Compartir a través de


Add-SCVMHostNetworkAdapter

Adds a physical network adapter on a host managed by VMM to a virtual network.

Syntax

Default (Default)

Add-SCVMHostNetworkAdapter
    -VirtualNetwork <VirtualNetwork>
    [-VLanEnabled]
    [-VLanMode <VlanMode>]
    [-VLanID <UInt16>]
    [-VLanTrunkID <UInt16[]>]
    [-VMHostNetworkAdapter] <HostNetworkAdapter>
    [-JobGroup <Guid>]
    [-RunAsynchronously]
    [-PROTipID <Guid>]
    [-JobVariable <String>]
    [<CommonParameters>]

Description

The Add-SCVMHostNetworkAdapter cmdlet adds a physical network adapter (also called a network interface card, or NIC) on a host managed by Virtual Machine Manager (VMM) to a virtual network. Each virtual machine on that host can also connect through a virtual network adapter to that virtual network.

A virtual network configured on a host can connect to multiple virtual network adapters on virtual machines deployed on that host.

VMM for System Center 2019 and later includes virtual networking support for configuring one or more Virtual Local Area Networks (VLANs) on a host. You can use the Add-SCVMHostNetworkAdapter cmdlet or the Set-SCVMHostNetworkAdapter cmdlet to configure a single VLAN or multiple VLANs on a host. To configure corresponding VLAN settings on a virtual machine, use the New-SCVirtualNetworkAdapter cmdlet or the Set-SCVirtualNetworkAdapter cmdlet.

For an illustration of each type of VLAN, see the examples for this cmdlet.

Examples

Example 1: Add a physical host network adapter to a virtual network

PS C:\> $VMHost = Get-SCVMHost -ComputerName "VMHost01.Contoso.com"
PS C:\> $VirtualNetwork = Get-SCVirtualNetwork -VMHost $VMHost -Name "ExternalVirtualNetwork01"
PS C:\> $VMHostNetworkAdapter = Get-SCVMHostNetworkAdapter -VMHost $VMHost -Name "HostAdapter01"
PS C:\> Add-SCVMHostNetworkAdapter -VirtualNetwork $VirtualNetwork -VMHostNetworkAdapter $VMHostNetworkAdapter

The first command gets the host object named VMHost01 and stores the object in the $VMHost variable.

The second command gets the virtual network object named ExternalVirtualNetwork01 on VMHost01 and stores the object in the $VirtualNetwork variable.

The third command gets the physical network adapter object named HostAdapter01 on VMHost01 and stores the object in the $VMHostNetworkAdapter variable.

The last command adds HostAdapter01 to ExternalVirtualNetwork01.

Note: You can add only one physical host adapter per virtual network. Therefore, the last command will fail if an adapter is already associated with the specified virtual network. To add a new adapter to the virtual network, you must first remove the existing host adapter.

Example 2: Add a physical host network adapter to a VLAN that uses "Trunk" mode

PS C:\> $VMHost = Get-SCVMHost -ComputerName "VMHost02"
PS C:\> $VirtualNetwork = Get-SCVirtualNetwork -VMHost $VMHost -Name "ExternalNetwork02"
PS C:\> $VMHostNetworkAdapter = Get-SCVMHostNetworkAdapter -VMHost $VMHost -Name "HostAdapter02"
PS C:\> Add-SCVMHostNetworkAdapter -VirtualNetwork $VirtualNetwork -VMHostNetworkAdapter $VMHostNetworkAdapter -VLANEnabled -VLANMode "Trunk" -VLANTrunkID 1,2,100,200,1124

The first command gets the host object named VMHost02 and stores the object in the $VMHost variable.

The second command gets the virtual network object named ExternalNetwork02 on VMHost02 and stores the object in the $VirtualNetwork variable.

The third command gets the network adapter object named HostAdapter02 on VMHost02 and stores the adapter object in the $VMHostNetworkAdapter variable.

The last command adds HostAdapter02 to virtual network ExternalNetwork02 and enables access from ExternalNetwork02 to an external networking device using 802.1Q tagged VLANs 1, 2, 100, 200, and 1124.

Note: You can add only one host adapter per virtual network, so the last command will fail if an adapter is already associated with the specified virtual network.

Example 3: Add a physical host network adapter to a VLAN that uses "Access" mode

PS C:\> $VMHost = Get-SCVMHost -ComputerName "VMHost03.Contoso.com"
PS C:\> $VirtualNetwork = Get-SCVirtualNetwork -VMHost $VMHost -Name "ExternalVirtualNetwork03"
PS C:\> $VMHostNetworkAdapter = Get-SCVMHostNetworkAdapter -VMHost $VMHost -Name "HostAdapter03"
PS C:\> Add-SCVMHostNetworkAdapter -VirtualNetwork $VirtualNetwork -VMHostNetworkAdapter $VMHostNetworkAdapter -VLanEnabled -VLanMode "Access" -VLanID 22

The first command gets the host object named VMHost03 and stores the object in the $VMHost variable.

The second command gets the virtual network object named ExternalNetwork03 on VMHost03 and stores the object in the $VirtualNetwork variable.

The third command gets the network adapter object named HostAdapter03 on VMHost03 and stores the adapter object in the$VMHostNetworkAdapter variable.

The last command adds HostAdapter03 to virtual network ExternalNetwork03 and restricts access to ExternalNetwork03 to VLANID 22.

Note: You can add only one host adapter per virtual network, so the last command will fail if an adapter is already associated with the specified virtual network.

Caution: This example assumes that that your host is already connected to a VLAN or, if not, ensure that your host has two network adapters. If your host has a single network adapter, assigning the adapter to a VLAN that is unavailable to the VMM server will prevent VMM from managing the host. You can perform the steps in this example on a host that has only one network adapter if you first install the Microsoft Loopback Adapter on your server.

Parameters

-JobGroup

Specifies an identifier for a series of commands that will run as a set just before the final command that includes the same job group identifier runs.

Parameter properties

Type:Guid
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-JobVariable

Specifies that job progress is tracked and stored in the variable named by this parameter.

Parameter properties

Type:String
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-PROTipID

Specifies the ID of the Performance and Resource Optimization tip (PRO tip) that triggered this action. This parameter lets you audit PRO tips.

Parameter properties

Type:Guid
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-RunAsynchronously

Indicates that the job runs asynchronously so that control returns to the command shell immediately.

Parameter properties

Type:SwitchParameter
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-VirtualNetwork

Specifies a virtual network object.

Parameter properties

Type:VirtualNetwork
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:True
Value from pipeline:True
Value from pipeline by property name:False
Value from remaining arguments:False

-VLanEnabled

Enables a virtual LAN (VLAN) for use by virtual machines on a Hyper-V or Citrix XenServer host.

Example format for a single VLAN: -VLANEnabled -VLANMode "Access" -VLANID 35 Example format for multiple VLANs: -VLANEnabled -VLANMode "Trunk" -VLANTrunkID 1,2,100,200,1124

Parameter properties

Type:SwitchParameter
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-VLanID

Assigns a numerical identifier in the range 1-4094 to a virtual network adapter on a virtual machine or to a physical network adapter on a virtual machine host.

Configure a VLanID on a Hyper-V, VMware ESX, or Citrix XenServer host:

-- On an externally bound physical network adapter when the VLan mode is Access.

Configure a VLanID on a virtual network adapter of a virtual machine:

  • Bound to a physical network adapter on the host, or
  • Bound to an internal virtual network on the host.

Example format: -VLanEnabled``-VLanMode "Access" -VLANID 35

Parameter properties

Type:UInt16
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-VLanMode

Specifies whether a virtual LAN (VLAN) on a virtual machine host supports traffic across a single VLAN (Access mode) or across multiple VLANs (Trunk mode). Valid values are: Access, Trunk.

Parameter properties

Type:VlanMode
Default value:None
Accepted values:Access, Trunk, Invalid
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-VLanTrunkID

Assigns a list of numerical identifiers in the range 1-4094 to a physical network adapter on a Hyper-V host.

Example format: -VLANEnabled -VLANMode "Trunk" -VLANTrunkID 1,2,100,200,1124

Parameter properties

Type:

UInt16[]

Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-VMHostNetworkAdapter

Specifies a physical network adapter object on a host to which virtual machines deployed on that host can connect.

Example format: -VMHostNetworkAdapter $VMHostNIC

Parameter properties

Type:HostNetworkAdapter
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:0
Mandatory:True
Value from pipeline:True
Value from pipeline by property name:False
Value from remaining arguments:False

CommonParameters

This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.

Outputs

VMHostNetworkAdapter

This cmdlet returns a VMHostNetworkAdapter object.