Share via

Camera Driver Controls System Test - CAMERA_PROFILES - Verify KSCAMERAPROFILE_VideoConferencing enum all

  • Article

Test to validate key user scenarios in the camera stack

Test details

   
Specifications
  • System.Client.Camera.Base.CameraControls
Platforms
  • Windows 10, client editions (x86)
  • Windows 10, client editions (x64)
  • Windows 10, client editions (Arm64)
  • Windows 10, mobile edition (Arm)
  • Windows 10, mobile edition (Arm64)
Supported Releases
  • Windows 10
  • Windows 10, version 1511
  • Windows 10, version 1607
  • Windows 10, version 1703
  • Windows 10, version 1709
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 15
Category Scenario
Timeout (in minutes) 25
Requires reboot false
Requires special configuration false
Type automatic

 

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

Running the test

This test validates camera functionality if the driver supports the extended control in the title. If the driver does not support this control, skip this test. This is an optional control. If the driver implements a control handle, the following checks will run (based on the definition of the controls):

  • The test verifies default values and validates that the appropriate property is advertised on the correct pin or filter level.
  • The test enumerates possible control values during the times that pins are streaming and not streaming.
  • Scenario tests are run on the control to validate end-to-end functionality.

More information

Parameters

Parameter name Parameter description
DriverVerifierExcludedFlags Driver Verifier flags that may be manually excluded for the test run

 

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.