NCB structure (nb30.h)
[Netbios is not supported on Windows Vista, Windows Server 2008, and subsequent versions of the operating system]
The NCB structure represents a network control block. It contains information about the command to perform, an optional post routine, an optional event handle, and a pointer to a buffer that is used for messages or other data. A pointer to this structure is passed to the Netbios function.
Syntax
typedef struct _NCB {
UCHAR ncb_command;
UCHAR ncb_retcode;
UCHAR ncb_lsn;
UCHAR ncb_num;
PUCHAR ncb_buffer;
WORD ncb_length;
UCHAR ncb_callname[NCBNAMSZ];
UCHAR ncb_name[NCBNAMSZ];
UCHAR ncb_rto;
UCHAR ncb_sto;
void()(_NCB *) * ncb_post;
UCHAR ncb_lana_num;
UCHAR ncb_cmd_cplt;
#if ...
UCHAR ncb_reserve[18];
#else
UCHAR ncb_reserve[10];
#endif
HANDLE ncb_event;
} NCB, *PNCB;
Members
ncb_command
Specifies the command code and a flag that indicates whether the NCB structure is processed asynchronously. The most significant bit contains the flag. If the ASYNCH constant is combined with a command code (by using the OR operator), the NCB structure is processed asynchronously. The following command codes are supported.
| Code | Meaning |
|---|---|
| NCBACTION |
Windows Server 2003, Windows XP, Windows 2000, and Windows NT: Enables extensions to the transport interface. NCBACTION is mapped to TdiAction. When this code is specified, the ncb_buffer member points to a buffer to be filled with an ACTION_HEADER structure, which is optionally followed by data. NCBACTION commands cannot be canceled by using NCBCANCEL. NCBACTION is not a standard NetBIOS 3.0 command. |
| NCBADDGRNAME | Adds a group name to the local name table. This name cannot be used by another process on the network as a unique name, but it can be added by anyone as a group name. |
| NCBADDNAME | Adds a unique name to the local name table. The TDI driver ensures that the name is unique across the network. |
| NCBASTAT | Retrieves the status of either a local or remote adapter. When this code is specified, the ncb_buffer member points to a buffer to be filled with an ADAPTER_STATUS structure, followed by an array of NAME_BUFFER structures. |
| NCBCALL | Opens a session with another name. |
| NCBCANCEL | Cancels a previous pending command. |
| NCBCHAINSEND | Sends the contents of two data buffers to the specified session partner. |
| NCBCHAINSENDNA | Sends the contents of two data buffers to the specified session partner and does not wait for acknowledgment. |
| NCBDELNAME | Deletes a name from the local name table. |
| NCBDGRECV | Receives a datagram from any name. |
| NCBDGRECVBC | Receives a broadcast datagram from any name. |
| NCBDGSEND | Sends datagram to a specified name. |
| NCBDGSENDBC | Sends a broadcast datagram to every host on the local area network (LAN). |
| NCBENUM |
Windows Server 2003, Windows XP, Windows 2000, and Windows NT: Enumerates LAN adapter (LANA) numbers. When this code is specified, the ncb_buffer member points to a buffer to be filled with a LANA_ENUM structure. NCBENUM is not a standard NetBIOS 3.0 command. |
| NCBFINDNAME | Determines the location of a name on the network. When this code is specified, the ncb_buffer member points to a buffer to be filled with a FIND_NAME_HEADER structure followed by one or more FIND_NAME_BUFFER structures. |
| NCBHANGUP | Closes a specified session. |
| NCBLANSTALERT |
Windows Server 2003, Windows XP, Windows 2000, and Windows NT: Notifies the user of LAN failures that last for more than one minute. |
| NCBLISTEN | Enables a session to be opened with another name (local or remote). |
| NCBRECV | Receives data from the specified session partner. |
| NCBRECVANY | Receives data from any session corresponding to a specified name. |
| NCBRESET |
Resets a LAN adapter. An adapter must be reset before it can accept any other NCB command that specifies the same number in the ncb_lana_num member.
Use the following values to specify how resources are to be freed:
|
| NCBSEND | Sends data to the specified session partner. |
| NCBSENDNA | Sends data to specified session partner and does not wait for acknowledgment. |
| NCBSSTAT | Retrieves the status of the session. When this value is specified, the ncb_buffer member points to a buffer to be filled with a SESSION_HEADER structure, followed by one or more SESSION_BUFFER structures. |
| NCBTRACE |
Activates or deactivates NCB tracing.
This command is not supported. |
| NCBUNLINK |
Unlinks the adapter.
This command is provided for compatibility with earlier versions of NetBIOS. It has no effect in Windows. |
ncb_retcode
Specifies the return code. This value is set to NRC_PENDING while an asynchronous operation is in progress. The system returns one of the following values:
| Value | Meaning |
|---|---|
| NRC_GOODRET | The operation succeeded. |
| NRC_BUFLEN | An illegal buffer length was supplied. |
| NRC_ILLCMD | An illegal command was supplied. |
| NRC_CMDTMO | The command was timed out. |
| NRC_INCOMP | The message was incomplete. The application is to issue another command. |
| NRC_BADDR | The buffer address was illegal. |
| NRC_SNUMOUT | The session number was out of range. |
| NRC_NORES | No resource was available. |
| NRC_SCLOSED | The session was closed. |
| NRC_CMDCAN | The command was canceled. |
| NRC_DUPNAME | A duplicate name existed in the local name table. |
| NRC_NAMTFUL | The name table was full. |
| NRC_ACTSES | The command finished; the name has active sessions and is no longer registered. |
| NRC_LOCTFUL | The local session table was full. |
| NRC_REMTFUL | The remote session table was full. The request to open a session was rejected. |
| NRC_ILLNN | An illegal name number was specified. |
| NRC_NOCALL | The system did not find the name that was called. |
| NRC_NOWILD | Wildcards are not permitted in the ncb_name member. |
| NRC_INUSE | The name was already in use on the remote adapter. |
| NRC_NAMERR | The name was deleted. |
| NRC_SABORT | The session ended abnormally. |
| NRC_NAMCONF | A name conflict was detected. |
| NRC_IFBUSY | The interface was busy. |
| NRC_TOOMANY | Too many commands were outstanding; the application can retry the command later. |
| NRC_BRIDGE | The ncb_lana_num member did not specify a valid network number. |
| NRC_CANOCCR | The command finished while a cancel operation was occurring. |
| NRC_CANCEL | The NCBCANCEL command was not valid; the command was not canceled. |
| NRC_DUPENV | The name was defined by another local process. |
| NRC_ENVNOTDEF | The environment was not defined. A reset command must be issued. |
| NRC_OSRESNOTAV | Operating system resources were exhausted. The application can retry the command later. |
| NRC_MAXAPPS | The maximum number of applications was exceeded. |
| NRC_NOSAPS | No service access points (SAPs) were available for NetBIOS. |
| NRC_NORESOURCES | The requested resources were not available. |
| NRC_INVADDRESS | The NCB address was not valid. |
| NRC_INVDDID |
The NCB DDID was invalid.
This return code is not part of the IBM NetBIOS 3.0 specification and is not returned in the NCB structure. Instead, it is returned by the Netbios function. |
| NRC_LOCKFAIL | The attempt to lock the user area failed. |
| NRC_OPENERR | An error occurred during an open operation being performed by the device driver. This error code is not part of the NetBIOS 3.0 specification. |
| NRC_SYSTEM | A system error occurred. |
| NRC_PENDING | An asynchronous operation is not yet finished. |
ncb_lsn
Identifies the local session number. This number uniquely identifies a session within an environment. This number is returned by the Netbios function after a successful NCBCALL command.
ncb_num
Specifies the number for the local network name. This number is returned by Netbios after a successful NCBADDNAME or NCBADDGRNAME command. This number, not the name, must be used with all datagram commands and for NCBRECVANY commands.
The number for NAME_NUMBER_1 is always 0x01. The Netbios function assigns values in the range 0x02 to 0xFE for the remaining names.
ncb_buffer
Pointer to the message buffer. The buffer must have write access. Its uses are as follows:
| Command | Purpose |
|---|---|
| NCBSEND | Contains the message to be sent. |
| NCBRECV | Receives the message. |
| NCBSSTAT | Receives the requested status information. |
ncb_length
Specifies the size, in bytes, of the message buffer. For receive commands, this member is set by the Netbios function to indicate the number of bytes received.
If the buffer length is incorrect, the Netbios function returns the NRC_BUFLEN error code.
ncb_callname[NCBNAMSZ]
Specifies the name of the remote application. Trailing-space characters should be supplied to make the length of the string equal to NCBNAMSZ.
ncb_name[NCBNAMSZ]
Specifies the name by which the application is known. Trailing-space characters should be supplied to make the length of the string equal to NCBNAMSZ.
ncb_rto
Specifies the time-out period for receive operations, in 500-millisecond units, for the session. A value of zero implies no time-out. Specify with the NCBCALL or NCBLISTEN command. Affects subsequent NCBRECV commands.
ncb_sto
Specifies the time-out period for send operations, in 500-millisecond units, for the session. A value of zero implies no time-out. Specify with the NCBCALL or NCBLISTEN command. Affects subsequent NCBSEND and NCBCHAINSEND commands.
ncb_post
Specifies the address of the post routine to call when the asynchronous command is completed. The post routine is defined as:
NCB_POST PostRoutine( PNCB pncb );
where the pncb parameter is a pointer to the completed NCB structure.
ncb_lana_num
Specifies the LAN adapter number. This zero-based number corresponds to a particular transport provider using a particular LAN adapter board.
ncb_cmd_cplt
Specifies the command complete flag. This value is the same as the ncb_retcode member.
ncb_reserve[18]
Reserved; must be zero.
The length, X, of the ncb_reserve array is dependent upon the system architecture. For 64-bit systems, the array contains 18 elements. Otherwise, the array contains 10 elements.
ncb_reserve[10]
Reserved; must be zero.
The length, X, of the ncb_reserve array is dependent upon the system architecture. For 64-bit systems, the array contains 18 elements. Otherwise, the array contains 10 elements.
ncb_event
Specifies a handle to an event object that is set to the nonsignaled state when an asynchronous command is accepted, and it is set to the signaled state when the asynchronous command is completed. The event is signaled if the Netbios function returns a nonzero value. Only manual reset events should be used for synchronization. A specified event should not be associated with more than one active asynchronous command.
The ncb_event member must be zero if the ncb_command member does not have the ASYNCH flag set or if ncb_post is nonzero. Otherwise, Netbios returns the NRC_ILLCMD error code.
Remarks
Using ncb_event to issue asynchronous requests requires fewer system resources than using ncb_post. In addition, when ncb_event is nonzero, the pending request is canceled if the thread terminates before the request is processed. This is not true for asynchronous requests sent using ncb_post.
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | Windows 2000 Professional [desktop apps only] |
| Minimum supported server | Windows 2000 Server [desktop apps only] |
| Header | nb30.h |
See also
Feedback
Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see: https://aka.ms/ContentUserFeedback.
Submit and view feedback for