Wlan Test - Scan for Networks - (WoW64 for Arm64) (1205c9a8-ac68-4ac7-8656-64efe85a663e)

  • Article

This automated test issues a scan request and enumerates networks after the scan.

Test details

   
Specifications
  • Device.Network.WLAN.SupportConnectionToAP.ConnectionToAP
Platforms
  • Windows 10, client editions (Arm64)
  • Windows 10, mobile edition (Arm64)
Supported Releases
  • Windows 10
  • Windows 10, version 1511
  • Windows 10, version 1607
  • Windows 10, version 1703
  • Windows 10, version 1709
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 1
Category Scenario
Timeout (in minutes) 5
Requires reboot false
Requires special configuration true
Type automatic

 

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

Running the test

This test is only valid on systems with a Wireless LAN adapter. This test will do the following:

  1. Test will disable the device.
  2. Test will enable the device.
  3. Test will start a scan with the option to flush set to true.
  4. Test will enumerate available networks after a completed scan.

Note

  Possible Failure Points:

  • Test will fail if there are no networks in the enumerated list.
  • Test will fail if scan complete event is not returned in less than six seconds.
  • Test will fail if a scan failure event is returned.

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.

More information

Parameters

Parameter name Parameter description
EnableTracing Enable Tracing
queryTestDeviceID Device id of device under test