Note
Access to this page requires authorization. You can try signing in or changing directories.
Access to this page requires authorization. You can try changing directories.
This automated test validates whether a test computer was booted in Secure Boot mode.
Test details
Specifications |
|
Platforms |
|
Supported Releases |
|
Expected run time (in minutes) | 60 |
Category | Scenario |
Timeout (in minutes) | 3600 |
Requires reboot | false |
Requires special configuration | false |
Type | automatic |
Additional documentation
Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):
Running the test
The test computer's BIOS settings must be configured as follows:
- Boot mode: UEFI
- Secure Boot: Enabled
Troubleshooting
For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.
Error 1: UEFI is enabled, but Secure Boot is disabled
Secure Boot is not enabled in the BIOS settings, or is not supported.
Workaround: Configure the BIOS settings to enable Secure Boot.
Error 2: UEFI is disabled
The system is configured to boot in Legacy BIOS mode.
Workaround: Configure the BIOS settings to set the boot mode to UEFI.