MoveToRangeStart Class
Defines the MoveToRangeStart Class.When the object is serialized out as xml, its qualified name is w:moveToRangeStart.
Inheritance Hierarchy
System.Object
DocumentFormat.OpenXml.OpenXmlElement
DocumentFormat.OpenXml.OpenXmlLeafElement
DocumentFormat.OpenXml.Wordprocessing.MoveBookmarkType
DocumentFormat.OpenXml.Wordprocessing.MoveToRangeStart
Namespace: DocumentFormat.OpenXml.Wordprocessing
Assembly: DocumentFormat.OpenXml (in DocumentFormat.OpenXml.dll)
Syntax
'Declaración
Public Class MoveToRangeStart _
Inherits MoveBookmarkType
'Uso
Dim instance As MoveToRangeStart
public class MoveToRangeStart : MoveBookmarkType
Remarks
[ISO/IEC 29500-1 1ª edición]
17.13.2.28 moveToRangeStart (Move Destination Location Container - Start)
This element specifies the start of the region whose move destination contents are part of a single named move. When a move destination is stored as a revision in a WordprocessingML document, two pieces of information shall be stored about that move destination:
A set of pieces of content which were moved - both inline-level content (§17.13.5.25) and paragraphs (§17.13.5.26)
A move destination container (or "bookmark") which specifies that all content within it which marked as a move destination is part of a single named move. The name attribute on the move container links a group of move destination content with the corresponding group of move source content.
This element defines the start of the latter piece of the move revision data - the container. The id attribute on this element shall be used to link this element with the corresponding end of a move destination container in the document.
The following restrictions are applied to the use of this element
If this element occurs without a corresponding moveToRangeEnd element (§17.13.5.27) with a matching id attribute value, then the document is non-conformant.
If this element and its paired end occur without a matching move source container (§17.13.5.24; §17.13.5.23), then the document is non-conformant.
If multiple start elements exist with the same id attribute value, then the document is non-conformant.
If multiple move destination containers surround the same text, the document is non-conformant.
[Example: Consider a WordprocessingML document in which the first paragraph contains two sentences, and the first sentence is moved before the second sentence, and this move is tracked as a revision, as follows (in this image, green underline indicates the move destination and the green strikethrough indicates the move source location):
.jpg "DocumentFormat.OpenXml.Wordprocessing.MoveToRangeS")
This document has the sentence Some moved text. moved to the first sentence in the document. This revision is represented using the following WordprocessingML:
<w:p>
<w:moveToRangeStart w:id="0" … w:name="move1" />
<w:moveTo w:id="1" … >
<w:r>
<w:t>Some moved text.</w:t>
</w:r>
</w:moveTo>
<w:moveToRangeEnd w:id="0" />
<w:r>
<w:t xml:space="preserve">Some text.</w:t>
</w:r>
<w:moveFromRangeStart w:id="2" … w:name="move1" />
<w:moveFrom w:id="3" … >
<w:r>
<w:t>Some moved text.</w:t>
</w:r>
</w:moveFrom>
<w:moveFromRangeEnd w:id="2" />
</w:p>
The moveToRangeStart element specifies the start of the move destination container within which all moved content is part of the move named move1. end example]
Parent Elements |
|---|
bdo (§17.3.2.3); body (§17.2.2); comment (§17.13.4.2); customXml (§17.5.1.6); customXml (§17.5.1.4); customXml (§17.5.1.5); customXml (§17.5.1.3); deg (§22.1.2.26); del (§17.13.5.14); den (§22.1.2.28); dir (§17.3.2.8); docPartBody (§17.12.6); e (§22.1.2.32); endnote (§17.11.2); fldSimple (§17.16.19); fName (§22.1.2.37); footnote (§17.11.10); ftr (§17.10.3); hdr (§17.10.4); hyperlink (§17.16.22); ins (§17.13.5.18); lim (§22.1.2.52); moveFrom (§17.13.5.22); moveTo (§17.13.5.25); num (§22.1.2.75); oMath (§22.1.2.77); p (§17.3.1.22); rt (§17.3.3.24); rubyBase (§17.3.3.27); sdtContent (§17.5.2.34); sdtContent (§17.5.2.33); sdtContent (§17.5.2.35); sdtContent (§17.5.2.36); smartTag (§17.5.1.9); sub (§22.1.2.112); sup (§22.1.2.114); tbl (§17.4.38); tc (§17.4.66); tr (§17.4.79) |
Attributes |
Description |
|---|---|
author (Annotation Author) |
Specifies the author for an annotation within a WordprocessingML document. If this attribute is omitted, then no author shall be associated with the parent annotation type. [Example: Consider a comment represented using the following WordprocessingML fragment: The author attribute specifies that the author of the current annotation is Example Author, which can be used as desired. end example] The possible values for this attribute are defined by the ST_String simple type (§22.9.2.13). |
colFirst (First Table Column Covered By Bookmark) |
Specifies the zero-based index of the first column in this row which shall be part of this bookmark. When a bookmark is contained within a table, it is possible for that bookmark to only cover cells within a certain column and row range within that table, by specifying:
If this attribute appears, then the colLast attribute shall also appear (regardless of where this bookmark is located) or the document shall be considered non-conformant. If this attibute and its pair occur on a bookmark which is not contained in a table, then their values should be ignored. If this value exceeds the value of colLast or the number of columns in the table, then both values should be ignored. [Example: Consider a three row by three column table where a table bookmark must be applied to the contents of the first two cells in the first two rows in the table (the cells shaded below): This bookmark would be specified using the following WordprocessingML for the table's conents: The colFirst attribute specifies that all columns starting with the first column must be included in the table bookmark. This applies starting with the first row and ending with the second row (the two rows within the bookmark's start and end). end example] The possible values for this attribute are defined by the ST_DecimalNumber simple type (§17.18.10). |
colLast (Last Table Column Covered By Bookmark) |
Specifies the zero-based index of the last column in this row which shall be part of this bookmark. When a bookmark is contained within a table, it is possible for that bookmark to only cover cells within a certain column and row range within that table, by specifying:
If this attribute appears, then the colFirst attribute shall also appear (regardless of where this bookmark is located) or the document shall be considered non-conformant. If this attibute and its pair occur on a bookmark which is not contained in a table, then their values should be ignored. If this value does not equal or exceed the value of colFirst or the number of columns in the table, then both values should be ignored. [Example: Consider a three row by three column table where a table bookmark shall be applied to the contents of the first two cells in the first two rows in the table (the cells shaded below): This bookmark would be specified using the following WordprocessingML for the table's conents: The colLast attribute specifies that the last column that shall be included in the table bookmark is the second column. This applies starting with the first row and ending with the second row (the two rows within the bookmark's start and end). end example] The possible values for this attribute are defined by the ST_DecimalNumber simple type (§17.18.10). |
date (Annotation Date) |
Specifies the date information for an annotation within a WordprocessingML document. The use of this information is outside of the scope of ISO/IEC 29500. If this attribute is omitted, then no date information shall be associated with the parent annotation type. [Example: Consider a comment represented using the following WordprocessingML fragment: The date attribute specifies that the date of the current annotation is January 1st 2006 at 10:00 AM, which can be used as desired. end example] The possible values for this attribute are defined by the ST_DateTime simple type (§17.18.9). |
displacedByCustomXml (Annotation Marker Relocated For Custom XML Markup) |
Specifies that the parent annotation's placement shall be directly linked with the location of the physical presentation of a custom XML element in the document. This element only has an effect when the custom XML element is block-level (i.e. surrounds an entire paragraph), as in this scenario the logical and physical placement of the annotation and custom XML element can differ. Specifically, in this case, the custom XML is presented *around* the block-level object it encloses (the paragraph, table, table row, or table cell), but is physically represented within that same object (i.e. within the paragraph, table, table row or table cell). This requirement stems from the fact that there is no location for the location of the annotation within the document at its logical location (around a table, for example). If this element is omitted, then the annotation shall be anchored inside of all block-level custom XML elements in the paragraph. If this element is present, but no block-level custom XML tag is located at the position it specifies (before or after), then it shall be ignored. [Example: Consider a paragraph with block level custom XML markup and two comment anchor annotations (one before and one after the custom XML element's physical representation), as follows: .jpg "DocumentFormat.OpenXml.Wordprocessing.MoveToRangeS")
Since all three of these items are around the entire paragraph, they are stored outside of the paragraph. However, in order to ensure that their relative positions are stored correctly, any annotation which must be displaced by the physical custom XML element specifies this information, resulting in the following WordprocessingML: The displacedByCustomXml attribute specifies that even though all three of these items are around the paragraph and is moved inside the paragraph to be represented physically, the comment with ID 0 must be inside the custom XML, but the comment with ID 1 must be displaced to stay outside of the relative location of the next custom XML element (the spec element). end example] The possible values for this attribute are defined by the ST_DisplacedByCustomXml simple type (§17.18.13). |
id (Annotation Identifier) |
Specifies a unique identifier for an annotation within a WordprocessingML document. The restrictions on the id attribute, if any, are defined by the parent XML element. If this attribute is omitted, then the document is non-conformant. [Example: Consider an annotation represented using the following WordprocessingML fragment: The id attribute specifies that the ID of the current annotation is 1. This value is used to uniquely identify this annotation within the document content. end example] The possible values for this attribute are defined by the ST_DecimalNumber simple type (§17.18.10). |
name (Bookmark Name) |
Specifies the bookmark name. If multiple bookmarks in a document share the same name, then the first bookmark (defined by the location of the bookmarkStart element in document order) shall be maintained, and all subsequent bookmarks should be ignored. [Example: Consider the following XML for a bookmark around a single word: The name attribute specifies that the name for this bookmark is place. end example] The possible values for this attribute are defined by the ST_String simple type (§22.9.2.13). |
[Note: The W3C XML Schema definition of this element's content model (CT_MoveBookmark) is located in §A.1. end note]
© ISO/IEC29500: 2008. Los extractos anteriores han sido traducidos del inglés al español por Microsoft (o algunos de sus agentes) e ISO no asume ningún tipo de responsabilidad por dichas traducciones.
Thread Safety
Any public static (Shared in Visual Basic) members of this type are thread safe. Any instance members are not guaranteed to be thread safe.