Compartir a través de


Nlbmgr

 

Applies To: Windows Server 2003, Windows Vista, Windows XP, Windows Server 2008, Windows 7, Windows Server 2003 R2, Windows Server 2008 R2, Windows Server 2012, Windows 8

Using Network Load Balancing Manager, you can configure and manage your Network Load Balancing clusters and all cluster hosts from a single computer, and you can also replicate the cluster configuration to other hosts. You can start Network Load Balancing Manager from the command-line using the command nlbmgr.exe, which is installed in the systemroot\System32 folder.

Syntax

nlbmgr [/help] [/noping] [/hostlist <filename>] [/autorefresh <interval>]

Parameters

Parameter

Description

/help

Displays help at the command prompt.

/noping

Prevents Network Load Balancing Manager from pinging the hosts prior to trying to contact them through Windows Management Instrumentation (WMI). Use this option if you have disabled Internet Control Message Protocol (ICMP) on all available network adapters. If Network Load Balancing Manager attempts to contact a host that is not available, you will experience a delay when using this option.

/hostlist <filename>

Loads the hosts specified in filename into Network Load Balancing Manager.

/autorefresh <interval>

Causes Network Load Balancing Manager to refresh its host and cluster information every <interval> seconds. If no interval is specified, the information is refreshed every 60 seconds.

/?

Displays Help at the command prompt.

Additional references