DDVIDEOPORTDATA structure (dxmini.h)

The DDVIDEOPORTDATA structure is used by DirectDraw to represent a video port extensions (VPE) object to the kernel-mode video miniport driver.

Syntax

typedef struct DDVIDEOPORTDATA {
  DWORD dwVideoPortId;
  DWORD dwVPFlags;
  DWORD dwOriginOffset;
  DWORD dwHeight;
  DWORD dwVBIHeight;
  ULONG dwDriverReserved1;
  ULONG dwDriverReserved2;
  ULONG dwDriverReserved3;
} DDVIDEOPORTDATA, *LPDDVIDEOPORTDATA;

Members

dwVideoPortId

Specifies the ID of this hardware video port, an integer in the range (0 - (maximum number of hardware video ports - 1)).

dwVPFlags

Indicates a set of flags that specify the current user mode DDVP_Xxx flags set by DdVideoPortUpdate. This member can be a bitwise OR of any of the following flags:

Flag	Meaning
DDVP_AUTOFLIP	Perform automatic flipping. Autoflipping is performed between the overlay surface that was attached to the hardware video port using the application's AttachSurface method, and the overlay surfaces that are attached to the surface using the application's AttachSurface method. The flip order is the order in which the overlay surfaces were attached.
DDVP_CONVERT	Perform the conversion using the target surface format.
DDVP_CROP	Perform cropping using the specified rectangle.
DDVP_HARDWAREDEINTERLACE	The hardware video port should use the deinterlacing hardware.
DDVP_IGNOREVBIXCROP	The video data should ignore the left and right cropping coordinates when cropping the vertical blanking interval (VBI) data.
DDVP_INTERLEAVE	Interlaced fields should be interleaved in memory.
DDVP_MIRRORLEFTRIGHT	The data should be mirrored left to right as it is written into the frame buffer.
DDVP_MIRRORUPDOWN	The data should be mirrored top to bottom as it is written into the frame buffer.
DDVP_OVERRIDEBOBWEAVE	These bob and weave decisions should not be overridden by other interfaces. If this flag is set, DirectDraw does not allow a kernel-mode driver to use the kernel-mode video transport functionality to switch the hardware between bob and weave modes.
DDVP_PRESCALE	Perform prescaling/zooming based on the prescale parameters.
DDVP_SKIPEVENFIELDS	Ignore input of even fields.
DDVP_SKIPODDFIELDS	Ignore input of odd fields.
DDVP_SYNCMASTER	Drive the graphics V-syncs using the hardware video port V-syncs.
DDVP_VBICONVERT	The lpddpfVBIOutputFormat member contains data that should be used to convert the data within the vertical blanking interval.
DDVP_VBINOINTERLEAVE	Interleaving can be disabled for data within the vertical blanking interval.
DDVP_VBINOSCALE	Data within the vertical blanking interval should not be scaled.

dwOriginOffset

Specifies the byte offset of the VPE object relative to the start of the surface. This value is used only by the miniport driver.

dwHeight

Specifies the height in pixels of the VPE object data. This value is used only by the miniport driver.

dwVBIHeight

Specifies the height in scan lines of the VBI data. This value is used only by the miniport driver.

dwDriverReserved1

Reserved for use by the miniport driver.

dwDriverReserved2

Reserved for use by the miniport driver.

dwDriverReserved3

Reserved for use by the miniport driver.

Requirements

Requirement	Value
Header	dxmini.h (include Dxmini.h)

See also

DdVideoPortUpdate