Setting the BitLocker encryption algorithm for Autopilot devices
BitLocker automatically encrypts internal drives during the out-of-box experience (OOBE) for devices that support Modern Standby or meet the Hardware Security Testability Specification (HSTI). By default, BitLocker uses XTS-AES 128-bit used space only for automatic encryption.
With Windows Autopilot, BitLocker encryption settings can be configured to apply before automatic encryption starts. This configuration makes sure the default encryption algorithm or type isn't applied automatically. A device that receives these settings after encrypting automatically needs to be decrypted before changing the encryption algorithm.
Encryption algorithm
BitLocker uses the specified BitLocker encryption algorithm when BitLocker is first enabled. During Autopilot, BitLocker will be enabled after the device setup portion of the enrollment status page. The following encryption algorithms are available:
- AES-CBC 128-bit.
- AES-CBC 256-bit.
- XTS-AES 128-bit (default).
- XTS-AES 256-bit.
For more information about the recommended encryption algorithms to use, see BitLocker Configuration Service Provider (CSP).
To make sure the desired BitLocker encryption algorithm is set before automatic encryption occurs for Autopilot devices:
Configure the encryption method settings in the Endpoint Security disk encryption policy. The settings are available under Endpoint Security > Disk encryption > Create policy > Platform = Windows 10 and later, Profile type = BitLocker.
Assign the policy to the Autopilot device group. The encryption policy must be assigned to devices in the group, not users.
Enable the Autopilot enrollment status page for these devices. If this feature isn't enabled, the policy doesn't apply before encryption starts.
Full disk or used space-only encryption
There are two types of encryption, full disk or used space-only. Configuration of silent enablement and hardware support for modern standby automatically determines the type of encryption used. The type of encryption used can be enforced by configuring the SystemDrivesEncryptionType setting. Like the encryption algorithm, BitLocker uses the encryption type when BitLocker is first enabled. For more information on the expected encryption type behavior, see Manage BitLocker policy.
To enforce the type of drive encryption used:
Configure the Enforce drive encryption type on operating system drives setting within the settings catalog. This setting is available in the Administrative Templates > Windows Components > BitLocker Drive Encryption > Operating System Drives category from the settings picker.
Assign the policy to the Autopilot device group. The encryption policy must be assigned to devices in the group, not users.
Enable the Autopilot enrollment status page for these devices. If this feature isn't enabled, the policy doesn't apply before encryption starts.