Compartir a través de


Cómo crear una publicación (programación con RMO)

Puede crear publicaciones mediante programación con Objetos de administración de replicación (RMO). Las clases RMO que usa para crear una publicación dependen del tipo de publicación que crea.

Nota de seguridadNota de seguridad

Cuando sea posible, pida a los usuarios que proporcionen credenciales de seguridad en tiempo de ejecución. Si debe almacenar credenciales, use los servicios de cifrado proporcionados por Microsoft Windows .NET Framework.

Para crear una publicación transaccional o de instantáneas

  1. Cree una conexión al publicador mediante la clase ServerConnection.

  2. Cree una instancia de la clase ReplicationDatabase para la base de datos de publicación, establezca la propiedad ConnectionContext en la instancia de ServerConnection del paso 1 y llame al método LoadProperties. Si LoadProperties devuelve false, compruebe que la base de datos existe.

  3. Si la propiedad EnabledTransPublishing es false, establézcala en true.

  4. Para una publicación transaccional, compruebe el valor de la propiedad LogReaderAgentExists. Si esta propiedad es true, un trabajo del Agente de registro del LOG ya existe para esta base de datos. Si esta propiedad es false, haga lo siguiente:

  5. Cree una instancia de la clase TransPublication y establezca las propiedades siguientes para este objeto:

  6. Llame al método Create para crear la publicación.

    Nota de seguridadNota de seguridad

     Cuando se configura un Publicador con un Distribuidor remoto, los valores suministrados para todas las propiedades, incluidos SnapshotGenerationAgentProcessSecurity, se envían al Distribuidor como texto simple. Debe cifrar la conexión entre el Publicador y su Distribuidor remoto antes de llamar al método Create. Para obtener más información, vea Cifrar conexiones a SQL Server.

  7. Llame al método CreateSnapshotAgent para crear el trabajo del Agente de instantáneas para la publicación.

Para crear una publicación de mezcla

  1. Cree una conexión al Publicador mediante la clase ServerConnection.

  2. Cree una instancia de la clase ReplicationDatabase para la base de datos de publicación, establezca la propiedad ConnectionContext en la instancia de ServerConnection del paso 1 y llame al método LoadProperties. Si LoadProperties devuelve false, compruebe que la base de datos existe.

  3. Si la propiedad EnabledMergePublishing es false, establézcala en true y llame a CommitPropertyChanges.

  4. Cree una instancia de la clase MergePublication y establezca las propiedades siguientes para este objeto:

  5. Llame al método Create para crear la publicación.

    Nota de seguridadNota de seguridad

     Cuando se configura un Publicador con un Distribuidor remoto, los valores suministrados para todas las propiedades, incluidos SnapshotGenerationAgentProcessSecurity, se envían al Distribuidor como texto simple. Debe cifrar la conexión entre el Publicador y su Distribuidor remoto antes de llamar al método Create. Para obtener más información, vea Cifrar conexiones a SQL Server.

  6. Llame al método CreateSnapshotAgent para crear el trabajo del Agente de instantáneas para la publicación.

Ejemplo

Este ejemplo habilita la base de datos de AdventureWorks para la publicación transaccional, define un trabajo del Agente de registro del LOG y crea la publicación de AdvWorksProductTran. Se debe definir un artículo para esta publicación. Las credenciales de cuenta de Windows que se necesitan para crear el trabajo del Agente de registro del LOG y el trabajo del Agente de instantáneas se pasan en tiempo de ejecución. Para obtener información sobre cómo usar RMO para definir artículos de instantáneas y de transacciones, vea Cómo definir un artículo (programación con RMO).

           // Set the Publisher, publication database, and publication names.
            string publicationName = "AdvWorksProductTran";
            string publicationDbName = "AdventureWorks";
            string publisherName = publisherInstance;

            ReplicationDatabase publicationDb;
            TransPublication publication;

            // Create a connection to the Publisher using Windows Authentication.
            ServerConnection conn;
            conn = new ServerConnection(publisherName);


            try
            {
                // Connect to the Publisher.
                conn.Connect();

                // Enable the AdventureWorks database for transactional publishing.
                publicationDb = new ReplicationDatabase(publicationDbName, conn);

                // If the database exists and is not already enabled, 
                // enable it for transactional publishing.
                if (publicationDb.LoadProperties())
                {
                    if (!publicationDb.EnabledTransPublishing)
                    {
                        publicationDb.EnabledTransPublishing = true;
                    }

                    // If the Log Reader Agent does not exist, create it.
                    if (!publicationDb.LogReaderAgentExists)
                    {
                        // Specify the Windows account under which the agent job runs.
                        // This account will be used for the local connection to the 
                        // Distributor and all agent connections that use Windows Authentication.
                        publicationDb.LogReaderAgentProcessSecurity.Login = winLogin;
                        publicationDb.LogReaderAgentProcessSecurity.Password = winPassword;

                        // Explicitly set authentication mode for the Publisher connection
                        // to the default value of Windows Authentication.
                        publicationDb.LogReaderAgentPublisherSecurity.WindowsAuthentication = true;

                        // Create the Log Reader Agent job.
                        publicationDb.CreateLogReaderAgent();
                    }
                }
                else
                {
                    throw new ApplicationException(String.Format(
                        "The {0} database does not exist at {1}.",
                        publicationDb, publisherName));
                }

                // Set the required properties for the transactional publication.
                publication = new TransPublication();
                publication.ConnectionContext = conn;
                publication.Name = publicationName;
                publication.DatabaseName = publicationDbName;

                // Specify a transactional publication (the default).
                publication.Type = PublicationType.Transactional;

                // Activate the publication so that we can add subscriptions.
                publication.Status = State.Active;

                // Enable push and pull subscriptions and independent Distribition Agents.
                publication.Attributes |= PublicationAttributes.AllowPull;
                publication.Attributes |= PublicationAttributes.AllowPush;
                publication.Attributes |= PublicationAttributes.IndependentAgent;

                // Specify the Windows account under which the Snapshot Agent job runs.
                // This account will be used for the local connection to the 
                // Distributor and all agent connections that use Windows Authentication.
                publication.SnapshotGenerationAgentProcessSecurity.Login = winLogin;
                publication.SnapshotGenerationAgentProcessSecurity.Password = winPassword;

                // Explicitly set the security mode for the Publisher connection
                // Windows Authentication (the default).
                publication.SnapshotGenerationAgentPublisherSecurity.WindowsAuthentication = true;

                if (!publication.IsExistingObject)
                {
                    // Create the transactional publication.
                    publication.Create();

                    // Create a Snapshot Agent job for the publication.
                    publication.CreateSnapshotAgent();
                }
                else
                {
                    throw new ApplicationException(String.Format(
                        "The {0} publication already exists.", publicationName));
                }
            }

            catch (Exception ex)
            {
                // Implement custom application error handling here.
                throw new ApplicationException(String.Format(
                    "The publication {0} could not be created.", publicationName), ex);
            }
            finally
            {
                conn.Disconnect();
            }
' Set the Publisher, publication database, and publication names.
Dim publicationName As String = "AdvWorksProductTran"
Dim publicationDbName As String = "AdventureWorks"
Dim publisherName As String = publisherInstance

Dim publicationDb As ReplicationDatabase
Dim publication As TransPublication

' Create a connection to the Publisher using Windows Authentication.
Dim conn As ServerConnection
conn = New ServerConnection(publisherName)

Try
    ' Connect to the Publisher.
    conn.Connect()

    ' Enable the AdventureWorks database for transactional publishing.
    publicationDb = New ReplicationDatabase(publicationDbName, conn)

    ' If the database exists and is not already enabled, 
    ' enable it for transactional publishing.
    If publicationDb.LoadProperties() Then
        If Not publicationDb.EnabledTransPublishing Then
            publicationDb.EnabledTransPublishing = True
        End If

        ' If the Log Reader Agent does not exist, create it.
        If Not publicationDb.LogReaderAgentExists Then
            ' Specify the Windows account under which the agent job runs.
            ' This account will be used for the local connection to the 
            ' Distributor and all agent connections that use Windows Authentication.
            publicationDb.LogReaderAgentProcessSecurity.Login = winLogin
            publicationDb.LogReaderAgentProcessSecurity.Password = winPassword

            ' Explicitly set authentication mode for the Publisher connection
            ' to the default value of Windows Authentication.
            publicationDb.LogReaderAgentPublisherSecurity.WindowsAuthentication = True

            ' Create the Log Reader Agent job.
            publicationDb.CreateLogReaderAgent()
        End If
    Else
        Throw New ApplicationException(String.Format( _
         "The {0} database does not exist at {1}.", _
         publicationDb, publisherName))
    End If

    ' Set the required properties for the transactional publication.
    publication = New TransPublication()
    publication.ConnectionContext = conn
    publication.Name = publicationName
    publication.DatabaseName = publicationDbName

    ' Specify a transactional publication (the default).
    publication.Type = PublicationType.Transactional

    'Enable push and pull subscriptions and independent Distribition Agents.
    publication.Attributes = _
    publication.Attributes Or PublicationAttributes.AllowPull
    publication.Attributes = _
    publication.Attributes Or PublicationAttributes.AllowPush
    publication.Attributes = _
    publication.Attributes Or PublicationAttributes.IndependentAgent

    ' Activate the publication so that we can add subscriptions.
    publication.Status = State.Active

    ' Specify the Windows account under which the Snapshot Agent job runs.
    ' This account will be used for the local connection to the 
    ' Distributor and all agent connections that use Windows Authentication.
    publication.SnapshotGenerationAgentProcessSecurity.Login = winLogin
    publication.SnapshotGenerationAgentProcessSecurity.Password = winPassword

    ' Explicitly set the security mode for the Publisher connection
    ' Windows Authentication (the default).
    publication.SnapshotGenerationAgentPublisherSecurity.WindowsAuthentication = True

    If Not publication.IsExistingObject Then
        ' Create the transactional publication.
        publication.Create()

        ' Create a Snapshot Agent job for the publication.
        publication.CreateSnapshotAgent()
    Else
        Throw New ApplicationException(String.Format( _
            "The {0} publication already exists.", publicationName))
    End If
Catch ex As Exception
    ' Implement custom application error handling here.
    Throw New ApplicationException(String.Format( _
        "The publication {0} could not be created.", publicationName), ex)
Finally
    conn.Disconnect()
End Try

Este ejemplo habilita la base de datos de AdventureWorks para la publicación de mezcla y crea la publicación de AdvWorksSalesOrdersMerge. Todavía se deben definir artículos para esta publicación. Las credenciales de cuenta de Windows que se necesitan para crear el trabajo del Agente de registro del LOG se pasan en tiempo de ejecución. Para obtener información sobre cómo usar RMO para definir artículos de mezcla, vea Cómo definir un artículo (programación con RMO).

          // Set the Publisher, publication database, and publication names.
            string publisherName = publisherInstance;
            string publicationName = "AdvWorksSalesOrdersMerge";
            string publicationDbName = "AdventureWorks";

            ReplicationDatabase publicationDb;
            MergePublication publication;

            // Create a connection to the Publisher.
            ServerConnection conn = new ServerConnection(publisherName);

            try
            {
                // Connect to the Publisher.
                conn.Connect();

                // Enable the database for merge publication.               
                publicationDb = new ReplicationDatabase(publicationDbName, conn);
                if (publicationDb.LoadProperties())
                {
                    if (!publicationDb.EnabledMergePublishing)
                    {
                        publicationDb.EnabledMergePublishing = true;
                    }
                }
                else
                {
                    // Do something here if the database does not exist. 
                    throw new ApplicationException(String.Format(
                        "The {0} database does not exist on {1}.",
                        publicationDb, publisherName));
                }

                // Set the required properties for the merge publication.
                publication = new MergePublication();
                publication.ConnectionContext = conn;
                publication.Name = publicationName;
                publication.DatabaseName = publicationDbName;

                // Enable precomputed partitions.
                publication.PartitionGroupsOption = PartitionGroupsOption.True;

                // Specify the Windows account under which the Snapshot Agent job runs.
                // This account will be used for the local connection to the 
                // Distributor and all agent connections that use Windows Authentication.
                publication.SnapshotGenerationAgentProcessSecurity.Login = winLogin;
                publication.SnapshotGenerationAgentProcessSecurity.Password = winPassword;

                // Explicitly set the security mode for the Publisher connection
                // Windows Authentication (the default).
                publication.SnapshotGenerationAgentPublisherSecurity.WindowsAuthentication = true;

                // Enable Subscribers to request snapshot generation and filtering.
                publication.Attributes |= PublicationAttributes.AllowSubscriberInitiatedSnapshot;
                publication.Attributes |= PublicationAttributes.DynamicFilters;

                // Enable pull and push subscriptions.
                publication.Attributes |= PublicationAttributes.AllowPull;
                publication.Attributes |= PublicationAttributes.AllowPush;

                if (!publication.IsExistingObject)
                {
                    // Create the merge publication.
                    publication.Create();
                    
                    // Create a Snapshot Agent job for the publication.
                    publication.CreateSnapshotAgent();
                }
                else
                {
                    throw new ApplicationException(String.Format(
                        "The {0} publication already exists.", publicationName));
                }
            }

            catch (Exception ex)
            {
                // Implement custom application error handling here.
                throw new ApplicationException(String.Format(
                    "The publication {0} could not be created.", publicationName), ex);
            }
            finally
            {
                conn.Disconnect();
            }
' Set the Publisher, publication database, and publication names.
Dim publisherName As String = publisherInstance
Dim publicationName As String = "AdvWorksSalesOrdersMerge"
Dim publicationDbName As String = "AdventureWorks"

Dim publicationDb As ReplicationDatabase
Dim publication As MergePublication

' Create a connection to the Publisher.
Dim conn As ServerConnection = New ServerConnection(publisherName)

Try
    ' Connect to the Publisher.
    conn.Connect()

    ' Enable the database for merge publication.                
    publicationDb = New ReplicationDatabase(publicationDbName, conn)
    If publicationDb.LoadProperties() Then
        If Not publicationDb.EnabledMergePublishing Then
            publicationDb.EnabledMergePublishing = True
        End If
    Else
        ' Do something here if the database does not exist. 
        Throw New ApplicationException(String.Format( _
         "The {0} database does not exist on {1}.", _
         publicationDb, publisherName))
    End If

    ' Set the required properties for the merge publication.
    publication = New MergePublication()
    publication.ConnectionContext = conn
    publication.Name = publicationName
    publication.DatabaseName = publicationDbName

    ' Enable precomputed partitions.
    publication.PartitionGroupsOption = PartitionGroupsOption.True

    ' Specify the Windows account under which the Snapshot Agent job runs.
    ' This account will be used for the local connection to the 
    ' Distributor and all agent connections that use Windows Authentication.
    publication.SnapshotGenerationAgentProcessSecurity.Login = winLogin
    publication.SnapshotGenerationAgentProcessSecurity.Password = winPassword

    ' Explicitly set the security mode for the Publisher connection
    ' Windows Authentication (the default).
    publication.SnapshotGenerationAgentPublisherSecurity.WindowsAuthentication = True

    ' Enable Subscribers to request snapshot generation and filtering.
    publication.Attributes = publication.Attributes Or _
        PublicationAttributes.AllowSubscriberInitiatedSnapshot
    publication.Attributes = publication.Attributes Or _
        PublicationAttributes.DynamicFilters

    ' Enable pull and push subscriptions
    publication.Attributes = publication.Attributes Or _
        PublicationAttributes.AllowPull
    publication.Attributes = publication.Attributes Or _
        PublicationAttributes.AllowPush

    If Not publication.IsExistingObject Then
        ' Create the merge publication.
        publication.Create()

        ' Create a Snapshot Agent job for the publication.
        publication.CreateSnapshotAgent()
    Else
        Throw New ApplicationException(String.Format( _
            "The {0} publication already exists.", publicationName))
    End If
Catch ex As Exception
    ' Implement custom application error handling here.
    Throw New ApplicationException(String.Format( _
        "The publication {0} could not be created.", publicationName), ex)
Finally
    conn.Disconnect()
End Try