Share via

Wlan Test - Wlan Device Reset Check - (WoW64 for Arm64) (665d8378-8865-40a1-839e-a50cf303919d)

  • Article

This automated test checks to make sure the wlan device has properly implemented the reset recovery functionality

Test details

   
Specifications
  • System.Client.WLAN.HangDetectionAndRecovery.WlanHangDetectionAndRecovery
Platforms
  • Windows 10, client editions (Arm64)
  • Windows 10, mobile edition (Arm64)
Supported Releases
  • Windows 10
  • Windows 10, version 1511
  • Windows 10, version 1607
  • Windows 10, version 1703
  • Windows 10, version 1709
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 2
Category Development
Timeout (in minutes) 10
Requires reboot false
Requires special configuration true
Type automatic

 

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

Running the test

This test is only valid on systems with a Wireless LAN adapter that has implemented Wlan Hang Detection and Recovery. This test does the following:

  1. Initiate a hang in the adapter
  2. Verify the adatper was removed
  3. Verify the adapter was re-enumerated

Note

  Possible Failure Points:   - Adapter was not removed from the system   - Adapter was not re-enumerated by the system

 

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.

More information

Parameters

Parameter name Parameter description
EnableTracing Enable Tracing