index].Handle,
IOCTL_SCSI_MINIPORT,
buffer,
bufferSize,
buffer,
bufferSize,
&returnedLength,
NULL
);
if (result == FALSE) {
_tprintf(_T("\t FirmwareUpgrade - IOCTL - firmware download failed. 0x%X.\n"), GetLastError());
goto Exit;
}
if (srbControl->ReturnCode != FIRMWARE_STATUS_SUCCESS) {
_tprintf(_T("\t FirmwareUpgrade - firmware download failed. srbControl->ReturnCode %d.\n"), srbControl->ReturnCode);
goto Exit;
}
//
// Update Image Offset for next iteration.
//
imageOffset += readLength;
}
// ---------------------------------------------------------------------------
// ( 3 ) ACTIVATE THE FIRMWARE SLOT ASSIGNED TO THE UPGRADE
// ---------------------------------------------------------------------------
//
// Activate the newly downloaded image with the assigned slot.
//
RtlZeroMemory(buffer, bufferSize);
//
// Setup the SRB control with the firmware ioctl control info
//
srbControl->HeaderLength = sizeof(SRB_IO_CONTROL);
srbControl->ControlCode = IOCTL_SCSI_MINIPORT_FIRMWARE;
RtlMoveMemory(srbControl->Signature, IOCTL_MINIPORT_SIGNATURE_FIRMWARE, 8);
srbControl->Timeout = 30;
srbControl->Length = bufferSize - sizeof(SRB_IO_CONTROL);
//
// Set firmware request fields for FIRMWARE_FUNCTION_ACTIVATE. This request is to the controller so
// FIRMWARE_REQUEST_FLAG_CONTROLLER is set in the flags
//
firmwareRequest->Version = FIRMWARE_REQUEST_BLOCK_STRUCTURE_VERSION;
firmwareRequest->Size = sizeof(FIRMWARE_REQUEST_BLOCK);
firmwareRequest->Function = FIRMWARE_FUNCTION_ACTIVATE;
firmwareRequest->Flags = FIRMWARE_REQUEST_FLAG_CONTROLLER;
firmwareRequest->DataBufferOffset = firmwareStructureOffset;
firmwareRequest->DataBufferLength = bufferSize - firmwareStructureOffset;
//
// Initialize the firmware activation structure pointer to the proper position after the request structure
//
firmwareActivate = (PSTORAGE_FIRMWARE_ACTIVATE)((PUCHAR)srbControl + firmwareRequest->DataBufferOffset);
//
// Set the activation parameters with the available slot selected
//
firmwareActivate->Version = 1;
firmwareActivate->Size = sizeof(STORAGE_FIRMWARE_ACTIVATE);
firmwareActivate->SlotToActivate = (UCHAR)slotNumber;
//
// Send the activation request
//
result = DeviceIoControl(DeviceList[Index].Handle,
IOCTL_SCSI_MINIPORT,
buffer,
bufferSize,
buffer,
bufferSize,
&returnedLength,
NULL
);
if (result == FALSE) {
_tprintf(_T("\t FirmwareUpgrade - IOCTL - firmware activate failed. 0x%X.\n"), GetLastError());
goto Exit;
}
//
// Display status result from firmware activation
//
switch (srbControl->ReturnCode) {
case FIRMWARE_STATUS_SUCCESS:
_tprintf(_T("\t FirmwareUpgrade - firmware activate succeeded.\n"));
break;
case FIRMWARE_STATUS_POWER_CYCLE_REQUIRED:
_tprintf(_T("\t FirmwareUpgrade - firmware activate succeeded. PLEASE REBOOT COMPUTER.\n"));
break;
case FIRMWARE_STATUS_ILLEGAL_REQUEST:
case FIRMWARE_STATUS_INVALID_PARAMETER:
case FIRMWARE_STATUS_INPUT_BUFFER_TOO_BIG:
_tprintf(_T("\t FirmwareUpgrade - firmware activate parameter error. srbControl->ReturnCode %d.\n"), srbControl->ReturnCode);
break;
case FIRMWARE_STATUS_INVALID_SLOT:
_tprintf(_T("\t FirmwareUpgrade - firmware activate, slot number invalid.\n"));
break;
case FIRMWARE_STATUS_INVALID_IMAGE:
_tprintf(_T("\t FirmwareUpgrade - firmware activate, invalid firmware image.\n"));
break;
case FIRMWARE_STATUS_ERROR:
case FIRMWARE_STATUS_CONTROLLER_ERROR:
_tprintf(_T("\t FirmwareUpgrade - firmware activate, error returned.\n"));
break;
default:
_tprintf(_T("\t FirmwareUpgrade - firmware activate, unexpected error. srbControl->ReturnCode %d.\n"), srbControl->ReturnCode);
break;
}
Exit:
if (fileHandle != NULL) {
CloseHandle(fileHandle);
}
if (buffer != NULL) {
free(buffer);
}
return;
}
Note
Downloading multiple firmware images simultaneously is not supported. A single firmware download is always followed by a single firmware activation.
A firmware image already resident in a slot can be reactivated by using just the activate function command with the corresponding slot number.
The IOCTL_SCSI_MINIPORT_FIRMWARE control code for SRB I/O control is available starting with Windows 8.1.
Feedback
Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see: https://aka.ms/ContentUserFeedback.
Submit and view feedback for