Set-CMAccessAccount
Modifica las propiedades de una cuenta de acceso.
Syntax
Set-CMAccessAccount
-Access <AccessRight>
-AccountType <AccessAccountType>
[-InputObject] <IResultObject>
[-PassThru]
[-UserName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMAccessAccount
-Access <AccessRight>
-AccountType <AccessAccountType>
-ApplicationId <String>
[-PassThru]
[-UserName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMAccessAccount
-Access <AccessRight>
-AccountType <AccessAccountType>
-ApplicationName <String>
[-PassThru]
[-UserName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMAccessAccount
-Access <AccessRight>
-AccountType <AccessAccountType>
-BootImageId <String>
[-PassThru]
[-UserName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMAccessAccount
-Access <AccessRight>
-AccountType <AccessAccountType>
-BootImageName <String>
[-PassThru]
[-UserName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMAccessAccount
-Access <AccessRight>
-AccountType <AccessAccountType>
-DriverPackageId <String>
[-PassThru]
[-UserName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMAccessAccount
-Access <AccessRight>
-AccountType <AccessAccountType>
-DriverPackageName <String>
[-PassThru]
[-UserName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMAccessAccount
-Access <AccessRight>
-AccountType <AccessAccountType>
-OperatingSystemImageId <String>
[-PassThru]
[-UserName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMAccessAccount
-Access <AccessRight>
-AccountType <AccessAccountType>
-OperatingSystemImageName <String>
[-PassThru]
[-UserName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMAccessAccount
-Access <AccessRight>
-AccountType <AccessAccountType>
-OperatingSystemInstallerId <String>
[-PassThru]
[-UserName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMAccessAccount
-Access <AccessRight>
-AccountType <AccessAccountType>
-OperatingSystemInstallerName <String>
[-PassThru]
[-UserName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMAccessAccount
-Access <AccessRight>
-AccountType <AccessAccountType>
-PackageId <String>
[-PassThru]
[-UserName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMAccessAccount
-Access <AccessRight>
-AccountType <AccessAccountType>
-PackageName <String>
[-PassThru]
[-UserName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMAccessAccount
-Access <AccessRight>
-AccountType <AccessAccountType>
[-PassThru]
-SoftwareUpdateDeploymentPackageId <String>
[-UserName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMAccessAccount
-Access <AccessRight>
-AccountType <AccessAccountType>
[-PassThru]
-SoftwareUpdateDeploymentPackageName <String>
[-UserName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
El cmdlet Set-CMAccessAccount modifica las propiedades de una cuenta de acceso. Puede agregar usuarios o grupos a la cuenta de acceso y cambiar el nivel de permisos a los objetos a los que tienen permisos.
Una cuenta de acceso es una lista de usuarios o grupos que pueden acceder a un servicio o aplicación establecido que se encuentra en un punto de distribución. Por ejemplo, los miembros de la cuenta de acceso de punto de actualización de software pueden acceder a dos servicios para administrar las actualizaciones de software: Windows Server Update Services (WSUS) y el Administrador de sincronización de WSUS.
Nota:
Ejecute cmdlets de Configuration Manager desde la unidad de sitio Configuration Manager, por ejemploPS XYZ:\>. Para obtener más información, consulte Introducción.
Ejemplos
Ejemplo 1: Cambiar el acceso a un paquete mediante el nombre del paquete
PS XYZ:\> $Name = Get-CMAccessAccount -PackageName "Configuration Manager Client Package"
PS XYZ:\> Set-CMAccessAccount -PackageName $Name -Type User -UserName "CONTOSO\PFuller" -Access Read -ConfirmEl primer comando obtiene el nombre del paquete y, a continuación, lo almacena en la variable $Name.
El segundo comando establece los permisos de acceso para el usuario en el paquete en Lectura. Debe confirmar la acción antes de que el comando la realice.
Parámetros
-Access
Especifica los derechos de acceso asociados a una cuenta de acceso. Los valores válidos son: Sin acceso, Lectura, Cambio y Control total.
| Type: | AccessRight |
| Accepted values: | NoAccess, Read, Change, FullControl |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AccountType
Especifica un tipo de cuenta. Los valores válidos son: Invitado, Usuario, WindowsGroup y WindowsUser.
| Type: | AccessAccountType |
| Accepted values: | User, Guest, Administrator, WindowsUser, WindowsGroup |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ApplicationId
Especifica el identificador de una aplicación.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ApplicationName
Especifica el nombre de una aplicación.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-BootImageId
Especifica el identificador de una imagen de arranque.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-BootImageName
Especifica el nombre de una imagen de arranque.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Solicitará confirmación antes de ejecutar el cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableWildcardHandling
Este parámetro trata los caracteres comodín como valores de caracteres literales. No se puede combinar con ForceWildcardHandling.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DriverPackageId
Especifica el identificador de un paquete de controladores.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DriverPackageName
Especifica el nombre de un paquete de controladores.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ForceWildcardHandling
Este parámetro procesa caracteres comodín y puede provocar un comportamiento inesperado (no recomendado). No se puede combinar con DisableWildcardHandling.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-InputObject
| Type: | IResultObject |
| Aliases: | DriverPackage, Application, OperatingSystemImage, OperatingSystemInstaller, Package, SoftwareUpdateDeploymentPackage, BootImage |
| Position: | 0 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-OperatingSystemImageId
Especifica el identificador de una imagen de sistema operativo.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-OperatingSystemImageName
Especifica el nombre de una imagen de sistema operativo.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-OperatingSystemInstallerId
Especifica el identificador de un instalador de sistema operativo.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-OperatingSystemInstallerName
Especifica el nombre de un instalador de sistema operativo.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PackageId
Especifica el identificador de un script o programa de software implementado.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PackageName
Especifica el nombre de un script o programa de software implementado.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PassThru
Agregue este parámetro para devolver un objeto que represente el elemento con el que está trabajando. De forma predeterminada, este cmdlet no puede generar ninguna salida.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SoftwareUpdateDeploymentPackageId
Especifica el identificador de una actualización de software implementada.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SoftwareUpdateDeploymentPackageName
Especifica el nombre de una actualización de software implementada.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UserName
Especifica un nombre de cuenta de usuario de Windows en formato dominio/usuario.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Muestra lo que ocurriría si se ejecuta el cmdlet. El cmdlet no se ejecuta.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Entradas
Microsoft.ConfigurationManagement.ManagementProvider.IResultObject
Salidas
System.Object
Vínculos relacionados
Comentarios
Próximamente: A lo largo de 2024 iremos eliminando gradualmente GitHub Issues como mecanismo de comentarios sobre el contenido y lo sustituiremos por un nuevo sistema de comentarios. Para más información, vea: https://aka.ms/ContentUserFeedback.
Enviar y ver comentarios de