Wlan Test - Query Interface Properties (38099fc3-b893-4165-9727-5d4ce70d479e)

This automated test queries the interface for a variety of common properties.

Note

Microsoft will be accepting 802.11ad WDI drivers for HLK certification for the Windows 10 Fall Creators Update (1709) to facilitate broad distribution and testing among Windows Insiders and ecosystem partners. However, due to the lack of broad testing of 802.11ad WDI functionality, this feature is enabled as a developer preview for the Windows 10, version 1709 release. 

If a problem is encountered with 802.11ad functionality, please contact your 802.11ad IHV partner for support assistance.   Microsoft is committed to supporting 802.11ad Wi-Fi connectivity in a future version of Windows 10 in order to enable wireless docking and other scenarios.

Test details

   
Specifications
  • Device.Network.WLAN.SupportConnectionToAP.ConnectionToAP
Platforms
  • Windows 10, client editions (x86)
  • Windows 10, client editions (x64)
  • Windows 10, mobile edition (Arm)
Supported Releases
  • Windows 10
  • Windows 10, version 1511
  • Windows 10, version 1607
  • Windows 10, version 1703
  • Windows 10, version 1709
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 1
Category Development
Timeout (in minutes) 5
Requires reboot false
Requires special configuration true
Type automatic

 

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

Running the test

Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.

This test queries the device for the following properties:

  • IsMediaStreamingEnabled

  • IsBackgroundScanEnabled

  • IsSafeModeSupported

  • sSafeModeCertified

  • GetCurrentOperationMode

  • GetInterfaceState

  • sManagementFrameProtectionSupported

  • IsHostedNetworkCapable

  • enumerate all radios and radio states

  • IsAutoConfigEnabled

  • enumerate all support infrastructure cipher pairs

  • devices without Connected Standby must enumerate supported adhoc cipher pairs

  • GetBSSMode

  • GetCountryList

  • GetConnectionAttributes

  • GetRSSi

  • GetChannel

Any returned failure in the WLAN service API from the device these capabilities are queried will result in a failure in the test

The test will fail if the following is true:

  • There are less than three infrastructure cipher pairs.

  • If DOT11_AUTH_ALGO_RSNA_PSK is not implemented.

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.

For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.

More information

Parameters

Parameter name Parameter description
EnableTracing Enable Tracing
queryTestDeviceID Device id of device under test