TransmitFile function (winsock.h)

The TransmitFile function transmits file data over a connected socket handle. This function uses the operating system's cache manager to retrieve the file data, and provides high-performance file data transfer over sockets.

Note  This function is a Microsoft-specific extension to the Windows Sockets specification.

 

Syntax

BOOL TransmitFile(
  SOCKET                  hSocket,
  HANDLE                  hFile,
  DWORD                   nNumberOfBytesToWrite,
  DWORD                   nNumberOfBytesPerSend,
  LPOVERLAPPED            lpOverlapped,
  LPTRANSMIT_FILE_BUFFERS lpTransmitBuffers,
  DWORD                   dwReserved
);

Parameters

hSocket

A handle to a connected socket. The TransmitFile function will transmit the file data over this socket. The socket specified by the hSocket parameter must be a connection-oriented socket of type SOCK_STREAM, SOCK_SEQPACKET, or SOCK_RDM.

hFile

A handle to the open file that the TransmitFile function transmits. Since the operating system reads the file data sequentially, you can improve caching performance by opening the handle with FILE_FLAG_SEQUENTIAL_SCAN.

The hFile parameter is optional. If the hFile parameter is NULL, only data in the header and/or the tail buffer is transmitted. Any additional action, such as socket disconnect or reuse, is performed as specified by the dwFlags parameter.

nNumberOfBytesToWrite

The number of bytes in the file to transmit. The TransmitFile function completes when it has sent the specified number of bytes, or when an error occurs, whichever occurs first.

Set this parameter to zero in order to transmit the entire file.

nNumberOfBytesPerSend

The size, in bytes, of each block of data sent in each send operation. This parameter is used by Windows' sockets layer to determine the block size for send operations. To select the default send size, set this parameter to zero.

The nNumberOfBytesPerSend parameter is useful for protocols that have limitations on the size of individual send requests.

lpOverlapped

A pointer to an OVERLAPPED structure. If the socket handle has been opened as overlapped, specify this parameter in order to achieve an overlapped (asynchronous) I/O operation. By default, socket handles are opened as overlapped.

You can use the lpOverlapped parameter to specify a 64-bit offset within the file at which to start the file data transfer by setting the Offset and OffsetHigh member of the OVERLAPPED structure. If lpOverlapped is a NULL pointer, the transmission of data always starts at the current byte offset in the file.

When the lpOverlapped is not NULL, the overlapped I/O might not finish before TransmitFile returns. In that case, the TransmitFile function returns FALSE, and WSAGetLastError returns ERROR_IO_PENDING or WSA_IO_PENDING. This enables the caller to continue processing while the file transmission operation completes. Windows will set the event specified by the hEvent member of the OVERLAPPED structure, or the socket specified by hSocket, to the signaled state upon completion of the data transmission request.

lpTransmitBuffers

A pointer to a TRANSMIT_FILE_BUFFERS data structure that contains pointers to data to send before and after the file data is sent. This parameter should be set to a NULL pointer if you want to transmit only the file data.

dwReserved

A set of flags used to modify the behavior of the TransmitFile function call. The dwFlags parameter can contain a combination of the following options defined in the Mswsock.h header file:

Flag Meaning
TF_DISCONNECT
Start a transport-level disconnect after all the file data has been queued for transmission.
TF_REUSE_SOCKET
Prepare the socket handle to be reused. This flag is valid only if TF_DISCONNECT is also specified.

When the TransmitFile request completes, the socket handle can be passed to the function call previously used to establish the connection, such as AcceptEx or ConnectEx. Such reuse is mutually exclusive; for example, if the AcceptEx function was called for the socket, reuse is allowed only for subsequent calls to the AcceptEx function, and not allowed for a subsequent call to ConnectEx.

Note  The socket level file transmit is subject to the behavior of the underlying transport. For example, a TCP socket may be subject to the TCP TIME_WAIT state, causing the TransmitFile call to be delayed.
 
TF_USE_DEFAULT_WORKER
Directs the Windows Sockets service provider to use the system's default thread to process long TransmitFile requests. The system default thread can be adjusted using the following registry parameter as a REG_DWORD:

HKEY_LOCAL_MACHINE\CurrentControlSet\Services\AFD\Parameters\TransmitWorker

TF_USE_SYSTEM_THREAD
Directs the Windows Sockets service provider to use system threads to process long TransmitFile requests.
TF_USE_KERNEL_APC
Directs the driver to use kernel asynchronous procedure calls (APCs) instead of worker threads to process long TransmitFile requests. Long TransmitFile requests are defined as requests that require more than a single read from the file or a cache; the request therefore depends on the size of the file and the specified length of the send packet.

Use of TF_USE_KERNEL_APC can deliver significant performance benefits. It is possible (though unlikely), however, that the thread in which context TransmitFile is initiated is being used for heavy computations; this situation may prevent APCs from launching. Note that the Winsock kernel mode driver uses normal kernel APCs, which launch whenever a thread is in a wait state, which differs from user-mode APCs, which launch whenever a thread is in an alertable wait state initiated in user mode).

TF_WRITE_BEHIND
Complete the TransmitFile request immediately, without pending. If this flag is specified and TransmitFile succeeds, then the data has been accepted by the system but not necessarily acknowledged by the remote end. Do not use this setting with the TF_DISCONNECT and TF_REUSE_SOCKET flags.
Note  If the file being sent is not in the file system cache, the request pends.
 

Return value

If the TransmitFile function succeeds, the return value is TRUE. Otherwise, the return value is FALSE. To get extended error information, call WSAGetLastError. An error code of WSA_IO_PENDING or ERROR_IO_PENDING indicates that the overlapped operation has been successfully initiated and that completion will be indicated at a later time. Any other error code indicates that the overlapped operation was not successfully initiated and no completion indication will occur. Applications should handle either ERROR_IO_PENDING or WSA_IO_PENDING in this case.

Return code Description
WSAECONNABORTED
An established connection was aborted by the software in your host machine. This error is returned if the virtual circuit was terminated due to a time-out or other failure.
WSAECONNRESET
An existing connection was forcibly closed by the remote host. This error is returned for a stream socket when the virtual circuit was reset by the remote side. The application should close the socket as it is no longer usable.
WSAEFAULT
The system detected an invalid pointer address in attempting to use a pointer argument in a call. This error is returned if the lpTransmitBuffers or lpOverlapped parameter is not totally contained in a valid part of the user address space.
WSAEINVAL
An invalid argument was supplied. This error is returned if the hSocket parameter specified a socket of type SOCK_DGRAM or SOCK_RAW. This error is returned if the dwFlags parameter has the TF_REUSE_SOCKET flag set, but the TF_DISCONNECT flag was not set. This error is also returned if the offset specified in the OVERLAPPED structure pointed to by the lpOverlapped is not within the file. This error is also returned if the nNumberOfBytesToWrite parameter is set to a value greater than 2,147,483,646, the maximum value for a 32-bit integer minus 1.
WSAENETDOWN
A socket operation encountered a dead network.This error is returned if the network subsystem has failed.
WSAENETRESET
The connection has been broken due to keep-alive activity detecting a failure while the operation was in progress.
WSAENOBUFS
An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full. This error is also returned if the Windows Sockets provider reports a buffer deadlock.
WSAENOTCONN
A request to send or receive data was disallowed because the socket is not connected.
WSAENOTSOCK
An operation was attempted on something that is not a socket. This error is returned if the hSocket parameter is not a socket.
WSAESHUTDOWN
A request to send or receive data was disallowed because the socket had already been shut down in that direction with a previous shutdown call. This error is returned if the socket has been shut down for sending. It is not possible to call TransmitFile on a socket after the shutdown function has been called on the socket with the how parameter set to SD_SEND or SD_BOTH.
WSANOTINITIALISED
Either the application has not called the WSAStartup function, or WSAStartup failed. A successful WSAStartup call must occur before using the TransmitFile function.
WSA_IO_PENDING
An overlapped I/O operation is in progress. This value is returned if an overlapped I/O operation was successfully initiated and indicates that completion will be indicated at a later time.
WSA_OPERATION_ABORTED
The I/O operation has been aborted because of either a thread exit or an application request. This error is returned if the overlapped operation has been canceled due to the closure of the socket, the execution of the "SIO_FLUSH" command in WSAIoctl, or the thread that initiated the overlapped request exited before the operation completed.
Note  All I/O initiated by a given thread is canceled when that thread exits. For overlapped sockets, pending asynchronous operations can fail if the thread is closed before the asynchronous operations complete. For more information, see ExitThread.
 

Remarks

The TransmitFile function uses the operating system's cache manager to retrieve the file data, and provide high-performance file data transfer over sockets.

The TransmitFile function only supports connection-oriented sockets of type SOCK_STREAM, SOCK_SEQPACKET, and SOCK_RDM. Sockets of type SOCK_DGRAM and SOCK_RAW are not supported. The TransmitPackets function can be used with sockets of type SOCK_DGRAM.

The maximum number of bytes that can be transmitted using a single call to the TransmitFile function is 2,147,483,646, the maximum value for a 32-bit integer minus 1. The maximum number of bytes to send in a single call includes any data sent before or after the file data pointed to by the lpTransmitBuffers parameter plus the value specified in the nNumberOfBytesToWrite parameter for the length of file data to send. If an application needs to transmit a file larger than 2,147,483,646 bytes, then multiple calls to the TransmitFile function can be used with each call transferring no more than 2,147,483,646 bytes. Setting the nNumberOfBytesToWrite parameter to zero for a file larger than 2,147,483,646 bytes will also fail since in this case the TransmitFile function will use the size of the file as the value for the number of bytes to transmit.

Note  The function pointer for the TransmitFile function must be obtained at run time by making a call to the WSAIoctl function with the SIO_GET_EXTENSION_FUNCTION_POINTER opcode specified. The input buffer passed to the WSAIoctl function must contain WSAID_TRANSMITFILE, a globally unique identifier (GUID) whose value identifies the TransmitFile extension function. On success, the output returned by the WSAIoctl function contains a pointer to the TransmitFile function. The WSAID_TRANSMITFILE GUID is defined in the Mswsock.h header file.
 
Note  TransmitFile is not functional on transports that perform their own buffering. Transports with the TDI_SERVICE_INTERNAL_BUFFERING flag set, such as ADSP, perform their own buffering. Because TransmitFile achieves its performance gains by sending data directly from the file cache. Transports that run out of buffer space on a particular connection are not handled by TransmitFile, and as a result of running out of buffer space on the connection, TransmitFile returns STATUS_DEVICE_NOT_READY.
 
The TransmitFile function was primarily added to Winsock for use by high-performance server applications (web and ftp servers, for example).

Workstation and client versions of Windows optimize the TransmitFile function for minimum memory and resource utilization by limiting the number of concurrent TransmitFile operations allowed on the system to a maximum of two. On Windows Vista, Windows XP, Windows 2000 Professional, and Windows NT Workstation 3.51 and later only two outstanding TransmitFile requests are handled simultaneously; the third request will wait until one of the previous requests is completed.

Server versions of Windows optimize the TransmitFile function for high performance. On server versions, there are no default limits placed on the number of concurrent TransmitFile operations allowed on the system. Expect better performance results when using TransmitFile on server versions of Windows. On server versions of Windows, it is possible to set a limit on the maximum number of concurrent TransmitFile operations by creating a registry entry and setting a value for the following REG_DWORD:

HKEY_LOCAL_MACHINE\CurrentControlSet\Services\AFD\Parameters\MaxActiveTransmitFileCount

If the TransmitFile function is called with TCP socket (protocol of IPPROTO_TCP) with both the TF_DISCONNECT and TF_REUSE_SOCKET flags specified, the call will not complete until the two following conditions are met.

  • All pending receive data sent by remote side (received prior to a FIN from the remote side) on the TCP socket has been read.
  • The remote side has closed the connection (completed the graceful TCP connection closure).

If the TransmitFile function is called with the lpOverlapped parameter set to NULL, the operation is executed as synchronous I/O. The function will not complete until the file has been sent.

Windows Phone 8: This function is supported for Windows Phone Store apps on Windows Phone 8 and later.

Windows 8.1 and Windows Server 2012 R2: This function is supported for Windows Store apps on Windows 8.1, Windows Server 2012 R2, and later.

Notes for QoS

The TransmitFile function allows the setting of two flags, TF_DISCONNECT or TF_REUSE_SOCKET, that return the socket to a "disconnected, reusable" state after the file has been transmitted. These flags should not be used on a socket where quality of service has been requested, since the service provider may immediately delete any quality of service associated with the socket before the file transfer has completed. The best approach for a QoS-enabled socket is to simply call the closesocket function when the file transfer has completed, rather than relying on these flags.

Requirements

Requirement Value
Minimum supported client Windows 8.1, Windows Vista [desktop apps | UWP apps]
Minimum supported server Windows Server 2003 [desktop apps | UWP apps]
Target Platform Windows
Header winsock.h (include Mswsock.h)
Library Mswsock.lib
DLL Mswsock.dll

See also

ExitThread

OVERLAPPED

TRANSMIT_FILE_BUFFERS

TransmitPackets

WSASend

closesocket