UCSI Set Power Level - Reset On PPM Reset [Type-C MUTT]

Verifies that the system resets to the default power level following PPM reset.

Test details

   
Specifications
  • System.Fundamentals.SystemUSB.USBC.USBTypeCUCSI.USBTypeCUCSI
Platforms
  • Windows 10, client editions (x86)
  • Windows 10, client editions (x64)
  • Windows 10, client editions (Arm64)
  • Windows Server 2016 (x64)
  • Windows 10, mobile edition (Arm)
  • Windows 10, mobile edition (Arm64)
Supported Releases
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 3
Category Compatibility
Timeout (in minutes) 10
Requires reboot false
Requires special configuration true
Type automatic

More Information

Parameters

Parameter Name Parameter Description
WaitTimeMultiplier For tests that require the Type-C MUTT, this is a multiplier of the generic wait times that the test will wait for the Type-C MUTT to be enumerated. In general, the default times should be sufficient, but some platforms require additional time.
UcsiConnectorNumber UCSI connector that the Type-C MUTT device is connected to.
MaxSourceMilliwatts Maximum wattage (mW) the SUT can source. Only needed if PPM does not support GET_PDOs command.
SetPowerLevelCommandSupported Set to False for UCSI v1.1 that does not support SET_POWER_LEVEL command. Can ignore for UCSI v1.0.

Additional Documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.