Edit

VDS_VOLUME_FLAG enumeration (vds.h)

  • Article

[Beginning with Windows 8 and Windows Server 2012, the Virtual Disk Service COM interface is superseded by the Windows Storage Management API.]

Defines the set of valid flags for a volume object.

Syntax

typedef enum _VDS_VOLUME_FLAG {
  VDS_VF_SYSTEM_VOLUME = 0x1,
  VDS_VF_BOOT_VOLUME = 0x2,
  VDS_VF_ACTIVE = 0x4,
  VDS_VF_READONLY = 0x8,
  VDS_VF_HIDDEN = 0x10,
  VDS_VF_CAN_EXTEND = 0x20,
  VDS_VF_CAN_SHRINK = 0x40,
  VDS_VF_PAGEFILE = 0x80,
  VDS_VF_HIBERNATION = 0x100,
  VDS_VF_CRASHDUMP = 0x200,
  VDS_VF_INSTALLABLE = 0x400,
  VDS_VF_LBN_REMAP_ENABLED = 0x800,
  VDS_VF_FORMATTING = 0x1000,
  VDS_VF_NOT_FORMATTABLE = 0x2000,
  VDS_VF_NTFS_NOT_SUPPORTED = 0x4000,
  VDS_VF_FAT32_NOT_SUPPORTED = 0x8000,
  VDS_VF_FAT_NOT_SUPPORTED = 0x10000,
  VDS_VF_NO_DEFAULT_DRIVE_LETTER = 0x20000,
  VDS_VF_PERMANENTLY_DISMOUNTED = 0x40000,
  VDS_VF_PERMANENT_DISMOUNT_SUPPORTED = 0x80000,
  VDS_VF_SHADOW_COPY = 0x100000,
  VDS_VF_FVE_ENABLED = 0x200000,
  VDS_VF_DIRTY = 0x400000,
  VDS_VF_REFS_NOT_SUPPORTED = 0x800000,
  VDS_VF_BACKS_BOOT_VOLUME = 0x1000000,
  VDS_VF_BACKED_BY_WIM_IMAGE = 0x2000000
} VDS_VOLUME_FLAG;

Constants

 
VDS_VF_SYSTEM_VOLUME
Value: 0x1
The volume is a system volume.
VDS_VF_BOOT_VOLUME
Value: 0x2
The volume is the boot volume.
VDS_VF_ACTIVE
Value: 0x4
The volume is active. That is, the bootIndicator value of the
underlying partition is set to true.
VDS_VF_READONLY
Value: 0x8
The volume has a drive letter and a Mount Manager–assigned volume GUID name, and is enumerated by the FindFirstVolume and FindNextVolume functions. However, the volume is read-only. This flag does not apply to CD-ROM or DVD devices.
VDS_VF_HIDDEN
Value: 0x10
The volume does not have a drive letter and a Mount Manager–assigned volume GUID name. The volume is not enumerated by the FindFirstVolume and FindNextVolume functions. The volume can be opened by using its device name, and the opened volume can be read from or written to. An example of a volume device name is \?\GLOBALROOT\Device\HarddiskVolumeX. This flag does not apply to CD-ROM or DVD devices.
VDS_VF_CAN_EXTEND
Value: 0x20
The volume size can be extended.
VDS_VF_CAN_SHRINK
Value: 0x40
The volume size can be reduced.
VDS_VF_PAGEFILE
Value: 0x80
The volume contains a pagefile.
VDS_VF_HIBERNATION
Value: 0x100
The volume contains a hibernation file.
VDS_VF_CRASHDUMP
Value: 0x200
The volume contains the crash dump file.
VDS_VF_INSTALLABLE
Value: 0x400
VDS creates a hard partition under a dynamic volume that callers can use to install an operating system. Clearing this flag causes the partition to be deleted. This flag can be set or cleared only for dynamic disks; it is always set for basic disks. This flag does not apply to CD-ROM or DVD devices.
VDS_VF_LBN_REMAP_ENABLED
Value: 0x800
VDS can change the position of the volume on the disk dynamically. This flag is not valid for basic
or dynamic volumes and is supported only by some third-party volume managers.
VDS_VF_FORMATTING
Value: 0x1000
The volume is being formatted.
VDS_VF_NOT_FORMATTABLE
Value: 0x2000
The volume cannot be formatted. This flag applies to small portable memory devices, removable
devices, CDROM devices, and DVD devices. For CD and DVD devices, this is always set when there is media in the
drive, and is not set if there is no media in the drive.
VDS_VF_NTFS_NOT_SUPPORTED
Value: 0x4000
The volume does not support NTFS, but can support other file systems. This flag applies to small
portable memory devices, removable devices, CDROM devices, and DVD devices.
VDS_VF_FAT32_NOT_SUPPORTED
Value: 0x8000
The volume does not support FAT32. This flag applies to small portable memory devices, removable
devices, CDROM devices, and DVD devices.
VDS_VF_FAT_NOT_SUPPORTED
Value: 0x10000
The volume does not support FAT. This flag applies to small portable memory devices, removable
devices, CDROM devices, and DVD devices.
VDS_VF_NO_DEFAULT_DRIVE_LETTER
Value: 0x20000
The operating system does not assign a drive letter automatically the next time the volume is added to the computer.
If cleared, the operating system assigns a drive letter to the volume under some conditions. For basic GPT
volumes, assigning or removing a drive letter will toggle this flag. This flag does not apply to CD-ROM or DVD devices.

Windows Server 2003:  On dynamic volumes, this flag is always set and cannot be cleared. On basic volumes, it is cleared by default and can be set or cleared only by calling the IVdsVolume::SetFlags or IVdsVolume::ClearFlags method.
VDS_VF_PERMANENTLY_DISMOUNTED
Value: 0x40000
The volume is offline. Volume open will succeed on an offline volume. However, I/O against an offline volume will fail. Assigning an access path, such as a drive letter, to an offline volume causes it to become online. To set this flag, call the IVdsVolumeMF::Dismount
method, setting the bForce and bPermanent parameters to
TRUE. This flag does not apply to CD-ROM or DVD devices.

Windows Server 2003:  Offlining dynamic volumes is not supported.

When a volume is offline, this flag is set in the ulFlags member of the VDS_VOLUME_PROP structure, and the VDS_VS_OFFLINE flag is also set in the status member of the VDS_VOLUME_PROP or VDS_VOLUME_PROP2 structure.Windows Server 2008, Windows Vista and Windows Server 2003:  The VDS_VS_OFFLINE flag is not supported.
VDS_VF_PERMANENT_DISMOUNT_SUPPORTED
Value: 0x80000
The volume can be taken offline.
VDS_VF_SHADOW_COPY
Value: 0x100000
The volume is a shadow copy of another volume. This flag is set when the shadow copy is created. It is
cleared when the shadow copy is broken from the original volume. The VDS_VF_SHADOW_COPY
flag is an indication for file system filter driver-based software (such as
antivirus programs) to avoid attaching to the
volume. The attribute can be used by applications to differentiate shadow copy volumes from production volumes. Applications that
perform a Fast Recovery where a shadow copy LUN is made into a non-shadow copy by clearing the read-only and hidden
bit will need to clear this bit as well. This flag does not apply to CD-ROM or DVD devices.


Windows Server 2003:  This flag is not supported before Windows Server 2003 with SP1.
VDS_VF_FVE_ENABLED
Value: 0x200000
The volume is protected by BitLocker full-volume encryption. This flag does not apply to CD-ROM or DVD devices.

Windows Server 2003:  This flag is not supported.
VDS_VF_DIRTY
Value: 0x400000
The volume's dirty bit is set.

Windows Server 2003:  This flag is not supported.
VDS_VF_REFS_NOT_SUPPORTED
Value: 0x800000
VDS_VF_BACKS_BOOT_VOLUME
Value: 0x1000000
VDS_VF_BACKED_BY_WIM_IMAGE
Value: 0x2000000

Remarks

On an MBR basic disk, volume flags can be set only for the entire disk, not for individual volumes.

If the VDS_VF_NO_DEFAULT_DRIVE_LETTER flag is set on an MBR disk, any existing drive letters are preserved, but no new drive letters will be assigned to volumes on the disk.

This enumeration provides values for the ulFlags member of the VDS_VOLUME_PROP structure and the ulFlags parameter of the IVdsVolume::SetFlags and IVdsVolume::ClearFlags methods.

The following table compares the behavior of the VDS_VF_NO_DEFAULT_DRIVE_LETTER flag on MBR basic disks, GPT basic disks, and dynamic disks.

Feature MBR basic disks GPT basic disks MBR or GPT dynamic disks
The VDS_VF_NO_DEFAULT_DRIVE_LETTER flag is cleared by default. However, this flag can be set by calling IVdsVolume::SetFlags. Yes. Yes. Yes.Windows Server 2003:  This flag is always set for dynamic disks and cannot be cleared.
Assigning or removing a drive letter toggles the VDS_VF_NO_DEFAULT_DRIVE_LETTER flag setting. No, because this flag is set or cleared for the entire disk. Yes, because this flag is set or cleared for individual volumes. Yes.Windows Server 2003:  This flag is always set for dynamic disks and cannot be cleared.
 

To create a boot volume on a dynamic disk, you must set the VDS_VF_INSTALLABLE flag for the volume and then format the volume by calling the IVdsVolumeMF::Format method.

Note  Additional constants might be added to the VDS_VOLUME_FLAG enumeration in future Windows versions. For this reason, your application must be designed to gracefully handle an unrecognized VDS_VOLUME_FLAG enumeration constant.
 

Requirements

Requirement Value
Minimum supported client Windows Vista [desktop apps only]
Minimum supported server Windows Server 2003 [desktop apps only]
Header vds.h

See also

IVdsVolume::ClearFlags

IVdsVolume::SetFlags

IVdsVolumeMF::Dismount

VDS Enumerations

VDS_PARTITION_INFO_MBR

VDS_SAN_POLICY

VDS_VOLUME_PROP