TDI filters and LSPs are not allowed

  • Article

This test verifies that no TDI Filters or LSPs are installed by the driver or associated software packages during installation or usage.

Test details

   
Specifications
  • Device.DevFund.Security.NoTDIFilterAndLSP
  • Filter.Driver.Security.NoTDIFilterAndLSP
  • System.Fundamentals.Security.NoTDIFilterAndLSP
Platforms
  • Windows 10, client editions (x86)
  • Windows 10, client editions (x64)
  • Windows 10, client editions (Arm64)
  • Windows Server 2016 (x64) and later
Supported Releases
  • Windows 10
  • Windows 10, version 1511
  • Windows 10, version 1607
  • Windows 10, version 1703
  • Windows 10, version 1709
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 1
Category Compatibility
Timeout (in minutes) 0
Requires reboot false
Requires special configuration false
Type automatic

 

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

Running the test

Before you run the test, complete the test setup as described in the test requirements: WDTF System Fundamentals Testing Prerequisites.

Note: SecureBoot must be disabled to run this test.

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.

For troubleshooting information, see Troubleshooting System Fundamentals Testing.

This test returns Pass or Fail. To review test details, review the test log from Windows Hardware Lab Kit (Windows HLK) Studio.