NetworkQoSPolicy DDF file
The following XML file contains the device description framework (DDF) for the NetworkQoSPolicy configuration service provider.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE MgmtTree PUBLIC " -//OMA//DTD-DM-DDF 1.2//EN" "http://www.openmobilealliance.org/tech/DTD/DM_DDF-V1_2.dtd"[<?oma-dm-ddf-ver supported-versions="1.2"?>]>
<MgmtTree xmlns:MSFT="http://schemas.microsoft.com/MobileDevice/DM">
<VerDTD>1.2</VerDTD>
<MSFT:Diagnostics>
</MSFT:Diagnostics>
<Node>
<NodeName>NetworkQoSPolicy</NodeName>
<Path>./Device/Vendor/MSFT</Path>
<DFProperties>
<AccessType>
<Get />
</AccessType>
<Description>The NetworkQoSPolicy configuration service provider creates network Quality of Service (QoS) policies. A QoS policy performs a set of actions on network traffic based on a set of matching conditions. This CSP was added in Windows 10, version 1703. This CSP is supported only in Microsoft Surface Hub prior to Window 10, version 2004.</Description>
<DFFormat>
<node />
</DFFormat>
<Occurrence>
<One />
</Occurrence>
<Scope>
<Permanent />
</Scope>
<DFType>
<MIME />
</DFType>
<MSFT:Applicability>
<MSFT:OsBuildVersion>10.0.19042</MSFT:OsBuildVersion>
<MSFT:CspVersion>1.0</MSFT:CspVersion>
<MSFT:EditionAllowList>0x4;0x1B;0x30;0x31;0x48;0x54;0x62;0x63;0x64;0x65;0x79;0x7A;0x7D;0x7E;0x81;0x82;0x88;0x8A;0x8B;0xA1;0xA2;0xA4;0xA5;0xAB;0xAC;0xAF;0xBC;0xBF;0xCA;0xCB;0xCD;0xCF;0xD2;</MSFT:EditionAllowList>
</MSFT:Applicability>
</DFProperties>
<Node>
<NodeName>Version</NodeName>
<DFProperties>
<AccessType>
<Get />
</AccessType>
<Description>Version information.</Description>
<DFFormat>
<int />
</DFFormat>
<Occurrence>
<One />
</Occurrence>
<Scope>
<Permanent />
</Scope>
<DFTitle>Version</DFTitle>
<DFType>
<MIME />
</DFType>
</DFProperties>
</Node>
<Node>
<NodeName>
</NodeName>
<DFProperties>
<AccessType>
<Add />
<Delete />
<Get />
<Replace />
</AccessType>
<Description>The value of this node should be a policy name.</Description>
<DFFormat>
<node />
</DFFormat>
<Occurrence>
<ZeroOrMore />
</Occurrence>
<Scope>
<Dynamic />
</Scope>
<DFTitle>Name</DFTitle>
<DFType>
<DDFName />
</DFType>
<MSFT:DynamicNodeNaming>
<MSFT:UniqueName>The value of this node should be a policy name.</MSFT:UniqueName>
</MSFT:DynamicNodeNaming>
</DFProperties>
<Node>
<NodeName>IPProtocolMatchCondition</NodeName>
<DFProperties>
<AccessType>
<Add />
<Delete />
<Get />
<Replace />
</AccessType>
<DefaultValue>0</DefaultValue>
<Description>Specifies the IP protocol used to match the network traffic. Valid values are 0: Both TCP and UDP (default), 1: TCP, 2: UDP.</Description>
<DFFormat>
<int />
</DFFormat>
<Occurrence>
<ZeroOrOne />
</Occurrence>
<Scope>
<Dynamic />
</Scope>
<DFTitle>IPProtocolMatchCondition</DFTitle>
<DFType>
<MIME />
</DFType>
</DFProperties>
</Node>
<Node>
<NodeName>AppPathNameMatchCondition</NodeName>
<DFProperties>
<AccessType>
<Add />
<Delete />
<Get />
<Replace />
</AccessType>
<Description>Specifies the name of an application to be used to match the network traffic, such as application.exe or %ProgramFiles%\application.exe.</Description>
<DFFormat>
<chr />
</DFFormat>
<Occurrence>
<ZeroOrOne />
</Occurrence>
<Scope>
<Dynamic />
</Scope>
<DFTitle>AppPathNameMatchCondition</DFTitle>
<DFType>
<MIME />
</DFType>
<MSFT:AllowedValues ValueType="None">
</MSFT:AllowedValues>
</DFProperties>
</Node>
<Node>
<NodeName>SourcePortMatchCondition</NodeName>
<DFProperties>
<AccessType>
<Add />
<Delete />
<Get />
<Replace />
</AccessType>
<Description>Specifies a single port or a range of ports to be used to match the network traffic. Valid values are [first port number]-[last port number] or [port number].</Description>
<DFFormat>
<chr />
</DFFormat>
<Occurrence>
<ZeroOrOne />
</Occurrence>
<Scope>
<Dynamic />
</Scope>
<DFTitle>SourcePortMatchCondition</DFTitle>
<DFType>
<MIME />
</DFType>
<MSFT:AllowedValues ValueType="None">
</MSFT:AllowedValues>
</DFProperties>
</Node>
<Node>
<NodeName>DestinationPortMatchCondition</NodeName>
<DFProperties>
<AccessType>
<Add />
<Delete />
<Get />
<Replace />
</AccessType>
<Description>Specifies a single port or a range of ports to be used to match the network traffic. Valid values are [first port number]-[last port number] or [port number].</Description>
<DFFormat>
<chr />
</DFFormat>
<Occurrence>
<ZeroOrOne />
</Occurrence>
<Scope>
<Dynamic />
</Scope>
<DFTitle>DestinationPortMatchCondition</DFTitle>
<DFType>
<MIME />
</DFType>
<MSFT:AllowedValues ValueType="None">
</MSFT:AllowedValues>
</DFProperties>
</Node>
<Node>
<NodeName>PriorityValue8021Action</NodeName>
<DFProperties>
<AccessType>
<Add />
<Delete />
<Get />
<Replace />
</AccessType>
<Description>The IEEE 802.1p value to apply to matching network traffice. Valid values are 0-7.</Description>
<DFFormat>
<int />
</DFFormat>
<Occurrence>
<ZeroOrOne />
</Occurrence>
<Scope>
<Dynamic />
</Scope>
<DFTitle>PriorityValue8021Action</DFTitle>
<DFType>
<MIME />
</DFType>
<MSFT:AllowedValues ValueType="Range">
<MSFT:Value>[0-7]</MSFT:Value>
</MSFT:AllowedValues>
</DFProperties>
</Node>
<Node>
<NodeName>DSCPAction</NodeName>
<DFProperties>
<AccessType>
<Add />
<Delete />
<Get />
<Replace />
</AccessType>
<Description>The differentiated services code point (DSCP) value to apply to matching network traffic. Valid values are 0-63.</Description>
<DFFormat>
<int />
</DFFormat>
<Occurrence>
<ZeroOrOne />
</Occurrence>
<Scope>
<Dynamic />
</Scope>
<DFTitle>DSCPAction</DFTitle>
<DFType>
<MIME />
</DFType>
<MSFT:AllowedValues ValueType="Range">
<MSFT:Value>[0-63]</MSFT:Value>
</MSFT:AllowedValues>
</DFProperties>
</Node>
</Node>
</Node>
</MgmtTree>
Related articles
Feedback
Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see: https://aka.ms/ContentUserFeedback.
Submit and view feedback for