SetPerTcp6ConnectionEStats function (iphlpapi.h)
The SetPerTcp6ConnectionEStats function sets a value in the read/write information for an IPv6 TCP connection. This function is used to enable or disable extended statistics for an IPv6 TCP connection.
Syntax
IPHLPAPI_DLL_LINKAGE ULONG SetPerTcp6ConnectionEStats(
PMIB_TCP6ROW Row,
TCP_ESTATS_TYPE EstatsType,
PUCHAR Rw,
ULONG RwVersion,
ULONG RwSize,
ULONG Offset
);
Parameters
Row
A pointer to a MIB_TCP6ROW structure for an IPv6 TCP connection.
EstatsType
The type of extended statistics for TCP to set. This parameter determines the data and format of information that is expected in the Rw parameter.
This parameter can be one of the values from the TCP_ESTATS_TYPE enumeration type defined in the Tcpestats.h header file.
| Value | Meaning |
|---|---|
|
This value specifies extended data transfer information for a TCP connection.
When this value is specified, the buffer pointed to by the Rw parameter should point to a TCP_ESTATS_DATA_RW_v0 structure. |
|
This value specifies sender congestion for a TCP connection.
When this value is specified, the buffer pointed to by the Rw parameter should point to a TCP_ESTATS_SND_CONG_RW_v0 structure. |
|
This value specifies extended path measurement information for a TCP connection.
When this value is specified, the buffer pointed to by the Rw parameter should point to a TCP_ESTATS_PATH_RW_v0 structure. |
|
This value specifies extended output-queuing information for a TCP connection.
When this value is specified, the buffer pointed to by the Rw parameter should point to a TCP_ESTATS_SEND_BUFF_RW_v0 structure. |
|
This value specifies extended local-receiver information for a TCP connection.
When this value is specified, the buffer pointed to by the Rw parameter should point to a TCP_ESTATS_REC_RW_v0 structure. |
|
This value specifies extended remote-receiver information for a TCP connection.
When this value is specified, the buffer pointed to by the Rw parameter should point to a TCP_ESTATS_OBS_REC_RW_v0 structure. |
|
This value specifies bandwidth estimation statistics for a TCP connection on bandwidth.
When this value is specified, the buffer pointed to by the Rw parameter should point to a TCP_ESTATS_BANDWIDTH_RW_v0 structure. |
|
This value specifies fine-grained round-trip time (RTT) estimation statistics for a TCP connection.
When this value is specified, the buffer pointed to by the Rw parameter should point to a TCP_ESTATS_FINE_RTT_RW_v0 structure. |
Rw
A pointer to a buffer that contains the read/write information to set. The buffer should contain a value from the TCP_BOOLEAN_OPTIONAL enumeration for each structure member that specifies how each member should be updated.
RwVersion
The version of the read/write information to be set. This parameter should be set to zero for Windows Vista, Windows Server 2008, and Windows 7.
RwSize
The size, in bytes, of the buffer pointed to by the Rw parameter.
Offset
The offset, in bytes, to the member in the structure pointed to by the Rw parameter to be set. This parameter is currently unused and must be set to zero.
Return value
If the function succeeds, the return value is NO_ERROR.
If the function fails, the return value is one of the following error codes.
| Return code | Description |
|---|---|
|
Access is denied. This error is returned under several conditions that include the following: the user lacks the required administrative privileges on the local computer or the application is not running in an enhanced shell as the built-in Administrator (RunAs administrator). |
|
The parameter is incorrect. This error is returned if the Row parameter is a NULL pointer. |
|
The supplied user buffer is not valid for the requested operation. This error is returned if the Row parameter is a NULL pointer and the RwSize parameter is nonzero. |
|
This requested entry was not found. This error is returned if the TCP connection specified in the Row parameter could not be found. |
|
The request is not supported. This error is returned if the RwVersion or the Offset parameter is not set to 0. |
|
Use FormatMessage to obtain the message string for the returned error. |
Remarks
The SetPerTcp6ConnectionEStats function is defined on Windows Vista and later.
The SetPerTcp6ConnectionEStats function is used to enable or disable extended statistics for the IPv6 TCP connection passed in the Row parameter. Extended statistics on a TCP connection are disabled by default.
The SetPerTcp6ConnectionEStats function is used to set the value of a member in the read/write information for extended statistics for an IPv6 TCP connection. The type and format of the structure to be set is specified by the EstatsType parameter. The Rw parameter contains a pointer to the structure being passed. The member to set in this structure is specified by the Offset parameter. All members in the structure pointed to by Rw parameter must be specified.
The only version of TCP connection statistics currently supported is version zero. So the RwVersion parameter passed to SetPerTcp6ConnectionEStats should be set to 0.
The structure pointed to by the Rw parameter passed this function depends on the enumeration value passed in the EstatsType parameter. The following table below indicates the structure type that should be passed in the Rw parameter for each possible EstatsType parameter type.
| EstatsType | Structure pointed to by Rw |
|---|---|
| TcpConnectionEstatsData | TCP_ESTATS_DATA_RW_v0 |
| TcpConnectionEstatsSndCong | TCP_ESTATS_SND_CONG_RW_v0 |
| TcpConnectionEstatsPath | TCP_ESTATS_PATH_RW_v0 |
| TcpConnectionEstatsSendBuff | TCP_ESTATS_SEND_BUFF_RW_v0 |
| TcpConnectionEstatsRec | TCP_ESTATS_REC_RW_v0 |
| TcpConnectionEstatsObsRec | TCP_ESTATS_OBS_REC_RW_v0 |
| TcpConnectionEstatsBandwidth | TCP_ESTATS_BANDWIDTH_RW_v0 |
| TcpConnectionEstatsFineRtt | TCP_ESTATS_FINE_RTT_RW_v0 |
The Offset parameter is currently unused. The possible structures pointed to by the Rw parameter all have a single member except for the TCP_ESTATS_BANDWIDTH_RW_v0 structure. When the EstatsType parameter is set to TcpConnectionEstatsBandwidth, the TCP_ESTATS_BANDWIDTH_RW_v0 structure pointed to by the Rw parameter must have both structure members set to the preferred values in a single call to the SetPerTcp6ConnectionEStats function.
If the RwSize parameter is set to 0, the SetPerTcp6ConnectionEStats function returns NO_ERROR and makes no changes to the extended statistics status.
The GetTcp6Table function is used to retrieve the IPv6 TCP connection table on the local computer. This function returns a MIB_TCP6TABLE structure that contain an array of MIB_TCP6ROW entries. The Row parameter passed to the SetPerTcp6ConnectionEStats function must be an entry for an existing IPv6 TCP connection.
Once extended statistics are enabled on a TCP connection for IPv6, an application calls the GetPerTcp6ConnectionEStats function to retrieve extended statistics on the TCP connection.
The GetPerTcp6ConnectionEStats function is designed to use TCP to diagnose performance problems in both the network and the application. If a network based application is performing poorly, TCP can determine if the bottleneck is in the sender, the receiver or the network itself. If the bottleneck is in the network, TCP can provide specific information about its nature.
For information on extended TCP statistics on an IPv4 connection, see the GetPerTcpConnectionEStats and SetPerTcpConnectionEStats functions.
The SetPerTcp6ConnectionEStats function can only be called by a user logged on as a member of the Administrators group. If SetPerTcp6ConnectionEStats is called by a user that is not a member of the Administrators group, the function call will fail and ERROR_ACCESS_DENIED is returned. This function can also fail because of user account control (UAC) on Windows Vista and Windows Server 2008. If an application that contains this function is executed by a user logged on as a member of the Administrators group other than the built-in Administrator, this call will fail unless the application has been marked in the manifest file with a requestedExecutionLevel set to requireAdministrator. If the application on Windows Vista or Windows Server 2008 lacks this manifest file, a user logged on as a member of the Administrators group other than the built-in Administrator must then be executing the application in an enhanced shell as the built-in Administrator (RunAs administrator) for this function to succeed.
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | Windows Vista [desktop apps only] |
| Minimum supported server | Windows Server 2008 [desktop apps only] |
| Target Platform | Windows |
| Header | iphlpapi.h |
| Library | Iphlpapi.lib |
| DLL | Iphlpapi.dll |
See also
Feedback
Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see: https://aka.ms/ContentUserFeedback.
Submit and view feedback for