Edit

Share via

IDiscRecorder2Ex::SendCommandNoData method (imapi2.h)

  • Article

Sends a MMC command to the recording device. Use this function when no data buffer is sent to nor received from the device.

Syntax

HRESULT SendCommandNoData(
  [in]  BYTE      *Cdb,
  [in]  ULONG     CdbSize,
  [out] BYTE [18] SenseBuffer,
  [in]  ULONG     Timeout
);

Parameters

[in] Cdb

Command packet to send to the device.

[in] CdbSize

Size, in bytes, of the command packet to send. Must be between 6 and 16 bytes.

[out] SenseBuffer

Sense data returned by the recording device.

[in] Timeout

Time limit, in seconds, allowed for the send command to receive a result.

Return value

S_OK or one of the following values can be returned on success, but other success codes may be returned as a result of implementation:

Return code Description
S_IMAPI_COMMAND_HAS_SENSE_DATA
 The device fails the command, but returns sense data.

Value: 0x00AA0200
 

The following error codes are commonly returned on operation failure, but do not represent the only possible error values:

Return code Description
E_POINTER
 Pointer is not valid.

Value: 0x80004003
E_FAIL
 Unspecified failure.

Value: 0x80004005
E_IMAPI_RECORDER_GET_CONFIGURATION_NOT_SUPPORTED
 The drive does not support the GET CONFIGURATION command.

Value: 0xC0AA020C
E_IMAPI_RECORDER_NO_SUCH_FEATURE
 The feature page requested is not supported by the device.

Value: 0xC0AA020A
E_OUTOFMEMORY
 Failed to allocate the required memory.

Value: 0x8007000E
E_IMAPI_RECORDER_FEATURE_IS_NOT_CURRENT
 The feature page requested is supported, but is not marked as current.

Value: 0xC0AA020B
E_IMAPI_RECORDER_COMMAND_TIMEOUT
 The device failed to accept the command within the timeout period. This may be caused by the device having entered an inconsistent state, or the timeout value for the command may need to be increased.

Value: 0xC0AA020D
E_IMAPI_RECORDER_INVALID_RESPONSE_FROM_DEVICE
 The device reported unexpected or invalid data for a command.

Value: 0xC0AA02FF
E_IMAPI_RECORDER_MEDIA_UPSIDE_DOWN
 The media is inserted upside down.

Value: 0xC0AA0204
E_IMAPI_RECORDER_MEDIA_BECOMING_READY
 The drive reported that it is in the process of becoming ready. Please try the request again later.

Value: 0xC0AA0205
E_IMAPI_RECORDER_MEDIA_NO_MEDIA
 There is no media in the device.

Value: 0xC0AA0202
E_IMAPI_RECORDER_MEDIA_FORMAT_IN_PROGRESS
 The media is currently being formatted. Please wait for the format to complete before attempting to use the media.

Value: 0xC0AA0206
E_IMAPI_RECORDER_MEDIA_BUSY
 The drive reported that it is performing a long-running operation, such as finishing a write. The drive may be unusable for a long period of time.

Value: 0xC0AA0207
E_IMAPI_LOSS_OF_STREAMING
 The write failed because the drive did not receive data quickly enough to continue writing. Moving the source data to the local computer, reducing the write speed, or enabling a "buffer underrun free" setting may resolve this issue.

Value: 0xC0AA0300
E_IMAPI_RECORDER_MEDIA_INCOMPATIBLE
 The media is not compatible or of unknown physical format.

Value: 0xC0AA0203
E_IMAPI_RECORDER_DVD_STRUCTURE_NOT_PRESENT
 The DVD structure is not present. This may be caused by incompatible drive/medium used.

Value: 0xC0AA020E
E_IMAPI_RECORDER_NO_SUCH_MODE_PAGE
 The device reported that the requested mode page (and type) is not present.

Value: 0xC0AA0201
E_IMAPI_RECORDER_INVALID_MODE_PARAMETERS
 The drive reported that the combination of parameters provided in the mode page for a MODE SELECT command were not supported.

Value: 0xC0AA0208
E_IMAPI_RECORDER_MEDIA_WRITE_PROTECTED
 The drive reported that the media is write protected.

Value: 0xC0AA0209
E_IMAPI_RECORDER_MEDIA_SPEED_MISMATCH
 The media's speed is incompatible with the device. This may be caused by using higher or lower speed media than the range of speeds supported by the device.

Value: 0xC0AA020F
HRESULT_FROM_WIN32(ERROR_INVALID_HANDLE)
 The specified handle is invalid.

Value: 6
HRESULT_FROM_WIN32(ERROR_DEV_NOT_EXIST)
 The specified network resource or device is no longer available.

Value: 55
E_IMAPI_RECORDER_LOCKED
 The device associated with this recorder during the last operation has been exclusively locked, causing this operation to failed.

Value: 0xC0AA0210

Remarks

For details of the contents of the command packet and sense data, see the latest revision of the MMC specification at ftp://ftp.t10.org/t10/drafts/mmc5.

Client-defined commands (CDBs) used with this method must be between 6 and 16 bytes in length. In addition, the size of each command must match the size defined by the operation code as defined in the following table.

CDB operation code range CDB group Required CDB size
0x00 — 0x1F 0 6 bytes
0x20 — 0x3F 1 10 bytes
0x40 — 0x5F 2 10 bytes
0x60 — 0x7F 3 Will enforce standard-specified size requirements for this opcode range in the future.
0x80 — 0x9F 4 16 bytes
0xA0 — 0xBF 5 12 bytes
0xC0 — 0xDF 6 Vendor Unique - Any size allowed
0xE0 — 0xFF 7 Vendor Unique - Any size allowed
 

Some very early devices used vendor-unique opcodes and therefore some opcodes cannot be validated in this manner. The following opcodes are still valid and only verify that the size is between 6 and 16 bytes:

0x02, 0x05, 0x06, 0x09, 0x0C, 0x0D, 0x0E, 0x0F, 0x10, 0x13, 0x14, 0x19, 0x20, 0x21, 0x22, 0x23, 0x24, 0x26, 0x27, 0x29, 0x2C, 0x2D

Requirements

Requirement Value
Minimum supported client Windows Vista, Windows XP with SP2 [desktop apps only]
Minimum supported server Windows Server 2003 [desktop apps only]
Target Platform Windows
Header imapi2.h

See also

IDiscRecorder2Ex

IDiscRecorder2Ex::SendCommandGetDataFromDevice

IDiscRecorder2Ex::SendCommandSendDataToDevice