Enables you to shut down or restart local or remote computers, one at a time.
shutdown [/i | /l | /s | /sg | /r | /g | /a | /p | /h | /e | /o] [/hybrid] [/fw] [/f] [/m \\computer][/t xxx][/d [p|u:]xx:yy [/c "comment"]]
|/i||Displays the Remote Shutdown box. The /i option must be the first parameter following the command. If /i is specified, all other options are ignored.|
|/l||Logs off the current user immediately, with no time-out period. You cannot use /l with /m or /t.|
|/s||Shuts down the computer.|
|/sg||Shuts down the computer. On the next boot, if Automatic Restart Sign-On is enabled, the device automatically signs in and locks based on the last interactive user. After sign in, it restarts any registered applications.|
|/r||Restarts the computer after shutdown.|
|/g||Shuts down the computer. On the next restart, if Automatic Restart Sign-On is enabled, the device automatically signs in and locks based on the last interactive user. After sign in, it restarts any registered applications.|
|/a||Aborts a system shutdown. Effective only during the time-out period. To use /a, you must also use the /m option.|
|/p||Turns off the local computer only (not a remote computer)—with no time-out period or warning. You can use /p only with /d or /f. If your computer doesn't support power-off functionality, it will shut down when you use /p, but the power to the computer will remain on.|
|/h||Puts the local computer into hibernation, if hibernation is enabled. The /f switch can be used with the /h switch.|
|hybrid||Shuts down the device and prepares it for fast startup. This option must be used with the /s option.|
|/fw||Combining this option with a shutdown option causes the next restart to go to the firmware user interface.|
|/e||Enables you to document the reason for the unexpected shutdown on the target computer.|
|/o||Goes to the Advanced boot options menu and restarts the device. This option must be used with the /r option.|
|/f||Forces running applications to close without warning users.
Caution: Using the /f option might result in loss of unsaved data.
||Specifies the target computer. Can't be used with the /l option.|
||Sets the time-out period before shutdown to xxx seconds. The valid range is 0-315360000 (10 years), with a default of 30. If the timeout period is greater than 0, the /f parameter is implied.|
||Lists the reason for the system restart or shutdown. The supported parameter values are:
||Enables you to comment in detail about the reason for the shutdown. You must first provide a reason by using the /d option and you must enclose your comments in quotation marks. You can use a maximum of 511 characters.|
|/?||Displays help at the command prompt, including a list of the major and minor reasons that are defined on your local computer.|
Users must be assigned the Shut down the system user right to shut down a local or remotely administered computer that is using the shutdown command.
Users must be members of the Administrators group to annotate an unexpected shutdown of a local or remotely administered computer. If the target computer is joined to a domain, members of the Domain Admins group might be able to perform this procedure. For more information, see:
If you want to shut down more than one computer at a time, you can call shutdown for each computer by using a script, or you can use shutdown /i to display the Remote Shutdown box.
If you specify major and minor reason codes, you must first define these reason codes on each computer where you plan to use the reasons. If the reason codes aren't defined on the target computer, Shutdown Event Tracker can't log the correct reason text.
Remember to indicate that a shutdown is planned by using the p parameter. Not using the p parameter, indicates that the shutdown was unplanned.
Using the p parameter, along the reason code for an unplanned shutdown, causes the shutdown to fail.
Not using the p parameter, and only providing the reason code for a planned shutdown, also causes the shutdown to fail.
To force apps to close and to restart the local computer after a one-minute delay, with the reason Application: Maintenance (Planned) and the comment "Reconfiguring myapp.exe", type:
shutdown /r /t 60 /c "Reconfiguring myapp.exe" /f /d p:4:1
To restart the remote computer myremoteserver with the same parameters as the previous example, type:
shutdown /r /m \\myremoteserver /t 60 /c "Reconfiguring myapp.exe" /f /d p:4:1
Submit and view feedback for