Compartir a través de


Scripts de ejemplo del laboratorio de implementación

Copie estos scripts en la raíz de la unidad USB de almacenamiento. Consulte esta página para saber lo que hay en los scripts.

La descarga zip de scripts de ejemplo incluye todos los scripts siguientes:

Scripts de implementación de imágenes

Los siguientes scripts configuran dispositivos Windows mediante un archivo de imagen WIM o FFU y, después, ofrecen la opción de configurar las características de restablecimiento rápido.

Los siguientes archivos componen los scripts de implementación:

  • ApplyImage.bat
  • ApplyRecovery.bat
  • CreatePartitions-BIOS.txt
  • CreatePartitions-BIOS-FFU.txt
  • CreatePartitions-UEFI.txt
  • CreatePartitions-UEFI-FFU.txt
  • HideRecoveryPartitions-BIOS.txt
  • HideRecoveryPartitions-UEFI.txt
  • CreateRecoveryPartitions-BIOS.txt
  • CreateRecoveryPartitions-UEFI.txt

ApplyImage.bat

El uso de este script aplica una imagen de Windows a un nuevo dispositivo.

Nota: Si copia y pega el contenido siguiente para crear un archivo .bat, es posible que aparezca un error al detectar firmware. Para que se pueda llevar a cabo la detección de firmware, asegúrese de que las líneas que comienzan por for /f "tokens=2* delims= " %%A tienen una tabulación, seguida de un espacio entre delims= y " %%A.

@echo Apply-Image.bat
@echo     Run from the reference device in the WinPE environment.
@echo.
@echo     This script erases the primary hard drive and applies a new image.
@echo.
@echo     Make sure that this script is run from the folder that contains the
@echo     supporting scripts
@echo.
@echo UPDATE (November 2017)
@echo * Added support for FFU deployments.  
@echo.
@echo UPDATE (JULY 2016):
@echo * This script stops just after applying the image.
@echo   This gives you an opportunity to add siloed provisioning packages (SPPs)
@echo   so that you can include them in your recovery tools.
@echo.
@echo   After the script is complete, use apply-recovery.bat to finish
@echo   setting up the recovery tools.
@echo.
@echo * This script creates a now includes support for the /EA variables for quicker
@echo   image capture and recovery.
@echo.
@echo * This script now includes support for the /EA variables for quicker
@echo   image capture and recovery.
@echo.
@echo * This script now checks to see if you're booted into Windows PE.
@echo.
@if not exist X:\Windows\System32 echo ERROR: This script is built to run in Windows PE.
@if not exist X:\Windows\System32 goto END
@if %1.==. echo ERROR: To run this script, add a path to a Windows image file.
@if %1.==. echo Example: ApplyImage D:\WindowsWithFrench.wim
@if %1.==. goto END
@echo *********************************************************************
@echo  == Setting high-performance power scheme to speed deployment ==
@call powercfg /s 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c
@echo *********************************************************************
@echo Checking to see the type of image being deployed
@if "%~x1" == ".wim" (GOTO WIM)
@if "%~x1" == ".ffu" (GOTO FFU)
@echo *********************************************************************
@if not "%~x1" == ".ffu". if not "%~x1" == ".wim" echo Please use this script with a WIM or FFU image.
@if not "%~x1" == ".ffu". if not "%~x1" == ".wim" GOTO END
:WIM
@echo Starting WIM Deployment
@echo *********************************************************************
@echo Checking to see if the PC is booted in BIOS or UEFI mode.
wpeutil UpdateBootInfo
for /f "tokens=2* delims=    " %%A in ('reg query HKLM\System\CurrentControlSet\Control /v PEFirmwareType') DO SET Firmware=%%B
@echo            Note: delims is a TAB followed by a space.
@if x%Firmware%==x echo ERROR: Can't figure out which firmware we're on.
@if x%Firmware%==x echo        Common fix: In the command above:
@if x%Firmware%==x echo             for /f "tokens=2* delims=    "
@if x%Firmware%==x echo        ...replace the spaces with a TAB character followed by a space.
@if x%Firmware%==x goto END
@if %Firmware%==0x1 echo The PC is booted in BIOS mode. 
@if %Firmware%==0x2 echo The PC is booted in UEFI mode. 
@echo *********************************************************************
@echo Do you want to create a Recovery partition?
@echo    (If you're going to be working with FFUs, and need 
@echo     to expand the Windows partition after applying the FFU, type N). 
@SET /P RECOVERY=(Y or N):
@if %RECOVERY%.==y. set RECOVERY=Y
@echo Formatting the primary disk...
@if %Firmware%==0x1 echo    ...using BIOS (MBR) format and partitions.
@if %Firmware%==0x2 echo    ...using UEFI (GPT) format and partitions. 
@echo CAUTION: All the data on the disk will be DELETED.
@SET /P READY=Erase all data and continue? (Y or N):
@if %READY%.==y. set READY=Y
@if not %READY%.==Y. goto END
@if %Firmware%.==0x1. if %RECOVERY%.==Y. diskpart /s CreatePartitions-BIOS.txt
@if %Firmware%.==0x1. if not %RECOVERY%.==Y. diskpart /s CreatePartitions-BIOS-FFU.txt
@if %Firmware%.==0x2. if %RECOVERY%.==Y. diskpart /s CreatePartitions-UEFI.txt
@if %Firmware%.==0x2. if not %RECOVERY%.==Y. diskpart /s CreatePartitions-UEFI-FFU.txt
@echo *********************************************************************
@echo  == Apply the image to the Windows partition ==
@SET /P COMPACTOS=Deploy as Compact OS? (Y or N):
@if %COMPACTOS%.==y. set COMPACTOS=Y
@echo Does this image include Extended Attributes?
@echo    (If you're not sure, type N).
@SET /P EA=(Y or N):
@if %EA%.==y. set EA=Y
@if %COMPACTOS%.==Y.     if %EA%.==Y.     dism /Apply-Image /ImageFile:%1 /Index:1 /ApplyDir:W:\ /Compact /EA
@if not %COMPACTOS%.==Y. if %EA%.==Y.     dism /Apply-Image /ImageFile:%1 /Index:1 /ApplyDir:W:\ /EA
@if %COMPACTOS%.==Y.     if not %EA%.==Y. dism /Apply-Image /ImageFile:%1 /Index:1 /ApplyDir:W:\ /Compact
@if not %COMPACTOS%.==Y. if not %EA%.==Y. dism /Apply-Image /ImageFile:%1 /Index:1 /ApplyDir:W:\
@echo *********************************************************************
@echo == Copy boot files to the System partition ==
W:\Windows\System32\bcdboot W:\Windows /s S:
@echo *********************************************************************
@echo   Next steps:
@echo   * Add Windows Classic apps (optional):
@echo       DISM /Apply-SiloedPackage /ImagePath:W:\ 
@echo            /PackagePath:"D:\App1.spp" /PackagePath:"D:\App2.spp"  ...
@echo.
@echo   * Configure the recovery partition with ApplyRecovery.bat
@echo.      
@echo   * Reboot:
@echo       exit
@GOTO END
:FFU
@echo Starting FFU Deployment
@echo list disk > x:\listdisks.txt
@echo exit >> x:\listdisks.txt
@diskpart /s x:\listdisks.txt
@del x:\listdisks.txt
@echo Enter the disk number of the drive where you're going to deploy your FFU (usually 0).
@SET /P DISKNUMBER=(Enter the Disk Number from above):
@echo This will remove all data from disk %DISKNUMBER%. Continue?
@SET /P ERASEALL=(Y or N):
@if %ERASEALL%.==y. set ERASEALL=Y
@if %ERASEALL%==Y DISM /apply-ffu /ImageFile=%1 /ApplyDrive:\\.\PhysicalDrive%DISKNUMBER%
@if not %ERASEALL%==Y GOTO END
@echo FFU applied. Would you like to configure the recovery partition?
@SET /P CONFIGRECOVERY=(Y or N):
@if %CONFIGRECOVERY%.==y. SET CONFIGRECOVERY=Y
@if %CONFIGRECOVERY%==Y ApplyRecovery.bat
@if not %CONFIGRECOVERY%==Y GOTO END
:END

ApplyImage.bat utiliza los siguientes scripts de DiskPart, que deben colocarse en la misma carpeta:

Scripts CreatePartitions

Usa estos scripts junto con DiskPart para formatear y configurar las particiones de disco duro para Windows, incluidas las herramientas de recuperación. Ajusta los tamaños de las particiones para rellenar la unidad según sea necesario.

CreatePartitions-UEFI.txt

Crea las particiones de sistema, MSR, Windows y herramientas de recuperación para PC basados en UEFI.

Este script asigna temporalmente estas letras de unidad: sistema=S, Windows=W y recuperación=R. La partición MSR no recibe ninguna letra. La letra W se usa para evitar posibles conflictos de letras de unidad. Una vez se ha reiniciado el dispositivo, se asigna la letra C a la partición de Windows y las otras particiones no reciben ninguna letra de unidad.

La partición de recuperación debe ser la partición después de la partición Windows para asegurarse de que winre.wim se puede mantener actualizado durante la vida útil del dispositivo.

El siguiente diagrama muestra la configuración de partición resultante:

Diagrama de distribución de partición predeterminado: sistema, MSR, Windows y recuperación

rem == CreatePartitions-UEFI.txt ==
rem == These commands are used with DiskPart to
rem    create four partitions
rem    for a UEFI/GPT-based PC.
rem    Adjust the partition sizes to fill the drive
rem    as necessary. ==
select disk 0
clean
convert gpt
rem == 1. System partition =========================
create partition efi size=100
rem    ** NOTE: For Advanced Format 4Kn drives,
rem               change this value to size = 260 ** 
format quick fs=fat32 label="System"
assign letter="S"
rem == 2. Microsoft Reserved (MSR) partition =======
create partition msr size=16
rem == 3. Windows partition ========================
rem ==    a. Create the Windows partition ==========
create partition primary 
rem ==    b. Create space for the recovery tools ===
rem       ** Update this size to match the size of
rem          the recovery tools (winre.wim)
rem          plus some free space.
shrink minimum=500
rem ==    c. Prepare the Windows partition ========= 
format quick fs=ntfs label="Windows"
assign letter="W"
rem === 4. Recovery partition ======================
create partition primary
format quick fs=ntfs label="Recovery"
assign letter="R"
set id="de94bba4-06d1-4d40-a16a-bfd50179d6ac"
gpt attributes=0x8000000000000001
list volume
exit

CreatePartitions-UEFI-FFU.txt

Este script se basa en CreatePartitions-UEFI.txt, pero no crea una partición de recuperación. Esto es para que la partición de Windows sea la última partición de la unidad y se pueda expandir. Si se usa este script, la partición de recuperación se puede configurar más adelante con ApplyRecovery.bat.

rem == CreatePartitions-UEFI-FFU.txt ==
rem == These commands are used with DiskPart to
rem    create four partitions
rem    for a UEFI/GPT-based PC.
rem    Adjust the partition sizes to fill the drive
rem    as necessary. ==
select disk 0
clean
convert gpt
rem == 1. System partition =========================
create partition efi size=100
rem    ** NOTE: For Advanced Format 4Kn drives,
rem               change this value to size = 260 ** 
format quick fs=fat32 label="System"
assign letter="S"
rem == 2. Microsoft Reserved (MSR) partition =======
create partition msr size=16
rem == 3. Windows partition ========================
rem ==    a. Create the Windows partition ==========
create partition primary 
rem ==    c. Prepare the Windows partition ========= 
format quick fs=ntfs label="Windows"
assign letter="W"
list volume
exit

CreatePartitions-BIOS.txt

Crea las particiones de sistema, Windows y herramientas de recuperación para PC basados en BIOS.

Este script asigna temporalmente estas letras de unidad: sistema=S, Windows=W y recuperación=R. La letra W se usa para evitar posibles conflictos de letras de unidad. Una vez se ha reiniciado el dispositivo, se asigna la letra C a la partición de Windows y las otras particiones no reciben ninguna letra de unidad.

La partición de recuperación debe ser la partición después de la partición Windows para asegurarse de que winre.wim se puede mantener actualizado durante la vida útil del dispositivo.

El siguiente diagrama muestra la configuración de partición resultante:

Diagrama de distribución de partición predeterminado: sistema, Windows y recuperación

rem == CreatePartitions-BIOS.txt ==
rem == These commands are used with DiskPart to
rem    create three partitions
rem    for a BIOS/MBR-based computer.
rem    Adjust the partition sizes to fill the drive
rem    as necessary. ==
select disk 0
clean
rem == 1. System partition ======================
create partition primary size=100
format quick fs=ntfs label="System"
assign letter="S"
active
rem == 2. Windows partition =====================
rem ==    a. Create the Windows partition =======
create partition primary
rem ==    b. Create space for the recovery tools  
rem       ** Update this size to match the size of
rem          the recovery tools (winre.wim)
rem          plus some free space.
shrink minimum=500
rem ==    c. Prepare the Windows partition ====== 
format quick fs=ntfs label="Windows"
assign letter="W"
rem == 3. Recovery partition ====================
create partition primary
format quick fs=ntfs label="Recovery image"
assign letter="R"
set id=27
list volume
exit

CreatePartitions-BIOS-FFU.txt

Este script se basa en CreatePartitions-BIOS.txt, pero no crea una partición de recuperación. Esto es para que la partición de Windows sea la última partición de la unidad y se pueda expandir. Si se usa este script, la partición de recuperación se puede configurar más adelante con ApplyRecovery.bat.

rem == CreatePartitions-BIOS-FFU.txt ==
rem == These commands are used with DiskPart to
rem    create three partitions
rem    for a BIOS/MBR-based computer.
rem    Adjust the partition sizes to fill the drive
rem    as necessary. ==
select disk 0
clean
rem == 1. System partition ======================
create partition primary size=100
format quick fs=ntfs label="System"
assign letter="S"
active
rem == 2. Windows partition =====================
rem ==    a. Create the Windows partition =======
create partition primary
rem ==    c. Prepare the Windows partition ====== 
format quick fs=ntfs label="Windows"
assign letter="W"
list volume
exit

ApplyRecovery.bat

Use este script para preparar la partición de recuperación de Windows. ApplyImage.bat llama a este script, pero también se puede ejecutar por sí mismo.

Nota: Si copia y pega el contenido siguiente para crear un archivo .bat, es posible que aparezca un error al detectar firmware. Para que se pueda llevar a cabo la detección de firmware, asegúrese de que las líneas que comienzan por for /f "tokens=2* delims= " %%A tienen una tabulación, seguida de un espacio entre delims= y " %%A.

@echo == ApplyRecovery.bat ==
@rem *********************************************************************
@echo Checking to see if the PC is booted in BIOS or UEFI mode.
wpeutil UpdateBootInfo
for /f "tokens=2* delims=  " %%A in ('reg query HKLM\System\CurrentControlSet\Control /v PEFirmwareType') DO SET Firmware=%%B
@echo            Note: delims is a TAB followed by a space.
@if x%Firmware%==x echo ERROR: Can't figure out which firmware we're on.
@if x%Firmware%==x echo        Common fix: In the command above:
@if x%Firmware%==x echo             for /f "tokens=2* delims=    "
@if x%Firmware%==x echo        ...replace the spaces with a TAB character followed by a space.
@if x%Firmware%==x goto END
@if %Firmware%==0x1 echo The PC is booted in BIOS mode. 
@if %Firmware%==0x2 echo The PC is booted in UEFI mode. 
@echo  *********************************************************************
@echo Do you already have a recovery partition on this disk? (Y or N):
@SET /P RECOVERYEXIST=(Y or N):
@if %RECOVERYEXIST%.==y. set RECOVERYEXIST=Y
@if %RECOVERYEXIST%.==Y. GOTO COPYTOTOOLSPARTITION
@if not %RECOVERYEXIST%.==Y. GOTO CREATEFFURECOVERY
@echo  *********************************************************************
:COPYTOTOOLSPARTITION
@echo  == Copy the Windows RE image to the Windows RE Tools partition ==
md R:\Recovery\WindowsRE
xcopy /h W:\Windows\System32\Recovery\Winre.wim R:\Recovery\WindowsRE\
@echo  *********************************************************************
@echo  == Register the location of the recovery tools ==
W:\Windows\System32\Reagentc /Setreimage /Path R:\Recovery\WindowsRE /Target W:\Windows
@echo  *********************************************************************
@IF EXIST W:\Recovery\Customizations\USMT.ppkg (GOTO CUSTOMDATAIMAGEWIM) else goto HIDEWIMRECOVERYTOOLS
:CUSTOMDATAIMAGEWIM
@echo  == If Compact OS, single-instance the recovery provisioning package ==
@echo.     
@echo     *Note: this step only works if you created a ScanState package called
@echo      USMT.ppkg as directed in the OEM Deployment lab. If you aren't
@echo      following the steps in the lab, choose N.
@echo.      
@echo     Options: N: No
@echo              Y: Yes
@echo              D: Yes, but defer cleanup steps to first boot.
@echo                 Use this if the cleanup steps take more than 30 minutes.
@echo                 defer the cleanup steps to the first boot.
@SET /P COMPACTOS=Deploy as Compact OS? (Y, N, or D):
@if %COMPACTOS%.==y. set COMPACTOS=Y
@if %COMPACTOS%.==d. set COMPACTOS=D
@if %COMPACTOS%.==Y. dism /Apply-CustomDataImage /CustomDataImage:W:\Recovery\Customizations\USMT.ppkg /ImagePath:W:\ /SingleInstance
@if %COMPACTOS%.==D. dism /Apply-CustomDataImage /CustomDataImage:W:\Recovery\Customizations\USMT.ppkg /ImagePath:W:\ /SingleInstance /Defer
@echo  *********************************************************************
:HIDEWIMRECOVERYTOOLS
@echo == Hiding the recovery tools partition
if %Firmware%==0x1 diskpart /s %~dp0HideRecoveryPartitions-BIOS.txt
if %Firmware%==0x2 diskpart /s %~dp0HideRecoveryPartitions-UEFI.txt
@echo *********************************************************************
@echo == Verify the configuration status of the images. ==
W:\Windows\System32\Reagentc /Info /Target W:\Windows
@echo    (Note: Windows RE status may appear as Disabled, this is OK.)
@echo *********************************************************************
@echo      All done!
@echo      Disconnect the USB drive from the reference device.
@echo      Type exit to reboot.
@echo.
GOTO END
:CREATEFFURECOVERY
@echo *********************************************************************
@echo == Creating the recovery tools partition
@if %Firmware%==0x1 diskpart /s CreateRecoveryPartitions-BIOS.txt
@if %Firmware%==0x2 diskpart /s CreateRecoveryPartitions-UEFI.txt
@echo finding the Windows Drive
@echo  *********************************************************************
@IF EXIST C:\Windows SET windowsdrive=C:\
@IF EXIST D:\Windows SET windowsdrive=D:\
@IF EXIST E:\Windows SET windowsdrive=E:\
@IF EXIST W:\Windows SET windowsdrive=W:\
@echo The Windows drive is %windowsdrive%
md R:\Recovery\WindowsRE
@echo  *********************************************************************
@echo Finding Winre.wim
@IF EXIST %windowsdrive%Recovery\WindowsRE\winre.wim SET recoveryfolder=%windowsdrive%Recovery\WindowsRE\
@IF EXIST %windowsdrive%Windows\System32\Recovery\winre.wim SET recoveryfolder=%windowsdrive%Windows\System32\Recovery\
@echo  *********************************************************************
@echo copying Winre.wim
xcopy /h %recoveryfolder%Winre.wim R:\Recovery\WindowsRE\
@echo  *********************************************************************
@echo  == Register the location of the recovery tools ==
%windowsdrive%Windows\System32\Reagentc /Setreimage /Path R:\Recovery\WindowsRE /Target %windowsdrive%Windows
@echo  *********************************************************************
@IF EXIST W:\Recovery\Customizations\USMT.ppkg (GOTO CUSTOMDATAIMAGEFFU) else goto HIDERECOVERYTOOLSFFU
:CUSTOMDATAIMAGEFFU
@echo  == If Compact OS, single-instance the recovery provisioning package ==
@echo.     
@echo     *Note: this step only works if you created a ScanState package called
@echo      USMT.ppkg as directed in the OEM Deployment lab. If you aren't
@echo      following the steps in the lab, choose N.
@echo.
@echo     Options: N: No
@echo              Y: Yes
@echo              D: Yes, but defer cleanup steps to first boot.
@echo                 Use this if the cleanup steps take more than 30 minutes.
@echo                 defer the cleanup steps to the first boot.
@SET /P COMPACTOS=Deploy as Compact OS? (Y, N, or D):
@if %COMPACTOS%.==y. set COMPACTOS=Y
@if %COMPACTOS%.==d. set COMPACTOS=D
@if %COMPACTOS%.==Y. dism /Apply-CustomDataImage /CustomDataImage:%windowsdrive%Recovery\Customizations\USMT.ppkg /ImagePath:%windowsdrive% /SingleInstance
@if %COMPACTOS%.==D. dism /Apply-CustomDataImage /CustomDataImage:%windowsdrive%Recovery\Customizations\USMT.ppkg /ImagePath:%windowsdrive% /SingleInstance /Defer
:HIDERECOVERYTOOLSFFU
@rem *********************************************************************
@echo == Hiding the recovery tools partition
@if %Firmware%==0x1 diskpart /s HideRecoveryPartitions-BIOS.txt
@if %Firmware%==0x2 diskpart /s HideRecoveryPartitions-UEFI.txt
@echo *********************************************************************
@echo == Verify the configuration status of the images. ==
%windowsdrive%Windows\System32\Reagentc /Info /Target %windowsdrive%Windows
@echo    (Note: Windows RE status may appear as Disabled, this is OK.)
@echo *********************************************************************
@echo      All done!
@echo      Disconnect the USB drive from the reference device.
@echo      Type exit to reboot.
@GOTO END
:END

ApplyRecovery.bat se basa en los siguientes scripts de DiskPart, que deben ponerse en la misma carpeta:

CreateRecoveryPartitions-UEFI.txt

rem == CreateRecoveryPartitions-UEFI.txt ==
rem == Find and label the Windows partition
rem ** This script assumes the partition layout from 
rem    CreatePartitions-UEFI or CreatePartitions-UEFI-FFU
select disk 0
select partition 3
assign letter="W"
rem == Extend the Windows partition 
extend
rem == Create space for the recovery tools  
rem ** Update this size to match the size of
rem    the recovery tools (winre.wim)
rem    plus some free space.
shrink minimum=500
rem == Create recovery partition
create partition primary
format quick fs=ntfs label="Recovery"
assign letter="R"
set id="de94bba4-06d1-4d40-a16a-bfd50179d6ac"
gpt attributes=0x8000000000000001
list volume
exit

CreateRecoveryPartitions-BIOS.txt

rem == CreateRecoveryPartitions-BIOS.txt ==
rem == Find and label the Windows partition
rem ** This script assumes the partition layout from 
rem    CreatePartitions-BIOS or CreatePartitions-BIOS-FFU
select disk 0
select partition 2
assign letter="W"
rem == Extend the Windows partition ==
shrink minimum=500
extend
rem == Create space for the recovery tools  
rem ** Update this size to match the size of the 
rem    recovery tools (winre.wim), plus some free space.
shrink minimum=500
rem == Prepare the recovery partition ====== 
select disk 0
create partition primary
format quick fs=ntfs label="Recovery image"
assign letter="R"
set id=27
list volume
exit

HideRecoveryPartitions-UEFI.txt

rem === HideRecoveryPartitions-UEFI.txt ===
rem ** This script assumes the partition layout from 
rem    CreatePartitions-UEFI or CreatePartitions-UEFI-FFU
select disk 0
select partition 4
set id=de94bba4-06d1-4d40-a16a-bfd50179d6ac
gpt attributes=0x8000000000000001
remove
list volume
exit

HideRecoveryPartitions-BIOS.txt

rem === HideRecoveryPartitions-BIOS.txt ===
rem ** This script assumes the partition layout from 
rem    CreatePartitions-BIOS or CreatePartitions-BIOS-FFU
select disk 0
select partition 3
set id=27
remove
list volume
exit

BootToAudit

Agregue un archivo de respuesta a la imagen de Windows en C:\mount\windows\Windows\Panther\unattend.xml para indicarle que arranque en modo de auditoría. Puedes crear este archivo de respuesta en el Administrador de imágenes de sistema de Windows.

BootToAudit-x64

<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<!-- BootToAudit-x64.xml -->
    <settings pass="oobeSystem">
        <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <Reseal>
                <Mode>Audit</Mode>
            </Reseal>
        </component>
    </settings>
</unattend>

Mantener la configuración de Windows mediante una recuperación

Windows no guarda automáticamente la configuración que se crea a través de los archivos de configuración de unattend.xml, las personalizaciones del menú Inicio de Windows que se crean con LayoutModification.xml durante un restablecimiento de todo el sistema ni la información de primer inicio de sesión de oobe.xml.

Que se guarden las personalizaciones, se incluyen pasos para volver a colocar el los archivos unattend.xml, LayoutModification.xml y oobe.xml en su lugar. Aquí ofrecemos algunos scripts de muestra que te muestran cómo conservar estas opciones de configuración y colocarlas otra vez en las ubicaciones correctas. Guarde copias de unattend.xml, LayoutModification.xml, oobe.xml, además de estos dos archivos de texto: ResetConfig.xml y EnableCustomizations.cmd, en C:\Recovery\OEM\:

ResetConfig.xml

<?xml version="1.0" encoding="utf-8"?>
<!-- ResetConfig.xml -->
<Reset>
  <Run Phase="BasicReset_AfterImageApply">
    <Path>EnableCustomizations.cmd</Path>
    <Duration>2</Duration>
  </Run>
  <Run Phase="FactoryReset_AfterImageApply">
    <Path>EnableCustomizations.cmd</Path>
    <Duration>2</Duration>
  </Run>
</Reset>

EnableCustomizations.cmd

rem EnableCustomizations.cmd

rem Set the variable %TARGETOS%      (Typically this is C:\Windows)
for /F "tokens=1,2,3 delims= " %%A in ('reg query "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\RecoveryEnvironment" /v TargetOS') DO SET TARGETOS=%%C

rem Set the variable %TARGETOSDRIVE% (Typically this is C:)
for /F "tokens=1 delims=\" %%A in ('Echo %TARGETOS%') DO SET TARGETOSDRIVE=%%A

rem Add back Windows settings, Start menu, and OOBE.xml customizations
copy "%TARGETOSDRIVE%\Recovery\OEM\Unattend.xml" "%TARGETOS%\Panther\Unattend.xml" /y
copy "%TARGETOSDRIVE%\Recovery\OEM\LayoutModification.xml" "%TARGETOSDRIVE%\Users\Default\AppData\Local\Microsoft\Windows\Shell\LayoutModification.xml" /y
xcopy "%TARGETOSDRIVE%\Recovery\OEM\OOBE\Info" "%TARGETOS%\System32\Info\" /s

rem Recommended: Create a pagefile for devices with 1GB or less of RAM.
wpeutil CreatePageFile /path=%TARGETOSDRIVE%\PageFile.sys /size=256

Para más información sobre los puntos de extensibilidad de restablecimiento rápido, consulte el tema Agregar scripts de extensibilidad a las características de restablecimiento rápido.

Reinstalar aplicaciones de bandeja de entrada de Windows

Vuelva a instalar las aplicaciones de Windows después de agregar un nuevo idioma. Puede volver a instalar las aplicaciones sin quitarlas primero.

ReinstallInboxApps-x64.cmd

ReinstallInboxApps-x64 es un script de ejemplo para volver a instalar las aplicaciones que vienen con Windows. Esto es solo un ejemplo y no vuelve a instalar necesariamente todas las aplicaciones de bandeja de entrada en el sistema. Asegúrese de usar su propio script que incluya todas las aplicaciones del dispositivo.

Tenga en cuenta que las rutas de acceso siguientes suponen que ha copiado el contenido de la iso de aplicaciones de bandeja de entrada en la carpeta C:\Temp\Lab\Apps\Bandeja de entrada.

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.CortanaApp_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.CortanaApp_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\Microsoft.UI.Xaml.x64.2.3.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.BingNews_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.BingNews_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\Microsoft.UI.Xaml.x64.2.3.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.Advertising.Xaml.x64.10.0.appx

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.BingWeather_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.BingWeather_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\Microsoft.UI.Xaml.x64.2.3.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.Advertising.Xaml.x64.10.0.appx

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.DesktopAppInstaller_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.DesktopAppInstaller_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx 

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.GamingApp_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.GamingApp_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx 

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.GetHelp_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.GetHelp_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx 

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.Getstarted_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.Getstarted_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.HEIFImageExtension_8wekyb3d8bbwe.x64.appx /licensepath:.\Appx\Microsoft.HEIFImageExtension_8wekyb3d8bbwe.x64.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  
 
DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.Messaging_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.Messaging_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx 

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.MicrosoftOfficeHub_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.MicrosoftOfficeHub_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.MicrosoftSolitaireCollection_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.MicrosoftSolitaireCollection_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.Advertising.Xaml.x64.10.0.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.Services.Store.Engagement.x64.appx 

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.MicrosoftStickyNotes_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.MicrosoftStickyNotes_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx 

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.Paint_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.Paint_8wekyb3d8bbwe.xml

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.People_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.People_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.Services.Store.Engagement.x64.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.Advertising.Xaml.x64.10.0.appx 

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.ScreenSketch_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.ScreenSketch_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  
 
DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.SecHealthUI_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.SecHealthUI_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\Microsoft.UI.Xaml.x64.2.4.appx

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.StorePurchaseApp_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.StorePurchaseApp_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx 

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.Todos_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.Todos_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\Microsoft.UI.Xaml.x64.2.4.appx / dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx 

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VP9VideoExtensions_8wekyb3d8bbwe.x64.appx /licensepath:.\Appx\Microsoft.VP9VideoExtensions_8wekyb3d8bbwe.x64.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.WebMediaExtensions_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.WebMediaExtensions_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.WebpImageExtension_8wekyb3d8bbwe.x64.appx /licensepath:.\Appx\Microsoft.WebpImageExtension_8wekyb3d8bbwe.x64.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx 

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.Windows.Photos_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.Windows.Photos_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.WindowsAlarms_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.WindowsAlarms_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.WindowsCalculator_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.WindowsCalculator_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.WindowsCamera_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.WindowsCamera_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.WindowsCommunicationsApps_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.WindowsCommunicationsApps_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.Advertising.Xaml.x64.10.0.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.WindowsFeedbackHub_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.WindowsFeedbackHub_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.WindowsMaps_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.WindowsMaps_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.WindowsSoundRecorder_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.WindowsSoundRecorder_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.WindowsStore_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.WindowsStore_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx 

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.Xbox.TCUI_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.Xbox.TCUI_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx 

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.XboxIdentityProvider_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.XboxIdentityProvider_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Framework.x64.2.2.appx  /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.NET.Native.Runtime.x64.2.2.appx 

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.XboxSpeechToTextOverlay_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.XboxSpeechToTextOverlay_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.XboxGameOverlay_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.XboxGameOverlay_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.YourPhone_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.YourPhone_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.ZuneMusic_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.ZuneMusic_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.ZuneVideo_8wekyb3d8bbwe.appxbundle /licensepath:.\Appx\Microsoft.ZuneVideo_8wekyb3d8bbwe.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  

DISM /image:C:\Mount\Windows /add-ProvisionedAppxPackage /packagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\MicrosoftWindows.Client.WebExperience_cw5n1h2txyewy.appxbundle /licensepath:.\Appx\Microsoft.WebExperience_cw5n1h2txyewy.xml /dependencypackagepath:C:\Temp\Lab\Apps\Inbox\amd64fre\Microsoft.VCLibs.x64.14.00.appx  

Buscar letras de unidad con un script

Use este script en Windows PE para identificar una unidad que tenga una carpeta denominada "Images".

@echo Find a drive that has a folder titled Images.
@for %%a in (C D E F G H I J K L M N O P Q R S T U V W X Y Z) do @if exist %%a:\Images\ set IMAGESDRIVE=%%a
@echo The Images folder is on drive: %IMAGESDRIVE%
@dir %IMAGESDRIVE%:\Images /w