Editar

Compartir a través de


New-AzPolicyAssignment

Creates or updates a policy assignment.

Syntax

New-AzPolicyAssignment
   -Name <String>
   [-Scope <String>]
   [-NotScope <String[]>]
   [-DisplayName <String>]
   [-Description <String>]
   [-Metadata <String>]
   [-EnforcementMode <String>]
   [-IdentityType <String>]
   [-IdentityId <String>]
   [-Location <String>]
   [-NonComplianceMessage <PSObject[]>]
   [-Override <IOverride[]>]
   [-ResourceSelector <IResourceSelector[]>]
   [-BackwardCompatible]
   [-DefaultProfile <PSObject>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
New-AzPolicyAssignment
   -Name <String>
   [-Scope <String>]
   [-NotScope <String[]>]
   [-DisplayName <String>]
   [-Description <String>]
   [-Metadata <String>]
   [-EnforcementMode <String>]
   [-IdentityType <String>]
   [-IdentityId <String>]
   [-Location <String>]
   [-NonComplianceMessage <PSObject[]>]
   [-Override <IOverride[]>]
   [-ResourceSelector <IResourceSelector[]>]
   [-BackwardCompatible]
   [-PolicyDefinition <PSObject>]
   [-DefinitionVersion <String>]
   -PolicyParameterObject <Hashtable>
   [-DefaultProfile <PSObject>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
New-AzPolicyAssignment
   -Name <String>
   [-Scope <String>]
   [-NotScope <String[]>]
   [-DisplayName <String>]
   [-Description <String>]
   [-Metadata <String>]
   [-EnforcementMode <String>]
   [-IdentityType <String>]
   [-IdentityId <String>]
   [-Location <String>]
   [-NonComplianceMessage <PSObject[]>]
   [-Override <IOverride[]>]
   [-ResourceSelector <IResourceSelector[]>]
   [-BackwardCompatible]
   [-PolicyDefinition <PSObject>]
   [-DefinitionVersion <String>]
   -PolicyParameter <String>
   [-DefaultProfile <PSObject>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
New-AzPolicyAssignment
   -Name <String>
   [-Scope <String>]
   [-NotScope <String[]>]
   [-DisplayName <String>]
   [-Description <String>]
   [-Metadata <String>]
   [-EnforcementMode <String>]
   [-IdentityType <String>]
   [-IdentityId <String>]
   [-Location <String>]
   [-NonComplianceMessage <PSObject[]>]
   [-Override <IOverride[]>]
   [-ResourceSelector <IResourceSelector[]>]
   [-BackwardCompatible]
   -PolicyDefinition <PSObject>
   [-DefinitionVersion <String>]
   [-DefaultProfile <PSObject>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

The New-AzPolicyAssignment cmdlet creates or updates a policy assignment with the given scope and name. Policy assignments apply to all resources contained within their scope. For example, when you assign a policy at resource group scope, that policy applies to all resources in the group.

Examples

Example 1: Policy assignment at subscription level

$Subscription = Get-AzSubscription -SubscriptionName 'Subscription01'
$Policy = Get-AzPolicyDefinition -Name 'VirtualMachinePolicy'
New-AzPolicyAssignment -Name 'VirtualMachinePolicyAssignment' -PolicyDefinition $Policy -Scope "/subscriptions/$($Subscription.Id)"

The first command gets a subscription named Subscription01 by using the Get-AzSubscription cmdlet and stores it in the $Subscription variable. The second command gets the policy definition named VirtualMachinePolicy by using the Get-AzPolicyDefinition cmdlet and stores it in the $Policy variable. The final command assigns the policy in $Policy at the level of the subscription identified by the subscription scope string.

Example 2: Policy assignment at resource group level

$ResourceGroup = Get-AzResourceGroup -Name 'ResourceGroup11'
$Policy = Get-AzPolicyDefinition -Name 'VirtualMachinePolicy'
New-AzPolicyAssignment -Name 'VirtualMachinePolicyAssignment' -PolicyDefinition $Policy -Scope $ResourceGroup.ResourceId

The first command gets a resource group named ResourceGroup11 by using the Get-AzResourceGroup cmdlet and stores it in the $ResourceGroup variable. The second command gets the policy definition named VirtualMachinePolicy by using the Get-AzPolicyDefinition cmdlet and stores it in the $Policy variable. The final command assigns the policy in $Policy at the level of the resource group identified by the ResourceId property of $ResourceGroup.

Example 3: Policy assignment at resource group level with policy parameter object

$ResourceGroup = Get-AzResourceGroup -Name 'ResourceGroup11'
$Policy = Get-AzPolicyDefinition -BuiltIn | Where-Object {$_.DisplayName -eq 'Allowed locations'}
$Locations = Get-AzLocation | Where-Object displayname -like '*east*'
$AllowedLocations = @{'listOfAllowedLocations'=($Locations.location)}
New-AzPolicyAssignment -Name 'RestrictLocationPolicyAssignment' -PolicyDefinition $Policy -Scope $ResourceGroup.ResourceId -PolicyParameterObject $AllowedLocations

The first command gets a resource group named ResourceGroup11 by using the Get-AzResourceGroup cmdlet. The command stores that object in the $ResourceGroup variable. The second command gets the built-in policy definition for allowed locations by using the Get-AzPolicyDefinition cmdlet. The command stores that object in the $Policy variable. The third and fourth commands create an object containing all Azure regions with "east" in the name. The commands store that object in the $AllowedLocations variable. The final command assigns the policy in $Policy at the level of a resource group using the policy parameter object in $AllowedLocations. The ResourceId property of $ResourceGroup identifies the resource group.

Example 4: Policy assignment at resource group level with policy parameter file

'{
    "listOfAllowedLocations":  {
      "value": [
        "westus",
        "westeurope",
        "japanwest"
      ]
    }
}' > .\AllowedLocations.json

$ResourceGroup = Get-AzResourceGroup -Name 'ResourceGroup11'
$Policy = Get-AzPolicyDefinition -BuiltIn | Where-Object {$_.DisplayName -eq 'Allowed locations'}
New-AzPolicyAssignment -Name 'RestrictLocationPolicyAssignment' -PolicyDefinition $Policy -Scope $ResourceGroup.ResourceId -PolicyParameter .\AllowedLocations.json

The first command creates a parameter file called AllowedLocations.json in the local working directory. The second command gets a resource group named ResourceGroup11 by using the Get-AzResourceGroup cmdlet and stores it in the $ResourceGroup variable. The third command gets the built-in policy definition for allowed locations by using the Get-AzPolicyDefinition cmdlet and stores it in the $Policy variable. The final command assigns the policy in $Policy at the resource group identified by the ResourceId property of $ResourceGroup using the policy parameter file AllowedLocations.json from the local working directory.

Example 5: Policy assignment with a system assigned managed identity

$ResourceGroup = Get-AzResourceGroup -Name 'ResourceGroup11'
$Policy = Get-AzPolicyDefinition -Name 'VirtualMachinePolicy'
New-AzPolicyAssignment -Name 'VirtualMachinePolicyAssignment' -PolicyDefinition $Policy -Scope $ResourceGroup.ResourceId -Location 'eastus' -IdentityType 'SystemAssigned'

The first command gets a resource group named ResourceGroup11 by using the Get-AzResourceGroup cmdlet and stores it in the $ResourceGroup variable. The second command gets the policy definition named VirtualMachinePolicy by using the Get-AzPolicyDefinition cmdlet and stores it in the $Policy variable. The final command assigns the policy in $Policy to the resource group. A system assigned managed identity is automatically created and assigned to the policy assignment.

Example 6: Policy assignment with a user assigned managed identity

$ResourceGroup = Get-AzResourceGroup -Name 'ResourceGroup11'
$Policy = Get-AzPolicyDefinition -Name 'VirtualMachinePolicy'
$UserAssignedIdentity = Get-AzUserAssignedIdentity -ResourceGroupName 'ResourceGroup1' -Name 'UserAssignedIdentity1'
New-AzPolicyAssignment -Name 'VirtualMachinePolicyAssignment' -PolicyDefinition $Policy -Scope $ResourceGroup.ResourceId -Location 'eastus' -IdentityType 'UserAssigned' -IdentityId $UserAssignedIdentity.Id

The first command gets a resource group named ResourceGroup11 by using the Get-AzResourceGroup cmdlet and stores it in the $ResourceGroup variable. The second command gets the policy definition named VirtualMachinePolicy by using the Get-AzPolicyDefinition cmdlet and stores it in the $Policy variable. The third command gets the user assigned managed identity named UserAssignedIdentity1 by using the Get-AzUserAssignedIdentity cmdlet and stores it in the $UserAssignedIdentity variable. The final command assigns the policy in $Policy to the resource group. The user assigned managed identity identified by the Id property of $UserAssignedIdentity is assigned to the policy assignment by passing the Id* property to the IdentityId parameter.

Example 7: Policy assignment with an enforcement mode property

$Subscription = Get-AzSubscription -SubscriptionName 'Subscription01'
$Policy = Get-AzPolicyDefinition -Name 'VirtualMachinePolicy'
New-AzPolicyAssignment -Name 'VirtualMachinePolicyAssignment' -PolicyDefinition $Policy -Scope "/subscriptions/$($Subscription.Id)" -EnforcementMode DoNotEnforce

The first command gets a subscription named Subscription01 by using the Get-AzSubscription cmdlet and stores it in the $Subscription variable. The second command gets the policy definition named VirtualMachinePolicy by using the Get-AzPolicyDefinition cmdlet and stores it in the $Policy variable. The final command assigns the policy in $Policy at the level of the subscription identified by the subscription scope string.

The assignment is set with an EnforcementMode value of DoNotEnforce i.e. the policy effect is not enforced during resource creation or update.

Example 8: Policy assignment with non-compliance messages

$PolicySet = Get-AzPolicySetDefinition -Name 'VirtualMachinePolicySet'
$NonComplianceMessages = @(@{Message="Only DsV2 SKUs are allowed."; PolicyDefinitionReferenceId="DefRef1"}, @{Message="Virtual machines must follow cost management best practices."})
New-AzPolicyAssignment -Name 'VirtualMachinePolicyAssignment' -PolicySetDefinition $PolicySet -NonComplianceMessage $NonComplianceMessages

The first command gets the policy set definition named VirtualMachinePolicySet by using the Get-AzPolicySetDefinition cmdlet and stores it in the $PolicySet variable. The second command creates an array of non-compliance messages. One general purpose message for the entire assignment and one message specific to a SKU restriction policy within the assigned policy set definition. The final command assigns the policy set definition in $PolicySet to the subscription with two non-compliance messages that will be shown if a resource is denied by policy.

Example 9: Policy assignment with resource selector

$Policy = Get-AzPolicyDefinition -Name 'VirtualMachinePolicy'
$ResourceSelector = @{Name = "MyLocationSelector"; Selector = @(@{Kind = "resourceLocation"; In = @("eastus", "eastus2")})}
New-AzPolicyAssignment -Name 'VirtualMachinePolicyAssignment' -PolicyDefinition $Policy -ResourceSelector $ResourceSelector

The first command gets the policy definition named VirtualMachinePolicy by using the Get-AzPolicyDefinition cmdlet and stores it in the $Policy variable. The second command creates a resource selector object that will be used to specify the assignment should only apply to resources located in East US or East US 2 and stores it in the $ResourceSelector variable. The final command assigns the policy definition in $Policy to the subscription with the resource selector specified by $ResourceSelector.

Example 10: Policy assignment with override

$Policy = Get-AzPolicyDefinition -Name 'VirtualMachinePolicy'
$Selector = @{Kind = "resourceLocation"; In = @("eastus", "eastus2")}
$Override = @(@{Kind = "policyEffect"; Value = 'Disabled'; Selector = @($Selector)})
New-AzPolicyAssignment -Name 'VirtualMachinePolicyAssignment' -PolicyDefinition $Policy -Override $Override

The first command gets the policy definition named VirtualMachinePolicy by using the Get-AzPolicyDefinition cmdlet and stores it in the $Policy variable. The second command creates a location selector specifying East US or East US 2 locations and stores it in the $Selector variable. The third command creates an override object that will be used to specify that the assigned definition should have a Disabled effect in the locations identified by the $Selector object and stores it in the $Override variable. The final command assigns the policy definition in $Policy to the subscription with the override specified by $Override.

Example 11: [Backcompat] Policy assignment at resource group level with policy parameter object

$ResourceGroup = Get-AzResourceGroup -Name 'ResourceGroup11'
$Policy = Get-AzPolicyDefinition -BuiltIn | Where-Object {$_.Properties.DisplayName -eq 'Allowed locations'}
$Locations = Get-AzLocation | Where-Object displayname -like '*east*'
$AllowedLocations = @{'listOfAllowedLocations'=($Locations.location)}
New-AzPolicyAssignment -Name 'RestrictLocationPolicyAssignment' -PolicyDefinition $Policy -Scope $ResourceGroup.ResourceId -PolicyParameterObject $AllowedLocations

The first command gets a resource group named ResourceGroup11 by using the Get-AzResourceGroup cmdlet. The command stores that object in the $ResourceGroup variable. The second command gets the built-in policy definition for allowed locations by using the Get-AzPolicyDefinition cmdlet. The command stores that object in the $Policy variable. The third and fourth commands create an object containing all Azure regions with "east" in the name. The commands store that object in the $AllowedLocations variable. The final command assigns the policy in $Policy at the level of a resource group using the policy parameter object in $AllowedLocations. The ResourceId property of $ResourceGroup identifies the resource group.

Example 12: [Backcompat] Policy assignment at resource group level with policy parameter file

'{
    "listOfAllowedLocations":  {
      "value": [
        "westus",
        "westeurope",
        "japanwest"
      ]
    }
}' > .\AllowedLocations.json

$ResourceGroup = Get-AzResourceGroup -Name 'ResourceGroup11'
$Policy = Get-AzPolicyDefinition -BuiltIn | Where-Object {$_.Properties.DisplayName -eq 'Allowed locations'}
New-AzPolicyAssignment -Name 'RestrictLocationPolicyAssignment' -PolicyDefinition $Policy -Scope $ResourceGroup.ResourceId -PolicyParameter .\AllowedLocations.json

The first command creates a parameter file called AllowedLocations.json in the local working directory. The second command gets a resource group named ResourceGroup11 by using the Get-AzResourceGroup cmdlet and stores it in the $ResourceGroup variable. The third command gets the built-in policy definition for allowed locations by using the Get-AzPolicyDefinition cmdlet and stores it in the $Policy variable. The final command assigns the policy in $Policy at the resource group identified by the ResourceId property of $ResourceGroup using the policy parameter file AllowedLocations.json from the local working directory.

Parameters

-BackwardCompatible

Causes cmdlet to return artifacts using legacy format placing policy-specific properties in a property bag object.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-DefaultProfile

The DefaultProfile parameter is not functional. Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.

Type:PSObject
Aliases:AzureRMContext, AzureCredential
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-DefinitionVersion

Indicate version of policy definition or policy set definition

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Description

This message will be part of response in case of policy violation.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-DisplayName

The display name of the policy assignment.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-EnforcementMode

The policy assignment enforcement mode. Possible values are Default and DoNotEnforce.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-IdentityId

The user identity associated with the policy. The user identity dictionary key references will be ARM resource ids in the form: '/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ManagedIdentity/userAssignedIdentities/{identityName}'.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-IdentityType

The identity type. This is the only required field when adding a system or user assigned identity to a resource.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Location

The location of the policy assignment. Only required when utilizing managed identity.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-Metadata

The policy assignment metadata. Metadata is an open ended object and is typically a collection of key value pairs.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-Name

The name of the policy assignment.

Type:String
Aliases:PolicyAssignmentName
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-NonComplianceMessage

The messages that describe why a resource is non-compliant with the policy. To construct, see NOTES section for NONCOMPLIANCEMESSAGE properties and create a hash table.

Type:PSObject[]
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-NotScope

The policy's excluded scopes.

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-Override

The policy property value override.

Type:IOverride[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-PolicyDefinition

Accept policy definition or policy set definition object

Type:PSObject
Aliases:PolicySetDefinition
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-PolicyParameter

The parameter values for the assigned policy rule. The keys are the parameter names.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-PolicyParameterObject

The parameter values for the assigned policy rule. The keys are the parameter names.

Type:Hashtable
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-ResourceSelector

The resource selector list to filter policies by resource properties.

Type:IResourceSelector[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Scope

The scope of the policy assignment. Valid scopes are: management group (format: '/providers/Microsoft.Management/managementGroups/{managementGroup}'), subscription (format: '/subscriptions/{subscriptionId}'), resource group (format: '/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}', or resource (format: '/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/{resourceProviderNamespace}/[{parentResourcePath}/]{resourceType}/{resourceName}'

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

Inputs

PSObject

PSObject[]

String

String[]

Outputs

IPolicyAssignment