Cómo eliminar una suscripción de extracción (programación con RMO)
Las suscripciones de extracción se pueden eliminar mediante programación con los objetos de administración de replicación (RMO). Las clases RMO que se usan para eliminar una suscripción de extracción dependen del tipo de publicación a la se suscribe dicha suscripción.
Para eliminar una suscripción de extracción a una publicación transaccional o de instantáneas
Cree conexiones tanto al Suscriptor como al Publicador con la clase ServerConnection.
Cree una instancia de la clase TransPullSubscription y establezca las propiedades PublicationName, DatabaseName, PublisherName y PublicationDBName. Use la conexión del Suscriptor del paso 1 para establecer la propiedad ConnectionContext.
Compruebe la propiedad IsExistingObject para asegurarse de que la suscripción existe. Si el valor de esta propiedad es false, significa que las propiedades de suscripción del paso 2 se definieron incorrectamente o bien, que la suscripción no existe.
Llame al método Remove.
Cree una instancia de la clase TransPublication con la conexión del publicador del paso 1. Especifique Name, DatabaseName y ConnectionContext.
Llame al método LoadProperties. Si este método devuelve false, las propiedades especificadas en el paso 5 son incorrectas o la publicación no existe en el servidor.
Llame al método RemovePullSubscription. Especifique el nombre del Suscriptor y la base de datos de suscripciones para los parámetros subscriberDB y subscriber.
Para eliminar una suscripción de extracción a una publicación de mezcla
Cree conexiones tanto al Suscriptor como al Publicador con la clase ServerConnection.
Cree una instancia de la clase MergePullSubscription y establezca las propiedades PublicationName, DatabaseName, PublisherName y PublicationDBName. Use la conexión del paso 1 para establecer la propiedad ConnectionContext.
Compruebe la propiedad IsExistingObject para asegurarse de que la suscripción existe. Si el valor de esta propiedad es false, significa que las propiedades de suscripción del paso 2 se definieron incorrectamente o bien, que la suscripción no existe.
Llame al método Remove.
Cree una instancia de la clase MergePublication con la conexión del publicador del paso 1. Especifique Name, DatabaseName y ConnectionContext.
Llame al método LoadProperties. Si este método devuelve false, las propiedades especificadas en el paso 5 son incorrectas o la publicación no existe en el servidor.
Llame al método RemovePullSubscription. Especifique el nombre del Suscriptor y la base de datos de suscripciones para los parámetros subscriberDB y subscriber.
Ejemplo
Este ejemplo elimina una suscripción de extracción a una publicación transaccional y quita el registro de suscripciones en el Publicador.
// Define the Publisher, publication, and databases.
string publicationName = "AdvWorksProductTran";
string publisherName = publisherInstance;
string subscriberName = subscriberInstance;
string subscriptionDbName = "AdventureWorksReplica";
string publicationDbName = "AdventureWorks";
//Create connections to the Publisher and Subscriber.
ServerConnection subscriberConn = new ServerConnection(subscriberName);
ServerConnection publisherConn = new ServerConnection(publisherName);
// Create the objects that we need.
TransPublication publication;
TransPullSubscription subscription;
try
{
// Connect to the Subscriber.
subscriberConn.Connect();
// Define the pull subscription.
subscription = new TransPullSubscription();
subscription.ConnectionContext = subscriberConn;
subscription.PublisherName = publisherName;
subscription.PublicationName = publicationName;
subscription.PublicationDBName = publicationDbName;
subscription.DatabaseName = subscriptionDbName;
// Define the publication.
publication = new TransPublication();
publication.Name = publicationName;
publication.DatabaseName = publicationDbName;
publication.ConnectionContext = publisherConn;
// Delete the pull subscription, if it exists.
if (subscription.IsExistingObject)
{
if (publication.LoadProperties())
{
// Remove the pull subscription registration at the Publisher.
publication.RemovePullSubscription(subscriberName, subscriptionDbName);
}
else
{
// Do something here if the publication does not exist.
throw new ApplicationException(String.Format(
"The publication '{0}' does not exist on {1}.",
publicationName, publisherName));
}
// Delete the pull subscription at the Subscriber.
subscription.Remove();
}
else
{
throw new ApplicationException(String.Format(
"The subscription to {0} does not exist on {1}",
publicationName, subscriberName));
}
}
catch (Exception ex)
{
// Implement the appropriate error handling here.
throw new ApplicationException(String.Format(
"The subscription to {0} could not be deleted.", publicationName), ex);
}
finally
{
subscriberConn.Disconnect();
publisherConn.Disconnect();
}
' Define the Publisher, publication, and databases.
Dim publicationName As String = "AdvWorksProductTran"
Dim publisherName As String = publisherInstance
Dim subscriberName As String = subscriberInstance
Dim subscriptionDbName As String = "AdventureWorksReplica"
Dim publicationDbName As String = "AdventureWorks"
'Create connections to the Publisher and Subscriber.
Dim subscriberConn As ServerConnection = New ServerConnection(subscriberName)
Dim publisherConn As ServerConnection = New ServerConnection(publisherName)
' Create the objects that we need.
Dim publication As TransPublication
Dim subscription As TransPullSubscription
Try
' Connect to the Subscriber.
subscriberConn.Connect()
' Define the pull subscription.
subscription = New TransPullSubscription()
subscription.ConnectionContext = subscriberConn
subscription.PublisherName = publisherName
subscription.PublicationName = publicationName
subscription.PublicationDBName = publicationDbName
subscription.DatabaseName = subscriptionDbName
' Define the publication.
publication = New TransPublication()
publication.Name = publicationName
publication.DatabaseName = publicationDbName
publication.ConnectionContext = publisherConn
' Delete the pull subscription, if it exists.
If subscription.IsExistingObject Then
If publication.LoadProperties() Then
' Remove the pull subscription registration at the Publisher.
publication.RemovePullSubscription(subscriberName, subscriptionDbName)
Else
' Do something here if the publication does not exist.
Throw New ApplicationException(String.Format( _
"The publication '{0}' does not exist on {1}.", _
publicationName, publisherName))
End If
' Delete the pull subscription at the Subscriber.
subscription.Remove()
Else
Throw New ApplicationException(String.Format( _
"The subscription to {0} does not exist on {1}", _
publicationName, subscriberName))
End If
Catch ex As Exception
' Implement the appropriate error handling here.
Throw New ApplicationException(String.Format( _
"The subscription to {0} could not be deleted.", publicationName), ex)
Finally
subscriberConn.Disconnect()
publisherConn.Disconnect()
End Try
Este ejemplo elimina una suscripción de extracción a una publicación de mezcla y quita el registro de suscripciones en el Publicador.
// Define the Publisher, publication, and databases.
string publicationName = "AdvWorksSalesOrdersMerge";
string publisherName = publisherInstance;
string subscriberName = subscriberInstance;
string subscriptionDbName = "AdventureWorksReplica";
string publicationDbName = "AdventureWorks";
//Create connections to the Publisher and Subscriber.
ServerConnection subscriberConn = new ServerConnection(subscriberName);
ServerConnection publisherConn = new ServerConnection(publisherName);
// Create the objects that we need.
MergePublication publication;
MergePullSubscription subscription;
try
{
// Connect to the Subscriber.
subscriberConn.Connect();
// Define the pull subscription.
subscription = new MergePullSubscription();
subscription.ConnectionContext = subscriberConn;
subscription.PublisherName = publisherName;
subscription.PublicationName = publicationName;
subscription.PublicationDBName = publicationDbName;
subscription.DatabaseName = subscriptionDbName;
// Define the publication.
publication = new MergePublication();
publication.Name = publicationName;
publication.DatabaseName = publicationDbName;
publication.ConnectionContext = publisherConn;
// Delete the pull subscription, if it exists.
if (subscription.IsExistingObject)
{
// Delete the pull subscription at the Subscriber.
subscription.Remove();
if (publication.LoadProperties())
{
publication.RemovePullSubscription(subscriberName, subscriptionDbName);
}
else
{
// Do something here if the publication does not exist.
throw new ApplicationException(String.Format(
"The publication '{0}' does not exist on {1}.",
publicationName, publisherName));
}
}
else
{
throw new ApplicationException(String.Format(
"The subscription to {0} does not exist on {1}",
publicationName, subscriberName));
}
}
catch (Exception ex)
{
// Implement the appropriate error handling here.
throw new ApplicationException(String.Format(
"The subscription to {0} could not be deleted.", publicationName), ex);
}
finally
{
subscriberConn.Disconnect();
publisherConn.Disconnect();
}
' Define the Publisher, publication, and databases.
Dim publicationName As String = "AdvWorksSalesOrdersMerge"
Dim publisherName As String = publisherInstance
Dim subscriberName As String = subscriberInstance
Dim subscriptionDbName As String = "AdventureWorksReplica"
Dim publicationDbName As String = "AdventureWorks"
'Create connections to the Publisher and Subscriber.
Dim subscriberConn As ServerConnection = New ServerConnection(subscriberName)
Dim publisherConn As ServerConnection = New ServerConnection(publisherName)
' Create the objects that we need.
Dim publication As MergePublication
Dim subscription As MergePullSubscription
Try
' Connect to the Subscriber.
subscriberConn.Connect()
' Define the pull subscription.
subscription = New MergePullSubscription()
subscription.ConnectionContext = subscriberConn
subscription.PublisherName = publisherName
subscription.PublicationName = publicationName
subscription.PublicationDBName = publicationDbName
subscription.DatabaseName = subscriptionDbName
' Define the publication.
publication = New MergePublication()
publication.Name = publicationName
publication.DatabaseName = publicationDbName
publication.ConnectionContext = publisherConn
' Delete the pull subscription, if it exists.
If subscription.IsExistingObject Then
' Delete the pull subscription at the Subscriber.
subscription.Remove()
If publication.LoadProperties() Then
publication.RemovePullSubscription(subscriberName, subscriptionDbName)
Else
' Do something here if the publication does not exist.
Throw New ApplicationException(String.Format( _
"The publication '{0}' does not exist on {1}.", _
publicationName, publisherName))
End If
Else
Throw New ApplicationException(String.Format( _
"The subscription to {0} does not exist on {1}", _
publicationName, subscriberName))
End If
Catch ex As Exception
' Implement the appropriate error handling here.
Throw New ApplicationException(String.Format( _
"The subscription to {0} could not be deleted.", publicationName), ex)
Finally
subscriberConn.Disconnect()
publisherConn.Disconnect()
End Try