Edit

Share via


glMap1f function

The glMap1d and glMap1f functions define a one-dimensional evaluator.

Syntax

void WINAPI glMap1f(
         GLenum  target,
         GLfloat u1,
         GLfloat u2,
         GLint   stride,
         GLint   order,
   const GLfloat *points
);

Parameters

target

The kind of values that are generated by the evaluator. Symbolic constants. The target parameter is a symbolic constant that indicates what kind of control points are provided in points, and what output is generated when the map is evaluated. It can assume one of nine predefined values.

Value Meaning
GL_MAP1_VERTEX_3
Each control point is three floating-point values representing x, y, and z. Internal glVertex3 commands are generated when the map is evaluated.
GL_MAP1_VERTEX_4
Each control point is four floating-point values representing x, y, z, and w. Internal glVertex4 commands are generated when the map is evaluated.
GL_MAP1_INDEX
Each control point is a single floating-point value representing a color index. Internal glIndex commands are generated when the map is evaluated. However, the current index is not updated with the value of these glIndex commands.
GL_MAP1_COLOR_4
Each control point is four floating-point values representing red, green, blue, and alpha. Internal glColor4 commands are generated when the map is evaluated. However, the current color is not updated with the value of these glColor4 commands.
GL_MAP1_NORMAL
Each control point is three floating-point values representing the x, y, and z components of a normal vector. Internal glNormal commands are generated when the map is evaluated. However, the current normal is not updated with the value of these glNormal commands.
GL_MAP1_TEXTURE_COORD_1
Each control point is a single floating-point value representing the s texture coordinate. Internal glTexCoord1 commands are generated when the map is evaluated. However, the current texture coordinates are not updated with the value of these glTexCoord commands.
GL_MAP1_TEXTURE_COORD_2
Each control point is two floating-point values representing the s and t texture coordinates. Internal glTexCoord2 commands are generated when the map is evaluated. However, the current texture coordinates are not updated with the value of these glTexCoord commands.
GL_MAP1_TEXTURE_COORD_3
Each control point is three floating-point values representing the s, t, and r texture coordinates. Internal glTexCoord3 commands are generated when the map is evaluated. However, the current texture coordinates are not updated with the value of these glTexCoord commands.
GL_MAP1_TEXTURE_COORD_4
Each control point is four floating-point values representing the s, t, r, and q texture coordinates. Internal glTexCoord4 commands are generated when the map is evaluated. However, the current texture coordinates are not updated with the value of these glTexCoord commands.

u1

A linear mapping of u, as presented to glEvalCoord1, to u^, the variable that is evaluated by the equations specified by this command.

u2

A linear mapping of u, as presented to glEvalCoord1, to u^, the variable that is evaluated by the equations specified by this command.

stride

The number of floats or doubles between the beginning of one control point and the beginning of the next one in the data structure referenced in points. This allows control points to be embedded in arbitrary data structures. The only constraint is that the values for a particular control point must occupy contiguous memory locations.

order

The number of control points. Must be positive.

points

A pointer to the array of control points.

Return value

This function does not return a value.

Error codes

The following error codes can be retrieved by the glGetError function.

Name Meaning
GL_INVALID_ENUM
target was not an accepted value.
GL_INVALID_VALUE
u1 was equal to u2.
GL_INVALID_VALUE
stride was less than the number of values in a control point.
GL_INVALID_VALUE
order was less than one or GL_MAX_EVAL_ORDER.
GL_INVALID_OPERATION
The function was called between a call to glBegin and the corresponding call to glEnd.

Remarks

Evaluators provide a way to use polynomial or rational polynomial mapping to produce vertices, normals, texture coordinates, and colors. The values produced by an evaluator are sent to further stages of OpenGL processing just as if they had been presented using glVertex, glNormal, glTexCoord, and glColor commands, except that the generated values do not update the current normal, texture coordinates, or color.

All polynomial or rational polynomial splines of any degree (up to the maximum degree supported by the OpenGL implementation) can be described using evaluators. These include almost all splines used in computer graphics, including B-splines, Bezier curves, Hermite splines, and so on.

Evaluators define curves based on Bernstein polynomials. Define p () as

Equation showing the definition of p ().

where Ri is a control point and () is the i the Bernstein polynomial of degree n (order =n + 1):

Equation showing the Bernstein polynomial of degree n.

Recall that

Equations showing equivalence to 1.

The glMap1 function is used to define the basis and to specify what kind of values are produced. Once defined, a map can be enabled and disabled by calling glEnable and glDisable with the map name, one of the nine predefined values for target described above. The glEvalCoord1 function evaluates the one-dimensional maps that are enabled. When glEvalCoord1 presents a value u, the Bernstein functions are evaluated using u^, where

Equation showing the definition of u^.

The stride, order, and points parameters define the array addressing for accessing the control points. The points parameter is the location of the first control point, which occupies one, two, three, or four contiguous memory locations, depending on which map is being defined. The order parameter is the number of control points in the array. The stride parameter tells how many float or double locations to advance the internal memory pointer to reach the next control point.

As is the case with all OpenGL commands that accept pointers to data, it is as if the contents of points were copied by glMap1 before it returned. Changes to the contents of points have no effect after glMap1 is called.

The following functions retrieve information related to glMap1:

glGet with argument GL_MAX_EVAL_ORDER

glGetMap

glIsEnabled with argument GL_MAP1_VERTEX_3

glIsEnabled with argument GL_MAP1_VERTEX_4

glIsEnabled with argument GL_MAP1_INDEX

glIsEnabled with argument GL_MAP1_COLOR_4

glIsEnabled with argument GL_MAP1_NORMAL

glIsEnabled with argument GL_MAP1_TEXTURE_COORD_1

glIsEnabled with argument GL_MAP1_TEXTURE_COORD_2

glIsEnabled with argument GL_MAP1_TEXTURE_COORD_3

glIsEnabled with argument GL_MAP1_TEXTURE_COORD_4

Requirements

Requirement Value
Minimum supported client
Windows 2000 Professional [desktop apps only]
Minimum supported server
Windows 2000 Server [desktop apps only]
Header
Gl.h
Library
Opengl32.lib
DLL
Opengl32.dll

See also

glBegin

glColor

glEnable

glEnd

glEvalCoord

glEvalMesh

glEvalPoint

glMap2

glMapGrid

glNormal

glTexCoord

glVertex