Editar

Approved Verbs for PowerShell Commands

  • Artículo

PowerShell uses a verb-noun pair for the names of cmdlets and for their derived .NET classes. The verb part of the name identifies the action that the cmdlet performs. The noun part of the name identifies the entity on which the action is performed. For example, the Get-Command cmdlet retrieves all the commands that are registered in PowerShell.

Note

PowerShell uses the term verb to describe a word that implies an action even if that word is not a standard verb in the English language. For example, the term New is a valid PowerShell verb name because it implies an action even though it is not a verb in the English language.

Each approved verb has a corresponding alias prefix defined. We use this alias prefix in aliases for commands using that verb. For example, the alias prefix for Import is ip and, accordingly, the alias for Import-Module is ipmo. This is a recommendation but not a rule; in particular, it need not be respected for command aliases mimicking well known commands from other environments.

Verb Naming Recommendations

The following recommendations help you choose an appropriate verb for your cmdlet, to ensure consistency between the cmdlets that you create, the cmdlets that are provided by PowerShell, and the cmdlets that are designed by others.

  • Use one of the predefined verb names provided by PowerShell
  • Use the verb to describe the general scope of the action, and use parameters to further refine the action of the cmdlet.
  • Do not use a synonym of an approved verb. For example, always use Remove, never use Delete or Eliminate.
  • Use only the form of each verb that is listed in this topic. For example, use Get, but do not use Getting or Gets.
  • Do not use the following reserved verbs or aliases. The PowerShell language and a rare few cmdlets use these verbs under exceptional circumstances.
    • ForEach (foreach)
    • Ping (pi)
    • Sort (sr)
    • Tee (te)
    • Where (wh)

You may get a complete list of verbs using the Get-Verb cmdlet.

Similar Verbs for Different Actions

The following similar verbs represent different actions.

New vs. Add

Use the New verb to create a new resource. Use the Add to add something to an existing container or resource. For example, Add-Content adds output to an existing file.

New vs. Set

Use the New verb to create a new resource. Use the Set verb to modify an existing resource, optionally creating it if it does not exist, such as the Set-Variable cmdlet.

Use the Find verb to look for an object. Use the Search verb to create a reference to a resource in a container.

Get vs. Read

Use the Get verb to obtain information about a resource (such as a file) or to obtain an object with which you can access the resource in future. Use the Read verb to open a resource and extract information contained within.

Invoke vs. Start

Use the Invoke verb to perform synchronous operations, such as running a command and waiting for it to end. Use the Start verb to begin asynchronous operations, such as starting an autonomous process.

Ping vs. Test

Use the Test verb.

Common Verbs

PowerShell uses the System.Management.Automation.VerbsCommon enumeration class to define generic actions that can apply to almost any cmdlet. The following table lists most of the defined verbs.

Verb (alias) Action Synonyms to avoid
Add (a) Adds a resource to a container, or attaches an item to another item. For example, the Add-Content cmdlet adds content to a file. This verb is paired with Remove. Append, Attach, Concatenate, Insert
Clear (cl) Removes all the resources from a container but does not delete the container. For example, the Clear-Content cmdlet removes the contents of a file but does not delete the file. Flush, Erase, Release, Unmark, Unset, Nullify
Close (cs) Changes the state of a resource to make it inaccessible, unavailable, or unusable. This verb is paired with Open.
Copy (cp) Copies a resource to another name or to another container. For example, the Copy-Item cmdlet copies an item (such as a file) from one location in the data store to another location. Duplicate, Clone, Replicate, Sync
Enter (et) Specifies an action that allows the user to move into a resource. For example, the Enter-PSSession cmdlet places the user in an interactive session. This verb is paired with Exit. Push, Into
Exit (ex) Sets the current environment or context to the most recently used context. For example, the Exit-PSSession cmdlet places the user in the session that was used to start the interactive session. This verb is paired with Enter. Pop, Out
Find (fd) Looks for an object in a container that is unknown, implied, optional, or specified. Search
Format (f) Arranges objects in a specified form or layout
Get (g) Specifies an action that retrieves a resource. This verb is paired with Set. Read, Open, Cat, Type, Dir, Obtain, Dump, Acquire, Examine, Find, Search
Hide (h) Makes a resource undetectable. For example, a cmdlet whose name includes the Hide verb might conceal a service from a user. This verb is paired with Show. Block
Join (j) Combines resources into one resource. For example, the Join-Path cmdlet combines a path with one of its child paths to create a single path. This verb is paired with Split. Combine, Unite, Connect, Associate
Lock (lk) Secures a resource. This verb is paired with Unlock. Restrict, Secure
Move (m) Moves a resource from one location to another. For example, the Move-Item cmdlet moves an item from one location in the data store to another location. Transfer, Name, Migrate
New (n) Creates a resource. (The Set verb can also be used when creating a resource that includes data, such as the Set-Variable cmdlet.) Create, Generate, Build, Make, Allocate
Open (op) Changes the state of a resource to make it accessible, available, or usable. This verb is paired with Close.
Optimize (om) Increases the effectiveness of a resource.
Pop (pop) Removes an item from the top of a stack. For example, the Pop-Location cmdlet changes the current location to the location that was most recently pushed onto the stack.
Push (pu) Adds an item to the top of a stack. For example, the Push-Location cmdlet pushes the current location onto the stack.
Redo (re) Resets a resource to the state that was undone.
Remove (r) Deletes a resource from a container. For example, the Remove-Variable cmdlet deletes a variable and its value. This verb is paired with Add. Clear, Cut, Dispose, Discard, Erase
Rename (rn) Changes the name of a resource. For example, the Rename-Item cmdlet, which is used to access stored data, changes the name of an item in the data store. Change
Reset (rs) Sets a resource back to its original state.
Resize(rz) Changes the size of a resource.
Search (sr) Creates a reference to a resource in a container. Find, Locate
Select (sc) Locates a resource in a container. For example, the Select-String cmdlet finds text in strings and files. Find, Locate
Set (s) Replaces data on an existing resource or creates a resource that contains some data. For example, the Set-Date cmdlet changes the system time on the local computer. (The New verb can also be used to create a resource.) This verb is paired with Get. Write, Reset, Assign, Configure
Show (sh) Makes a resource visible to the user. This verb is paired with Hide. Display, Produce
Skip (sk) Bypasses one or more resources or points in a sequence. Bypass, Jump
Split (sl) Separates parts of a resource. For example, the Split-Path cmdlet returns different parts of a path. This verb is paired with Join. Separate
Step (st) Moves to the next point or resource in a sequence.
Switch (sw) Specifies an action that alternates between two resources, such as to change between two locations, responsibilities, or states.
Undo (un) Sets a resource to its previous state.
Unlock (uk) Releases a resource that was locked. This verb is paired with Lock. Release, Unrestrict, Unsecure
Watch (wc) Continually inspects or monitors a resource for changes.

Communications Verbs

PowerShell uses the System.Management.Automation.VerbsCommunications class to define actions that apply to communications. The following table lists most of the defined verbs.

Verb (alias) Action Synonyms to avoid
Connect (cc) Creates a link between a source and a destination. This verb is paired with Disconnect. Join, Telnet, Login
Disconnect (dc) Breaks the link between a source and a destination. This verb is paired with Connect. Break, Logoff
Read (rd) Acquires information from a source. This verb is paired with Write. Acquire, Prompt, Get
Receive (rc) Accepts information sent from a source. This verb is paired with Send. Read, Accept, Peek
Send (sd) Delivers information to a destination. This verb is paired with Receive. Put, Broadcast, Mail, Fax
Write (wr) Adds information to a target. This verb is paired with Read. Put, Print

Data Verbs

PowerShell uses the System.Management.Automation.VerbsData class to define actions that apply to data handling. The following table lists most of the defined verbs.

Verb Name (alias) Action Synonyms to avoid
Backup (ba) Stores data by replicating it. Save, Burn, Replicate, Sync
Checkpoint (ch) Creates a snapshot of the current state of the data or of its configuration. Diff
Compare (cr) Evaluates the data from one resource against the data from another resource. Diff
Compress (cm) Compacts the data of a resource. Pairs with Expand. Compact
Convert (cv) Changes the data from one representation to another when the cmdlet supports bidirectional conversion or when the cmdlet supports conversion between multiple data types. Change, Resize, Resample
ConvertFrom (cf) Converts one primary type of input (the cmdlet noun indicates the input) to one or more supported output types. Export, Output, Out
ConvertTo (ct) Converts from one or more types of input to a primary output type (the cmdlet noun indicates the output type). Import, Input, In
Dismount (dm) Detaches a named entity from a location. This verb is paired with Mount. Unmount, Unlink
Edit (ed) Modifies existing data by adding or removing content. Change, Update, Modify
Expand (en) Restores the data of a resource that has been compressed to its original state. This verb is paired with Compress. Explode, Uncompress
Export (ep) Encapsulates the primary input into a persistent data store, such as a file, or into an interchange format. This verb is paired with Import. Extract, Backup
Group (gp) Arranges or associates one or more resources
Import (ip) Creates a resource from data that is stored in a persistent data store (such as a file) or in an interchange format. For example, the Import-CSV cmdlet imports data from a comma-separated value (CSV) file to objects that can be used by other cmdlets. This verb is paired with Export. BulkLoad, Load
Initialize (in) Prepares a resource for use, and sets it to a default state. Erase, Init, Renew, Rebuild, Reinitialize, Setup
Limit (l) Applies constraints to a resource. Quota
Merge (mg) Creates a single resource from multiple resources. Combine, Join
Mount (mt) Attaches a named entity to a location. This verb is paired with Dismount. Connect
Out (o) Sends data out of the environment. For example, the Out-Printer cmdlet sends data to a printer.
Publish (pb) Makes a resource available to others. This verb is paired with Unpublish. Deploy, Release, Install
Restore (rr) Sets a resource to a predefined state, such as a state set by Checkpoint. For example, the Restore-Computer cmdlet starts a system restore on the local computer. Repair, Return, Undo, Fix
Save (sv) Preserves data to avoid loss.
Sync (sy) Assures that two or more resources are in the same state. Replicate, Coerce, Match
Unpublish (ub) Makes a resource unavailable to others. This verb is paired with Publish. Uninstall, Revert, Hide
Update (ud) Brings a resource up-to-date to maintain its state, accuracy, conformance, or compliance. For example, the Update-FormatData cmdlet updates and adds formatting files to the current PowerShell console. Refresh, Renew, Recalculate, Re-index

Diagnostic Verbs

PowerShell uses the System.Management.Automation.VerbsDiagnostic class to define actions that apply to diagnostics. The following table lists most of the defined verbs.

Verb (alias) Action Synonyms to avoid
Debug (db) Examines a resource to diagnose operational problems. Diagnose
Measure (ms) Identifies resources that are consumed by a specified operation, or retrieves statistics about a resource. Calculate, Determine, Analyze
Ping (pi) Deprecated - Use the Test verb instead.
Repair (rp) Restores a resource to a usable condition Fix, Restore
Resolve (rv) Maps a shorthand representation of a resource to a more complete representation. Expand, Determine
Test (t) Verifies the operation or consistency of a resource. Diagnose, Analyze, Salvage, Verify
Trace (tr) Tracks the activities of a resource. Track, Follow, Inspect, Dig

Lifecycle Verbs

PowerShell uses the System.Management.Automation.VerbsLifeCycle class to define actions that apply to the lifecycle of a resource. The following table lists most of the defined verbs.

Verb (alias) Action Synonyms to avoid
Approve (ap) Confirms or agrees to the status of a resource or process.
Assert (as) Affirms the state of a resource. Certify
Build (bd) Creates an artifact (usually a binary or document) out of some set of input files (usually source code or declarative documents.) This verb was added in PowerShell 6.
Complete (cp) Concludes an operation.
Confirm (cn) Acknowledges, verifies, or validates the state of a resource or process. Acknowledge, Agree, Certify, Validate, Verify
Deny (dn) Refuses, objects, blocks, or opposes the state of a resource or process. Block, Object, Refuse, Reject
Deploy (dp) Sends an application, website, or solution to a remote target[s] in such a way that a consumer of that solution can access it after deployment is complete. This verb was added in PowerShell 6.
Disable (d) Configures a resource to an unavailable or inactive state. For example, the Disable-PSBreakpoint cmdlet makes a breakpoint inactive. This verb is paired with Enable. Halt, Hide
Enable (e) Configures a resource to an available or active state. For example, the Enable-PSBreakpoint cmdlet makes a breakpoint active. This verb is paired with Disable. Start, Begin
Install (is) Places a resource in a location, and optionally initializes it. This verb is paired with Uninstall. Setup
Invoke (i) Performs an action, such as running a command or a method. Run, Start
Register (rg) Creates an entry for a resource in a repository such as a database. This verb is paired with Unregister.
Request (rq) Asks for a resource or asks for permissions.
Restart (rt) Stops an operation and then starts it again. For example, the Restart-Service cmdlet stops and then starts a service. Recycle
Resume (ru) Starts an operation that has been suspended. For example, the Resume-Service cmdlet starts a service that has been suspended. This verb is paired with Suspend.
Start (sa) Initiates an operation. For example, the Start-Service cmdlet starts a service. This verb is paired with Stop. Launch, Initiate, Boot
Stop (sp) Discontinues an activity. This verb is paired with Start. End, Kill, Terminate, Cancel
Submit (sb) Presents a resource for approval. Post
Suspend (ss) Pauses an activity. For example, the Suspend-Service cmdlet pauses a service. This verb is paired with Resume. Pause
Uninstall (us) Removes a resource from an indicated location. This verb is paired with Install.
Unregister (ur) Removes the entry for a resource from a repository. This verb is paired with Register. Remove
Wait (w) Pauses an operation until a specified event occurs. For example, the Wait-Job cmdlet pauses operations until one or more of the background jobs are complete. Sleep, Pause

Security Verbs

PowerShell uses the System.Management.Automation.VerbsSecurity class to define actions that apply to security. The following table lists most of the defined verbs.

Verb (alias) Action Synonyms to avoid
Block (bl) Restricts access to a resource. This verb is paired with Unblock. Prevent, Limit, Deny
Grant (gr) Allows access to a resource. This verb is paired with Revoke. Allow, Enable
Protect (pt) Safeguards a resource from attack or loss. This verb is paired with Unprotect. Encrypt, Safeguard, Seal
Revoke (rk) Specifies an action that does not allow access to a resource. This verb is paired with Grant. Remove, Disable
Unblock (ul) Removes restrictions to a resource. This verb is paired with Block. Clear, Allow
Unprotect (up) Removes safeguards from a resource that were added to prevent it from attack or loss. This verb is paired with Protect. Decrypt, Unseal

Other Verbs

PowerShell uses the System.Management.Automation.VerbsOther class to define canonical verb names that do not fit into a specific verb name category such as the common, communications, data, lifecycle, or security verb names verbs.

Verb (alias) Action Synonyms to avoid
Use (u) Uses or includes a resource to do something.

See Also