Partager via

Exemples de modèle Resource Manager pour les règles d’alerte de métrique dans Azure Monitor

  • Article

Cet article fournit des exemples d’utilisation de modèles Azure Resource Manager pour configurer des règles d’alerte de métrique dans Azure Monitor. Chaque exemple comprend un fichier de modèle et un fichier de paramètres avec des exemples de valeurs à fournir au modèle.

Notes

Pour obtenir une liste des exemples disponibles et des conseils sur leur déploiement dans votre abonnement Azure, consultez Exemples Azure Resource Manager pour Azure Monitor.

Consultez Ressources prises en charge pour les alertes de métrique dans Azure Monitor pour obtenir une liste des ressources qui peuvent être utilisées avec des règles d’alerte de métrique. Une explication du schéma et des propriétés d’une règle d’alerte est disponible dans Alertes de métrique – Créer ou mettre à jour.

Notes

Modèle de ressource pour créer des alertes de métrique pour le type de ressource : Espace de travail Azure Log Analytics (notamment) Microsoft.OperationalInsights/workspaces, nécessite des étapes supplémentaires. Pour plus d’informations, consultez Alerte de métrique pour les journaux – Modèle de ressource.

Références du modèle

Critère unique, seuil statique

L’exemple suivant crée une règle d’alerte de métrique à l’aide d’un critère unique et d’un seuil statique.

Fichier de modèle

@description('Name of the alert')
@minLength(1)
param alertName string

@description('Description of alert')
param alertDescription string = 'This is a metric alert'

@description('Severity of alert {0,1,2,3,4}')
@allowed([
  0
  1
  2
  3
  4
])
param alertSeverity int = 3

@description('Specifies whether the alert is enabled')
param isEnabled bool = true

@description('Full Resource ID of the resource emitting the metric that will be used for the comparison. For example /subscriptions/00000000-0000-0000-0000-0000-00000000/resourceGroups/ResourceGroupName/providers/Microsoft.compute/virtualMachines/VM_xyz')
@minLength(1)
param resourceId string

@description('Name of the metric used in the comparison to activate the alert.')
@minLength(1)
param metricName string

@description('Operator comparing the current value with the threshold value.')
@allowed([
  'Equals'
  'GreaterThan'
  'GreaterThanOrEqual'
  'LessThan'
  'LessThanOrEqual'
])
param operator string = 'GreaterThan'

@description('The threshold value at which the alert is activated.')
param threshold int = 0

@description('How the data that is collected should be combined over time.')
@allowed([
  'Average'
  'Minimum'
  'Maximum'
  'Total'
  'Count'
])
param timeAggregation string = 'Average'

@description('Period of time used to monitor alert activity based on the threshold. Must be between one minute and one day. ISO 8601 duration format.')
@allowed([
  'PT1M'
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
  'PT6H'
  'PT12H'
  'PT24H'
])
param windowSize string = 'PT5M'

@description('how often the metric alert is evaluated represented in ISO 8601 duration format')
@allowed([
  'PT1M'
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param evaluationFrequency string = 'PT1M'

@description('The ID of the action group that is triggered when the alert is activated or deactivated')
param actionGroupId string = ''

resource metricAlert 'Microsoft.Insights/metricAlerts@2018-03-01' = {
  name: alertName
  location: 'global'
  properties: {
    description: alertDescription
    severity: alertSeverity
    enabled: isEnabled
    scopes: [
      resourceId
    ]
    evaluationFrequency: evaluationFrequency
    windowSize: windowSize
    criteria: {
      'odata.type': 'Microsoft.Azure.Monitor.SingleResourceMultipleMetricCriteria'
      allOf: [
        {
          name: '1st criterion'
          metricName: metricName
          dimensions: []
          operator: operator
          threshold: threshold
          timeAggregation: timeAggregation
          criterionType: 'StaticThresholdCriterion'
        }
      ]
    }
    actions: [
      {
        actionGroupId: actionGroupId
      }
    ]
  }
}

Fichier de paramètres

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "alertName": {
      "value": "New Metric Alert"
    },
    "alertDescription": {
      "value": "New metric alert created via template"
    },
    "alertSeverity": {
      "value":3
    },
    "isEnabled": {
      "value": true
    },
    "resourceId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resourceGroup-name/providers/Microsoft.Compute/virtualMachines/replace-with-resource-name"
    },
    "metricName": {
      "value": "Percentage CPU"
    },
    "operator": {
      "value": "GreaterThan"
    },
    "threshold": {
      "value": 80
    },
    "timeAggregation": {
      "value": "Average"
    },
    "actionGroupId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/resource-group-name/providers/Microsoft.Insights/actionGroups/replace-with-action-group"
    }
  }
}

Critère unique, seuil dynamique

L’exemple suivant crée une règle d’alerte de métrique à l’aide d’un critère unique et d’un seuil dynamique.

Fichier de modèle

@description('Name of the alert')
@minLength(1)
param alertName string

@description('Description of alert')
param alertDescription string = 'This is a metric alert'

@description('Severity of alert {0,1,2,3,4}')
@allowed([
  0
  1
  2
  3
  4
])
param alertSeverity int = 3

@description('Specifies whether the alert is enabled')
param isEnabled bool = true

@description('Full Resource ID of the resource emitting the metric that will be used for the comparison. For example /subscriptions/00000000-0000-0000-0000-0000-00000000/resourceGroups/ResourceGroupName/providers/Microsoft.compute/virtualMachines/VM_xyz')
@minLength(1)
param resourceId string

@description('Name of the metric used in the comparison to activate the alert.')
@minLength(1)
param metricName string

@description('Operator comparing the current value with the threshold value.')
@allowed([
  'GreaterThan'
  'LessThan'
  'GreaterOrLessThan'
])
param operator string = 'GreaterOrLessThan'

@description('Tunes how \'noisy\' the Dynamic Thresholds alerts will be: \'High\' will result in more alerts while \'Low\' will result in fewer alerts.')
@allowed([
  'High'
  'Medium'
  'Low'
])
param alertSensitivity string = 'Medium'

@description('The number of periods to check in the alert evaluation.')
param numberOfEvaluationPeriods int = 4

@description('The number of unhealthy periods to alert on (must be lower or equal to numberOfEvaluationPeriods).')
param minFailingPeriodsToAlert int = 3

@description('Use this option to set the date from which to start learning the metric historical data and calculate the dynamic thresholds (in ISO8601 format, e.g. \'2019-12-31T22:00:00Z\').')
param ignoreDataBefore string = ''

@description('How the data that is collected should be combined over time.')
@allowed([
  'Average'
  'Minimum'
  'Maximum'
  'Total'
  'Count'
])
param timeAggregation string = 'Average'

@description('Period of time used to monitor alert activity based on the threshold. Must be between five minutes and one hour. ISO 8601 duration format.')
@allowed([
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param windowSize string = 'PT5M'

@description('how often the metric alert is evaluated represented in ISO 8601 duration format')
@allowed([
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param evaluationFrequency string = 'PT5M'

@description('The ID of the action group that is triggered when the alert is activated or deactivated')
param actionGroupId string = ''

resource metricAlert 'Microsoft.Insights/metricAlerts@2018-03-01' = {
  name: alertName
  location: 'global'
  properties: {
    description: alertDescription
    severity: alertSeverity
    enabled: isEnabled
    scopes: [
      resourceId
    ]
    evaluationFrequency: evaluationFrequency
    windowSize: windowSize
    criteria: {
      'odata.type': 'Microsoft.Azure.Monitor.MultipleResourceMultipleMetricCriteria'
      allOf: [
        {
          criterionType: 'DynamicThresholdCriterion'
          name: '1st criterion'
          metricName: metricName
          dimensions: []
          operator: operator
          alertSensitivity: alertSensitivity
          failingPeriods: {
            numberOfEvaluationPeriods: numberOfEvaluationPeriods
            minFailingPeriodsToAlert: minFailingPeriodsToAlert
          }
          ignoreDataBefore: ignoreDataBefore
          timeAggregation: timeAggregation
        }
      ]
    }
    actions: [
      {
        actionGroupId: actionGroupId
      }
    ]
  }
}

Fichier de paramètres

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "alertName": {
      "value": "New Metric Alert with Dynamic Thresholds"
    },
    "alertDescription": {
      "value": "New metric alert with Dynamic Thresholds created via template"
    },
    "alertSeverity": {
      "value":3
    },
    "isEnabled": {
      "value": true
    },
    "resourceId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resourceGroup-name/providers/Microsoft.Compute/virtualMachines/replace-with-resource-name"
    },
    "metricName": {
      "value": "Percentage CPU"
    },
    "operator": {
      "value": "GreaterOrLessThan"
    },
    "alertSensitivity": {
      "value": "Medium"
    },
    "numberOfEvaluationPeriods": {
      "value": "4"
    },
    "minFailingPeriodsToAlert": {
      "value": "3"
    },
    "ignoreDataBefore": {
      "value": ""
    },
    "timeAggregation": {
      "value": "Average"
    },
    "actionGroupId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/resource-group-name/providers/Microsoft.Insights/actionGroups/replace-with-action-group"
    }
  }
}

Plusieurs critères, seuil statique

Les alertes de métrique prennent en charge la génération d’alertes sur des métriques multidimensionnelles, et jusqu’à 5 critères par règle d’alerte. L’exemple suivant crée une règle d’alerte de métrique sur les métriques dimensionnelles et spécifie plusieurs critères.

Les contraintes suivantes s’appliquent lors de l’utilisation de dimensions dans une règle d’alerte qui contient plusieurs critères :

  • Vous ne pouvez sélectionner qu’une seule valeur par dimension au sein de chaque critère.

  • Vous ne pouvez pas utiliser « * » comme valeur de dimension

  • Quand des métriques configurées dans différents critères prennent en charge la même dimension, une valeur de dimension configurée doit être explicitement définie de la même façon pour toutes ces métriques dans les critères appropriés.

    • Dans l’exemple ci-dessous, dans la mesure où les métriques Transactions et SuccessE2ELatency ont une dimension ApiName et que criterion1 spécifie la valeur "GetBlob" pour la dimension ApiName, criterion2 doit également définir une valeur "GetBlob" pour la dimension ApiName.

Fichier de modèle

@description('Name of the alert')
param alertName string

@description('Description of alert')
param alertDescription string = 'This is a metric alert'

@description('Severity of alert {0,1,2,3,4}')
@allowed([
  0
  1
  2
  3
  4
])
param alertSeverity int = 3

@description('Specifies whether the alert is enabled')
param isEnabled bool = true

@description('Resource ID of the resource emitting the metric that will be used for the comparison.')
param resourceId string = ''

@description('Criterion includes metric name, dimension values, threshold and an operator. The alert rule fires when ALL criteria are met')
param criterion1 object

@description('Criterion includes metric name, dimension values, threshold and an operator. The alert rule fires when ALL criteria are met')
param criterion2 object

@description('Period of time used to monitor alert activity based on the threshold. Must be between one minute and one day. ISO 8601 duration format.')
@allowed([
  'PT1M'
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
  'PT6H'
  'PT12H'
  'PT24H'
])
param windowSize string = 'PT5M'

@description('how often the metric alert is evaluated represented in ISO 8601 duration format')
@allowed([
  'PT1M'
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param evaluationFrequency string = 'PT1M'

@description('The ID of the action group that is triggered when the alert is activated or deactivated')
param actionGroupId string = ''

var criterion1_var = array(criterion1)
var criterion2_var = array(criterion2)
var criteria = concat(criterion1_var, criterion2_var)

resource metricAlert 'Microsoft.Insights/metricAlerts@2018-03-01' = {
  name: alertName
  location: 'global'
  properties: {
    description: alertDescription
    severity: alertSeverity
    enabled: isEnabled
    scopes: [
      resourceId
    ]
    evaluationFrequency: evaluationFrequency
    windowSize: windowSize
    criteria: {
      'odata.type': 'Microsoft.Azure.Monitor.SingleResourceMultipleMetricCriteria'
      allOf: criteria
    }
    actions: [
      {
        actionGroupId: actionGroupId
      }
    ]
  }
}

Fichier de paramètres

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "alertName": {
      "value": "New Multi-dimensional Metric Alert (Replace with your alert name)"
    },
    "alertDescription": {
      "value": "New multi-dimensional metric alert created via template (Replace with your alert description)"
    },
    "alertSeverity": {
      "value": 3
    },
    "isEnabled": {
      "value": true
    },
    "resourceId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resourcegroup-name/providers/Microsoft.Storage/storageAccounts/replace-with-storage-account"
    },
    "criterion1": {
      "value": {
        "name": "1st criterion",
        "metricName": "Transactions",
        "dimensions": [
          {
            "name": "ResponseType",
            "operator": "Include",
            "values": [ "Success" ]
          },
          {
            "name": "ApiName",
            "operator": "Include",
            "values": [ "GetBlob" ]
          }
        ],
        "operator": "GreaterThan",
        "threshold": 5,
        "timeAggregation": "Total"
      }
    },
    "criterion2": {
      "value": {
        "name": "2nd criterion",
        "metricName": "SuccessE2ELatency",
        "dimensions": [
          {
            "name": "ApiName",
            "operator": "Include",
            "values": [ "GetBlob" ]
          }
        ],
        "operator": "GreaterThan",
        "threshold": 250,
        "timeAggregation": "Average"
      }
    },
    "actionGroupId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name/providers/Microsoft.Insights/actionGroups/replace-with-actiongroup-name"
    }
  }
}

Plusieurs dimensions, seuil statique

Une règle d’alerte unique peut superviser plusieurs séries chronologiques de métrique à la fois, ce qui réduit le nombre de règles d’alerte à gérer. L’exemple suivant crée une règle d’alerte de métrique statique sur des métriques dimensionnelles.

Dans cet exemple, la règle d’alerte supervise les combinaisons de valeurs des dimensions ResponseType et ApiName pour la métrique Transactions :

  1. ResponsType : l’utilisation du caractère générique « * » signifie que, pour chaque valeur de la dimension ResponseType, y compris ses futures valeurs, une série chronologique différente est supervisée individuellement.
  2. ApiName : une série chronologique différente est supervisée uniquement pour les valeurs de dimension GetBlob et PutBlob.

Voici par exemple quelques-unes des séries chronologiques potentielles supervisées par cette règle d’alerte :

  • Metric = Transactions, ResponseType = Success, ApiName = GetBlob
  • Metric = Transactions, ResponseType = Success, ApiName = PutBlob
  • Metric = Transactions, ResponseType = Server Timeout, ApiName = GetBlob
  • Metric = Transactions, ResponseType = Server Timeout, ApiName = PutBlob

Fichier de modèle

@description('Name of the alert')
param alertName string

@description('Description of alert')
param alertDescription string = 'This is a metric alert'

@description('Severity of alert {0,1,2,3,4}')
@allowed([
  0
  1
  2
  3
  4
])
param alertSeverity int = 3

@description('Specifies whether the alert is enabled')
param isEnabled bool = true

@description('Resource ID of the resource emitting the metric that will be used for the comparison.')
param resourceId string = ''

@description('Criterion includes metric name, dimension values, threshold and an operator. The alert rule fires when ALL criteria are met')
param criterion object

@description('Period of time used to monitor alert activity based on the threshold. Must be between one minute and one day. ISO 8601 duration format.')
@allowed([
  'PT1M'
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
  'PT6H'
  'PT12H'
  'PT24H'
])
param windowSize string = 'PT5M'

@description('how often the metric alert is evaluated represented in ISO 8601 duration format')
@allowed([
  'PT1M'
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param evaluationFrequency string = 'PT1M'

@description('The ID of the action group that is triggered when the alert is activated or deactivated')
param actionGroupId string = ''

var criteria = array(criterion)

resource metricAlert 'Microsoft.Insights/metricAlerts@2018-03-01' = {
  name: alertName
  location: 'global'
  properties: {
    description: alertDescription
    severity: alertSeverity
    enabled: isEnabled
    scopes: [
      resourceId
    ]
    evaluationFrequency: evaluationFrequency
    windowSize: windowSize
    criteria: {
      'odata.type': 'Microsoft.Azure.Monitor.SingleResourceMultipleMetricCriteria'
      allOf: criteria
    }
    actions: [
      {
        actionGroupId: actionGroupId
      }
    ]
  }
}

Fichier de paramètres

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "alertName": {
      "value": "New multi-dimensional metric alert rule (replace with your alert name)"
    },
    "alertDescription": {
      "value": "New multi-dimensional metric alert rule created via template (replace with your alert description)"
    },
    "alertSeverity": {
      "value": 3
    },
    "isEnabled": {
      "value": true
    },
    "resourceId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resourcegroup-name/providers/Microsoft.Storage/storageAccounts/replace-with-storage-account"
    },
    "criterion": {
      "value": {
        "name": "Criterion",
        "metricName": "Transactions",
        "dimensions": [
          {
            "name": "ResponseType",
            "operator": "Include",
            "values": [ "*" ]
          },
          {
            "name": "ApiName",
            "operator": "Include",
            "values": [ "GetBlob", "PutBlob" ]
          }
        ],
        "operator": "GreaterThan",
        "threshold": 5,
        "timeAggregation": "Total"
      }
    },
    "actionGroupId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name/providers/Microsoft.Insights/actionGroups/replace-with-actiongroup-name"
    }
  }
}

Notes

L’utilisation de « Tous » comme valeur de dimension équivaut à sélectionner le caractère générique « * » (toutes les valeurs actuelles et futures).

Plusieurs dimensions, seuils dynamiques

Une règle d’alerte de seuil dynamique unique permet de créer simultanément des seuils adaptés à des centaines de séries chronologiques de métriques (même de différents types), ce qui permet d’avoir moins de règles d’alerte à gérer. L’exemple suivant crée une règle d’alerte de métrique de seuil dynamique sur des métriques dimensionnelles.

Dans cet exemple, la règle d’alerte supervise les combinaisons de valeurs des dimensions ResponseType et ApiName pour la métrique Transactions :

  1. ResponsType : pour chaque valeur de la dimension ResponseType, y compris ses futures valeurs, une série chronologique différente est supervisée individuellement.
  2. ApiName : une série chronologique différente est supervisée uniquement pour les valeurs de dimension GetBlob et PutBlob.

Voici par exemple quelques-unes des séries chronologiques potentielles supervisées par cette règle d’alerte :

  • Metric = Transactions, ResponseType = Success, ApiName = GetBlob
  • Metric = Transactions, ResponseType = Success, ApiName = PutBlob
  • Metric = Transactions, ResponseType = Server Timeout, ApiName = GetBlob
  • Metric = Transactions, ResponseType = Server Timeout, ApiName = PutBlob

Notes

Plusieurs critères ne sont actuellement pas pris en charge pour les règles d’alerte de métrique qui utilisent des seuils dynamiques.

Fichier de modèle

@description('Name of the alert')
param alertName string

@description('Description of alert')
param alertDescription string = 'This is a metric alert'

@description('Severity of alert {0,1,2,3,4}')
@allowed([
  0
  1
  2
  3
  4
])
param alertSeverity int = 3

@description('Specifies whether the alert is enabled')
param isEnabled bool = true

@description('Resource ID of the resource emitting the metric that will be used for the comparison.')
param resourceId string = ''

@description('Criterion includes metric name, dimension values, threshold and an operator.')
param criterion object

@description('Period of time used to monitor alert activity based on the threshold. Must be between five minutes and one hour. ISO 8601 duration format.')
@allowed([
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param windowSize string = 'PT5M'

@description('how often the metric alert is evaluated represented in ISO 8601 duration format')
@allowed([
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param evaluationFrequency string = 'PT5M'

@description('The ID of the action group that is triggered when the alert is activated or deactivated')
param actionGroupId string = ''

var criteria = array(criterion)

resource metricAlert 'Microsoft.Insights/metricAlerts@2018-03-01' = {
  name: alertName
  location: 'global'
  properties: {
    description: alertDescription
    severity: alertSeverity
    enabled: isEnabled
    scopes: [
      resourceId
    ]
    evaluationFrequency: evaluationFrequency
    windowSize: windowSize
    criteria: {
      'odata.type': 'Microsoft.Azure.Monitor.MultipleResourceMultipleMetricCriteria'
      allOf: criteria
    }
    actions: [
      {
        actionGroupId: actionGroupId
      }
    ]
  }
}

Fichier de paramètres

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "alertName": {
      "value": "New Multi-dimensional Metric Alert with Dynamic Thresholds (Replace with your alert name)"
    },
    "alertDescription": {
      "value": "New multi-dimensional metric alert with Dynamic Thresholds created via template (Replace with your alert description)"
    },
    "alertSeverity": {
      "value": 3
    },
    "isEnabled": {
      "value": true
    },
    "resourceId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resourcegroup-name/providers/Microsoft.Storage/storageAccounts/replace-with-storage-account"
    },
    "criterion": {
      "value": {
        "criterionType": "DynamicThresholdCriterion",
        "name": "1st criterion",
        "metricName": "Transactions",
        "dimensions": [
          {
            "name": "ResponseType",
            "operator": "Include",
            "values": [ "*" ]
          },
          {
            "name": "ApiName",
            "operator": "Include",
            "values": [ "GetBlob", "PutBlob" ]
          }
        ],
        "operator": "GreaterOrLessThan",
        "alertSensitivity": "Medium",
        "failingPeriods": {
          "numberOfEvaluationPeriods": "4",
          "minFailingPeriodsToAlert": "3"
        },
        "timeAggregation": "Total"
      }
    },
    "actionGroupId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name/providers/Microsoft.Insights/actionGroups/replace-with-actiongroup-name"
    }
  }
}

Métrique personnalisée, seuil statique

Vous pouvez utiliser le modèle suivant pour créer une règle d’alerte de métrique de seuil statique plus avancée sur une métrique personnalisée.

Pour en savoir plus sur les métriques personnalisées dans Azure Monitor, consultez Métriques personnalisées dans Azure Monitor.

Lorsque vous créez une règle d’alerte sur une métrique personnalisée, vous devez spécifier à la fois le nom et l’espace de noms de la métrique. Vous devez également vous assurer que la métrique personnalisée est déjà signalée, car vous ne pouvez pas créer de règle d’alerte sur une métrique personnalisée qui n’existe pas encore.

Fichier de modèle

@description('Name of the alert')
@minLength(1)
param alertName string

@description('Description of alert')
param alertDescription string = 'This is a metric alert'

@description('Severity of alert {0,1,2,3,4}')
@allowed([
  0
  1
  2
  3
  4
])
param alertSeverity int = 3

@description('Specifies whether the alert is enabled')
param isEnabled bool = true

@description('Full Resource ID of the resource emitting the metric that will be used for the comparison. For example /subscriptions/00000000-0000-0000-0000-0000-00000000/resourceGroups/ResourceGroupName/providers/Microsoft.compute/virtualMachines/VM_xyz')
@minLength(1)
param resourceId string

@description('Name of the metric used in the comparison to activate the alert.')
@minLength(1)
param metricName string

@description('Namespace of the metric used in the comparison to activate the alert.')
@minLength(1)
param metricNamespace string

@description('Operator comparing the current value with the threshold value.')
@allowed([
  'Equals'
  'GreaterThan'
  'GreaterThanOrEqual'
  'LessThan'
  'LessThanOrEqual'
])
param operator string = 'GreaterThan'

@description('The threshold value at which the alert is activated.')
param threshold int = 0

@description('How the data that is collected should be combined over time.')
@allowed([
  'Average'
  'Minimum'
  'Maximum'
  'Total'
  'Count'
])
param timeAggregation string = 'Average'

@description('Period of time used to monitor alert activity based on the threshold. Must be between one minute and one day. ISO 8601 duration format.')
@allowed([
  'PT1M'
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
  'PT6H'
  'PT12H'
  'PT24H'
])
param windowSize string = 'PT5M'

@description('How often the metric alert is evaluated represented in ISO 8601 duration format')
@allowed([
  'PT1M'
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param evaluationFrequency string = 'PT1M'

@description('The ID of the action group that is triggered when the alert is activated or deactivated')
param actionGroupId string = ''

resource metricAlert 'Microsoft.Insights/metricAlerts@2018-03-01' = {
  name: alertName
  location: 'global'
  properties: {
    description: alertDescription
    severity: alertSeverity
    enabled: isEnabled
    scopes: [
      resourceId
    ]
    evaluationFrequency: evaluationFrequency
    windowSize: windowSize
    criteria: {
      'odata.type': 'Microsoft.Azure.Monitor.SingleResourceMultipleMetricCriteria'
      allOf: [
        {
          name: '1st criterion'
          metricName: metricName
          metricNamespace: metricNamespace
          dimensions: []
          operator: operator
          threshold: threshold
          timeAggregation: timeAggregation
          criterionType: 'StaticThresholdCriterion'
        }
      ]
    }
    actions: [
      {
        actionGroupId: actionGroupId
      }
    ]
  }
}

Fichier de paramètres

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "alertName": {
      "value": "New alert rule on a custom metric"
    },
    "alertDescription": {
      "value": "New alert rule on a custom metric created via template"
    },
    "alertSeverity": {
      "value": 3
    },
    "isEnabled": {
      "value": true
    },
    "resourceId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resourceGroup-name/providers/microsoft.insights/components/replace-with-application-insights-resource-name"
    },
    "metricName": {
      "value": "The custom metric name"
    },
    "metricNamespace": {
      "value": "Azure.ApplicationInsights"
    },
    "operator": {
      "value": "GreaterThan"
    },
    "threshold": {
      "value": 80
    },
    "timeAggregation": {
      "value": "Average"
    },
    "actionGroupId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/resource-group-name/providers/Microsoft.Insights/actionGroups/replace-with-action-group"
    }
  }
}

Notes

Vous pouvez rechercher l’espace de noms de métrique d’une métrique personnalisée spécifique en parcourant vos métriques personnalisées à l’aide du Portail Azure

Plusieurs ressources

Azure Monitor prend en charge la supervision de plusieurs ressources du même type avec une seule règle d’alerte de métrique, pour les ressources qui existent dans la même région Azure. Pour l’instant, cette fonctionnalité est prise en charge uniquement dans le cloud public Azure et uniquement pour les machines virtuelles, les bases de données SQL Server, les pools élastiques SQL Server et les appareils Azure Stack Edge. Cette fonctionnalité est aussi uniquement disponible pour les métriques de plateforme et n’est pas prise en charge pour les métriques personnalisées.

Une règle d’alerte de seuil dynamique permet aussi de créer simultanément des seuils adaptés à des centaines de séries de métriques (même de différents types), ce qui permet d’avoir moins de règles d’alerte à gérer.

Cette section décrit les modèles Azure Resource Manager pour trois scénarios de supervision de ressources multiples avec une seule règle.

  • Supervision de toutes les machines virtuelles (dans une région Azure) dans un ou plusieurs groupes de ressources.
  • Supervision de toutes les machines virtuelles (dans une région Azure) dans un abonnement.
  • Supervision d’une liste de machines virtuelles (dans une région Azure) dans un abonnement.

Notes

  • Dans une règle d’alerte métrique qui surveille plusieurs ressources, une seule condition est autorisée.
  • Si vous créez une alerte de métrique pour une seule ressource, le modèle utilise le ResourceId de la ressource cible. Si vous créez une alerte de métrique pour plusieurs ressources, le modèle utilise les scope, TargetResourceType et TargetResourceRegion des ressources cibles.

Alerte de seuil statique sur toutes les machines virtuelles dans un ou plusieurs groupes de ressources

Ce modèle va créer une règle d’alerte de métrique de seuil statique qui supervise le pourcentage d’UC de toutes les machines virtuelles (dans une seule région Azure) dans un ou plusieurs groupes de ressources.

Enregistrez le fichier JSON ci-après sous le nom all-vms-in-resource-group-static.json pour les besoins de cette procédure pas à pas.

Fichier de modèle

@description('Name of the alert')
@minLength(1)
param alertName string

@description('Description of alert')
param alertDescription string = 'This is a metric alert'

@description('Severity of alert {0,1,2,3,4}')
@allowed([
  0
  1
  2
  3
  4
])
param alertSeverity int = 3

@description('Specifies whether the alert is enabled')
param isEnabled bool = true

@description('Full path of the resource group(s) where target resources to be monitored are in. For example - /subscriptions/00000000-0000-0000-0000-0000-00000000/resourceGroups/ResourceGroupName')
@minLength(1)
param targetResourceGroup array

@description('Azure region in which target resources to be monitored are in (without spaces). For example: EastUS')
@allowed([
  'EastUS'
  'EastUS2'
  'CentralUS'
  'NorthCentralUS'
  'SouthCentralUS'
  'WestCentralUS'
  'WestUS'
  'WestUS2'
  'CanadaEast'
  'CanadaCentral'
  'BrazilSouth'
  'NorthEurope'
  'WestEurope'
  'FranceCentral'
  'FranceSouth'
  'UKWest'
  'UKSouth'
  'GermanyCentral'
  'GermanyNortheast'
  'GermanyNorth'
  'GermanyWestCentral'
  'SwitzerlandNorth'
  'SwitzerlandWest'
  'NorwayEast'
  'NorwayWest'
  'SoutheastAsia'
  'EastAsia'
  'AustraliaEast'
  'AustraliaSoutheast'
  'AustraliaCentral'
  'AustraliaCentral2'
  'ChinaEast'
  'ChinaNorth'
  'ChinaEast2'
  'ChinaNorth2'
  'CentralIndia'
  'WestIndia'
  'SouthIndia'
  'JapanEast'
  'JapanWest'
  'KoreaCentral'
  'KoreaSouth'
  'SouthAfricaWest'
  'SouthAfricaNorth'
  'UAECentral'
  'UAENorth'
])
param targetResourceRegion string

@description('Resource type of target resources to be monitored.')
@minLength(1)
param targetResourceType string

@description('Name of the metric used in the comparison to activate the alert.')
@minLength(1)
param metricName string

@description('Operator comparing the current value with the threshold value.')
@allowed([
  'Equals'
  'GreaterThan'
  'GreaterThanOrEqual'
  'LessThan'
  'LessThanOrEqual'
])
param operator string = 'GreaterThan'

@description('The threshold value at which the alert is activated.')
param threshold string = '0'

@description('How the data that is collected should be combined over time.')
@allowed([
  'Average'
  'Minimum'
  'Maximum'
  'Total'
  'Count'
])
param timeAggregation string = 'Average'

@description('Period of time used to monitor alert activity based on the threshold. Must be between one minute and one day. ISO 8601 duration format.')
@allowed([
  'PT1M'
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
  'PT6H'
  'PT12H'
  'PT24H'
])
param windowSize string = 'PT5M'

@description('how often the metric alert is evaluated represented in ISO 8601 duration format')
@allowed([
  'PT1M'
  'PT5M'
  'PT15M'
  'PT30M'
])
param evaluationFrequency string = 'PT1M'

@description('The ID of the action group that is triggered when the alert is activated or deactivated')
param actionGroupId string = ''

resource metricAlert 'Microsoft.Insights/metricAlerts@2018-03-01' = {
  name: alertName
  location: 'global'
  properties: {
    description: alertDescription
    severity: alertSeverity
    enabled: isEnabled
    scopes: targetResourceGroup
    targetResourceType: targetResourceType
    targetResourceRegion: targetResourceRegion
    evaluationFrequency: evaluationFrequency
    windowSize: windowSize
    criteria: {
      'odata.type': 'Microsoft.Azure.Monitor.MultipleResourceMultipleMetricCriteria'
      allOf: [
        {
          name: '1st criterion'
          metricName: metricName
          dimensions: []
          operator: operator
          threshold: threshold
          timeAggregation: timeAggregation
          criterionType: 'StaticThresholdCriterion'
        }
      ]
    }
    actions: [
      {
        actionGroupId: actionGroupId
      }
    ]
  }
}

Fichier de paramètres

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "alertName": {
      "value": "Multi-resource metric alert via Azure Resource Manager template"
    },
    "alertDescription": {
      "value": "New Multi-resource metric alert created via template"
    },
    "alertSeverity": {
      "value": 3
    },
    "isEnabled": {
      "value": true
    },
    "targetResourceGroup": {
      "value": [
        "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name1",
        "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name2"
      ]
    },
    "targetResourceRegion": {
      "value": "SouthCentralUS"
    },
    "targetResourceType": {
      "value": "Microsoft.Compute/virtualMachines"
    },
    "metricName": {
      "value": "Percentage CPU"
    },
    "operator": {
      "value": "GreaterThan"
    },
    "threshold": {
      "value": 0
    },
    "timeAggregation": {
      "value": "Average"
    },
    "actionGroupId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name/providers/Microsoft.Insights/actionGroups/replace-with-action-group-name"
    }
  }
}

Alerte de seuil dynamique sur toutes les machines virtuelles dans un ou plusieurs groupes de ressources

Cet exemple crée une règle d’alerte de métrique de seuil dynamique qui supervise le pourcentage d’UC de toutes les machines virtuelles dans une seule région Azure, dans un ou plusieurs groupes de ressources.

Fichier de modèle

@description('Name of the alert')
@minLength(1)
param alertName string

@description('Description of alert')
param alertDescription string = 'This is a metric alert'

@description('Severity of alert {0,1,2,3,4}')
@allowed([
  0
  1
  2
  3
  4
])
param alertSeverity int = 3

@description('Specifies whether the alert is enabled')
param isEnabled bool = true

@description('Full path of the resource group(s) where target resources to be monitored are in. For example - /subscriptions/00000000-0000-0000-0000-0000-00000000/resourceGroups/ResourceGroupName')
@minLength(1)
param targetResourceGroup array

@description('Azure region in which target resources to be monitored are in (without spaces). For example: EastUS')
@allowed([
  'EastUS'
  'EastUS2'
  'CentralUS'
  'NorthCentralUS'
  'SouthCentralUS'
  'WestCentralUS'
  'WestUS'
  'WestUS2'
  'CanadaEast'
  'CanadaCentral'
  'BrazilSouth'
  'NorthEurope'
  'WestEurope'
  'FranceCentral'
  'FranceSouth'
  'UKWest'
  'UKSouth'
  'GermanyCentral'
  'GermanyNortheast'
  'GermanyNorth'
  'GermanyWestCentral'
  'SwitzerlandNorth'
  'SwitzerlandWest'
  'NorwayEast'
  'NorwayWest'
  'SoutheastAsia'
  'EastAsia'
  'AustraliaEast'
  'AustraliaSoutheast'
  'AustraliaCentral'
  'AustraliaCentral2'
  'ChinaEast'
  'ChinaNorth'
  'ChinaEast2'
  'ChinaNorth2'
  'CentralIndia'
  'WestIndia'
  'SouthIndia'
  'JapanEast'
  'JapanWest'
  'KoreaCentral'
  'KoreaSouth'
  'SouthAfricaWest'
  'SouthAfricaNorth'
  'UAECentral'
  'UAENorth'
])
param targetResourceRegion string

@description('Resource type of target resources to be monitored.')
@minLength(1)
param targetResourceType string

@description('Name of the metric used in the comparison to activate the alert.')
@minLength(1)
param metricName string

@description('Operator comparing the current value with the threshold value.')
@allowed([
  'GreaterThan'
  'LessThan'
  'GreaterOrLessThan'
])
param operator string = 'GreaterOrLessThan'

@description('Tunes how \'noisy\' the Dynamic Thresholds alerts will be: \'High\' will result in more alerts while \'Low\' will result in fewer alerts.')
@allowed([
  'High'
  'Medium'
  'Low'
])
param alertSensitivity string = 'Medium'

@description('The number of periods to check in the alert evaluation.')
param numberOfEvaluationPeriods int = 4

@description('The number of unhealthy periods to alert on (must be lower or equal to numberOfEvaluationPeriods).')
param minFailingPeriodsToAlert int = 3

@description('How the data that is collected should be combined over time.')
@allowed([
  'Average'
  'Minimum'
  'Maximum'
  'Total'
  'Count'
])
param timeAggregation string = 'Average'

@description('Period of time used to monitor alert activity based on the threshold. Must be between five minutes and one hour. ISO 8601 duration format.')
@allowed([
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param windowSize string = 'PT5M'

@description('how often the metric alert is evaluated represented in ISO 8601 duration format')
@allowed([
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param evaluationFrequency string = 'PT5M'

@description('The ID of the action group that is triggered when the alert is activated or deactivated')
param actionGroupId string = ''

resource metricAlert 'Microsoft.Insights/metricAlerts@2018-03-01' = {
  name: alertName
  location: 'global'
  properties: {
    description: alertDescription
    severity: alertSeverity
    enabled: isEnabled
    scopes: targetResourceGroup
    targetResourceType: targetResourceType
    targetResourceRegion: targetResourceRegion
    evaluationFrequency: evaluationFrequency
    windowSize: windowSize
    criteria: {
      'odata.type': 'Microsoft.Azure.Monitor.MultipleResourceMultipleMetricCriteria'
      allOf: [
        {
          criterionType: 'DynamicThresholdCriterion'
          name: '1st criterion'
          metricName: metricName
          dimensions: []
          operator: operator
          alertSensitivity: alertSensitivity
          failingPeriods: {
            numberOfEvaluationPeriods: numberOfEvaluationPeriods
            minFailingPeriodsToAlert: minFailingPeriodsToAlert
          }
          timeAggregation: timeAggregation
        }
      ]
    }
    actions: [
      {
        actionGroupId: actionGroupId
      }
    ]
  }
}

Fichier de paramètres

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "alertName": {
      "value": "Multi-resource metric alert with Dynamic Thresholds via Azure Resource Manager template"
    },
    "alertDescription": {
      "value": "New Multi-resource metric alert with Dynamic Thresholds created via template"
    },
    "alertSeverity": {
      "value": 3
    },
    "isEnabled": {
      "value": true
    },
    "targetResourceGroup": {
      "value": [
        "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name1",
        "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name2"
      ]
    },
    "targetResourceRegion": {
      "value": "SouthCentralUS"
    },
    "targetResourceType": {
      "value": "Microsoft.Compute/virtualMachines"
    },
    "metricName": {
      "value": "Percentage CPU"
    },
    "operator": {
      "value": "GreaterOrLessThan"
    },
    "alertSensitivity": {
      "value": "Medium"
    },
    "numberOfEvaluationPeriods": {
      "value": "4"
    },
    "minFailingPeriodsToAlert": {
      "value": "3"
    },
    "timeAggregation": {
      "value": "Average"
    },
    "actionGroupId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name/providers/Microsoft.Insights/actionGroups/replace-with-action-group-name"
    }
  }
}

Alerte de seuil statique sur toutes les machines virtuelles d’un abonnement

Cet exemple crée une règle d’alerte de métrique de seuil statique qui supervise le pourcentage d’UC de toutes les machines virtuelles dans une seule région Azure, dans un abonnement.

Fichier de modèle

@description('Name of the alert')
@minLength(1)
param alertName string

@description('Description of alert')
param alertDescription string = 'This is a metric alert'

@description('Severity of alert {0,1,2,3,4}')
@allowed([
  0
  1
  2
  3
  4
])
param alertSeverity int = 3

@description('Specifies whether the alert is enabled')
param isEnabled bool = true

@description('Azure Resource Manager path up to subscription ID. For example - /subscriptions/00000000-0000-0000-0000-0000-00000000')
@minLength(1)
param targetSubscription string

@description('Azure region in which target resources to be monitored are in (without spaces). For example: EastUS')
@allowed([
  'EastUS'
  'EastUS2'
  'CentralUS'
  'NorthCentralUS'
  'SouthCentralUS'
  'WestCentralUS'
  'WestUS'
  'WestUS2'
  'CanadaEast'
  'CanadaCentral'
  'BrazilSouth'
  'NorthEurope'
  'WestEurope'
  'FranceCentral'
  'FranceSouth'
  'UKWest'
  'UKSouth'
  'GermanyCentral'
  'GermanyNortheast'
  'GermanyNorth'
  'GermanyWestCentral'
  'SwitzerlandNorth'
  'SwitzerlandWest'
  'NorwayEast'
  'NorwayWest'
  'SoutheastAsia'
  'EastAsia'
  'AustraliaEast'
  'AustraliaSoutheast'
  'AustraliaCentral'
  'AustraliaCentral2'
  'ChinaEast'
  'ChinaNorth'
  'ChinaEast2'
  'ChinaNorth2'
  'CentralIndia'
  'WestIndia'
  'SouthIndia'
  'JapanEast'
  'JapanWest'
  'KoreaCentral'
  'KoreaSouth'
  'SouthAfricaWest'
  'SouthAfricaNorth'
  'UAECentral'
  'UAENorth'
])
param targetResourceRegion string

@description('Resource type of target resources to be monitored.')
@minLength(1)
param targetResourceType string

@description('Name of the metric used in the comparison to activate the alert.')
@minLength(1)
param metricName string

@description('Operator comparing the current value with the threshold value.')
@allowed([
  'Equals'
  'GreaterThan'
  'GreaterThanOrEqual'
  'LessThan'
  'LessThanOrEqual'
])
param operator string = 'GreaterThan'

@description('The threshold value at which the alert is activated.')
param threshold string = '0'

@description('How the data that is collected should be combined over time.')
@allowed([
  'Average'
  'Minimum'
  'Maximum'
  'Total'
  'Count'
])
param timeAggregation string = 'Average'

@description('Period of time used to monitor alert activity based on the threshold. Must be between one minute and one day. ISO 8601 duration format.')
@allowed([
  'PT1M'
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
  'PT6H'
  'PT12H'
  'PT24H'
])
param windowSize string = 'PT5M'

@description('how often the metric alert is evaluated represented in ISO 8601 duration format')
@allowed([
  'PT1M'
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param evaluationFrequency string = 'PT1M'

@description('The ID of the action group that is triggered when the alert is activated or deactivated')
param actionGroupId string = ''

resource metricAlert 'Microsoft.Insights/metricAlerts@2018-03-01' = {
  name: alertName
  location: 'global'
  properties: {
    description: alertDescription
    severity: alertSeverity
    enabled: isEnabled
    scopes: [
      targetSubscription
    ]
    targetResourceType: targetResourceType
    targetResourceRegion: targetResourceRegion
    evaluationFrequency: evaluationFrequency
    windowSize: windowSize
    criteria: {
      'odata.type': 'Microsoft.Azure.Monitor.MultipleResourceMultipleMetricCriteria'
      allOf: [
        {
          name: '1st criterion'
          metricName: metricName
          dimensions: []
          operator: operator
          threshold: threshold
          timeAggregation: timeAggregation
          criterionType: 'StaticThresholdCriterion'
        }
      ]
    }
    actions: [
      {
        actionGroupId: actionGroupId
      }
    ]
  }
}

Fichier de paramètres

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "alertName": {
      "value": "Multi-resource sub level metric alert via Azure Resource Manager template"
    },
    "alertDescription": {
      "value": "New Multi-resource sub level metric alert created via template"
    },
    "alertSeverity": {
      "value": 3
    },
    "isEnabled": {
      "value": true
    },
    "targetSubscription": {
      "value": "/subscriptions/replace-with-subscription-id"
    },
    "targetResourceRegion": {
      "value": "SouthCentralUS"
    },
    "targetResourceType": {
      "value": "Microsoft.Compute/virtualMachines"
    },
    "metricName": {
      "value": "Percentage CPU"
    },
    "operator": {
      "value": "GreaterThan"
    },
    "threshold": {
      "value": 0
    },
    "timeAggregation": {
      "value": "Average"
    },
    "actionGroupId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name/providers/Microsoft.Insights/actionGroups/replace-with-action-group-name"
    }
  }
}

Alerte de seuil dynamique sur toutes les machines virtuelles d’un abonnement

Cet exemple crée une règle d’alerte de métrique de seuil dynamique qui supervise le pourcentage d’UC de toutes les machines virtuelles dans une seule région Azure, dans un abonnement.

Fichier de modèle

@description('Name of the alert')
@minLength(1)
param alertName string

@description('Description of alert')
param alertDescription string = 'This is a metric alert'

@description('Severity of alert {0,1,2,3,4}')
@allowed([
  0
  1
  2
  3
  4
])
param alertSeverity int = 3

@description('Specifies whether the alert is enabled')
param isEnabled bool = true

@description('Azure Resource Manager path up to subscription ID. For example - /subscriptions/00000000-0000-0000-0000-0000-00000000')
@minLength(1)
param targetSubscription string

@description('Azure region in which target resources to be monitored are in (without spaces). For example: EastUS')
@allowed([
  'EastUS'
  'EastUS2'
  'CentralUS'
  'NorthCentralUS'
  'SouthCentralUS'
  'WestCentralUS'
  'WestUS'
  'WestUS2'
  'CanadaEast'
  'CanadaCentral'
  'BrazilSouth'
  'NorthEurope'
  'WestEurope'
  'FranceCentral'
  'FranceSouth'
  'UKWest'
  'UKSouth'
  'GermanyCentral'
  'GermanyNortheast'
  'GermanyNorth'
  'GermanyWestCentral'
  'SwitzerlandNorth'
  'SwitzerlandWest'
  'NorwayEast'
  'NorwayWest'
  'SoutheastAsia'
  'EastAsia'
  'AustraliaEast'
  'AustraliaSoutheast'
  'AustraliaCentral'
  'AustraliaCentral2'
  'ChinaEast'
  'ChinaNorth'
  'ChinaEast2'
  'ChinaNorth2'
  'CentralIndia'
  'WestIndia'
  'SouthIndia'
  'JapanEast'
  'JapanWest'
  'KoreaCentral'
  'KoreaSouth'
  'SouthAfricaWest'
  'SouthAfricaNorth'
  'UAECentral'
  'UAENorth'
])
param targetResourceRegion string

@description('Resource type of target resources to be monitored.')
@minLength(1)
param targetResourceType string

@description('Name of the metric used in the comparison to activate the alert.')
@minLength(1)
param metricName string

@description('Operator comparing the current value with the threshold value.')
@allowed([
  'GreaterThan'
  'LessThan'
  'GreaterOrLessThan'
])
param operator string = 'GreaterOrLessThan'

@description('Tunes how \'noisy\' the Dynamic Thresholds alerts will be: \'High\' will result in more alerts while \'Low\' will result in fewer alerts.')
@allowed([
  'High'
  'Medium'
  'Low'
])
param alertSensitivity string = 'Medium'

@description('The number of periods to check in the alert evaluation.')
param numberOfEvaluationPeriods int = 4

@description('The number of unhealthy periods to alert on (must be lower or equal to numberOfEvaluationPeriods).')
param minFailingPeriodsToAlert int = 3

@description('How the data that is collected should be combined over time.')
@allowed([
  'Average'
  'Minimum'
  'Maximum'
  'Total'
  'Count'
])
param timeAggregation string = 'Average'

@description('Period of time used to monitor alert activity based on the threshold. Must be between five minutes and one hour. ISO 8601 duration format.')
@allowed([
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param windowSize string = 'PT5M'

@description('how often the metric alert is evaluated represented in ISO 8601 duration format')
@allowed([
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param evaluationFrequency string = 'PT5M'

@description('The ID of the action group that is triggered when the alert is activated or deactivated')
param actionGroupId string = ''

resource metricAlert 'Microsoft.Insights/metricAlerts@2018-03-01' = {
  name: alertName
  location: 'global'
  properties: {
    description: alertDescription
    severity: alertSeverity
    enabled: isEnabled
    scopes: [
      targetSubscription
    ]
    targetResourceType: targetResourceType
    targetResourceRegion: targetResourceRegion
    evaluationFrequency: evaluationFrequency
    windowSize: windowSize
    criteria: {
      'odata.type': 'Microsoft.Azure.Monitor.MultipleResourceMultipleMetricCriteria'
      allOf: [
        {
          criterionType: 'DynamicThresholdCriterion'
          name: '1st criterion'
          metricName: metricName
          dimensions: []
          operator: operator
          alertSensitivity: alertSensitivity
          failingPeriods: {
            numberOfEvaluationPeriods: numberOfEvaluationPeriods
            minFailingPeriodsToAlert: minFailingPeriodsToAlert
          }
          timeAggregation: timeAggregation
        }
      ]
    }
    actions: [
      {
        actionGroupId: actionGroupId
      }
    ]
  }
}

Fichier de paramètres

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "alertName": {
      "value": "Multi-resource sub level metric alert with Dynamic Thresholds via Azure Resource Manager template"
    },
    "alertDescription": {
      "value": "New Multi-resource sub level metric alert with Dynamic Thresholds created via template"
    },
    "alertSeverity": {
      "value": 3
    },
    "isEnabled": {
      "value": true
    },
    "targetSubscription": {
      "value": "/subscriptions/replace-with-subscription-id"
    },
    "targetResourceRegion": {
      "value": "SouthCentralUS"
    },
    "targetResourceType": {
      "value": "Microsoft.Compute/virtualMachines"
    },
    "metricName": {
      "value": "Percentage CPU"
    },
    "operator": {
      "value": "GreaterOrLessThan"
    },
    "alertSensitivity": {
      "value": "Medium"
    },
    "numberOfEvaluationPeriods": {
      "value": "4"
    },
    "minFailingPeriodsToAlert": {
      "value": "3"
    },
    "timeAggregation": {
      "value": "Average"
    },
    "actionGroupId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name/providers/Microsoft.Insights/actionGroups/replace-with-action-group-name"
    }
  }
}

Alerte de seuil statique sur une liste de machines virtuelles

Cet exemple crée une règle d’alerte de métrique de seuil statique qui supervise le pourcentage d’UC d’une liste de machines virtuelles dans une seule région Azure, dans un abonnement.

Fichier de modèle

@description('Name of the alert')
@minLength(1)
param alertName string

@description('Description of alert')
param alertDescription string = 'This is a metric alert'

@description('Severity of alert {0,1,2,3,4}')
@allowed([
  0
  1
  2
  3
  4
])
param alertSeverity int = 3

@description('Specifies whether the alert is enabled')
param isEnabled bool = true

@description('array of Azure resource Ids. For example - /subscriptions/00000000-0000-0000-0000-0000-00000000/resourceGroup/resource-group-name/Microsoft.compute/virtualMachines/vm-name')
@minLength(1)
param targetResourceId array

@description('Azure region in which target resources to be monitored are in (without spaces). For example: EastUS')
@allowed([
  'EastUS'
  'EastUS2'
  'CentralUS'
  'NorthCentralUS'
  'SouthCentralUS'
  'WestCentralUS'
  'WestUS'
  'WestUS2'
  'CanadaEast'
  'CanadaCentral'
  'BrazilSouth'
  'NorthEurope'
  'WestEurope'
  'FranceCentral'
  'FranceSouth'
  'UKWest'
  'UKSouth'
  'GermanyCentral'
  'GermanyNortheast'
  'GermanyNorth'
  'GermanyWestCentral'
  'SwitzerlandNorth'
  'SwitzerlandWest'
  'NorwayEast'
  'NorwayWest'
  'SoutheastAsia'
  'EastAsia'
  'AustraliaEast'
  'AustraliaSoutheast'
  'AustraliaCentral'
  'AustraliaCentral2'
  'ChinaEast'
  'ChinaNorth'
  'ChinaEast2'
  'ChinaNorth2'
  'CentralIndia'
  'WestIndia'
  'SouthIndia'
  'JapanEast'
  'JapanWest'
  'KoreaCentral'
  'KoreaSouth'
  'SouthAfricaWest'
  'SouthAfricaNorth'
  'UAECentral'
  'UAENorth'
])
param targetResourceRegion string

@description('Resource type of target resources to be monitored.')
@minLength(1)
param targetResourceType string

@description('Name of the metric used in the comparison to activate the alert.')
@minLength(1)
param metricName string

@description('Operator comparing the current value with the threshold value.')
@allowed([
  'Equals'
  'GreaterThan'
  'GreaterThanOrEqual'
  'LessThan'
  'LessThanOrEqual'
])
param operator string = 'GreaterThan'

@description('The threshold value at which the alert is activated.')
param threshold string = '0'

@description('How the data that is collected should be combined over time.')
@allowed([
  'Average'
  'Minimum'
  'Maximum'
  'Total'
  'Count'
])
param timeAggregation string = 'Average'

@description('Period of time used to monitor alert activity based on the threshold. Must be between one minute and one day. ISO 8601 duration format.')
@allowed([
  'PT1M'
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
  'PT6H'
  'PT12H'
  'PT24H'
])
param windowSize string = 'PT5M'

@description('how often the metric alert is evaluated represented in ISO 8601 duration format')
@allowed([
  'PT1M'
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param evaluationFrequency string = 'PT1M'

@description('The ID of the action group that is triggered when the alert is activated or deactivated')
param actionGroupId string = ''

resource metricAlert 'Microsoft.Insights/metricAlerts@2018-03-01' = {
  name: alertName
  location: 'global'
  properties: {
    description: alertDescription
    severity: alertSeverity
    enabled: isEnabled
    scopes: targetResourceId
    targetResourceType: targetResourceType
    targetResourceRegion: targetResourceRegion
    evaluationFrequency: evaluationFrequency
    windowSize: windowSize
    criteria: {
      'odata.type': 'Microsoft.Azure.Monitor.MultipleResourceMultipleMetricCriteria'
      allOf: [
        {
          name: '1st criterion'
          metricName: metricName
          dimensions: []
          operator: operator
          threshold: threshold
          timeAggregation: timeAggregation
          criterionType: 'StaticThresholdCriterion'
        }
      ]
    }
    actions: [
      {
        actionGroupId: actionGroupId
      }
    ]
  }
}

Fichier de paramètres

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "alertName": {
      "value": "Multi-resource metric alert by list via Azure Resource Manager template"
    },
    "alertDescription": {
      "value": "New Multi-resource metric alert by list created via template"
    },
    "alertSeverity": {
      "value": 3
    },
    "isEnabled": {
      "value": true
    },
    "targetResourceId": {
      "value": [
        "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name1/Microsoft.Compute/virtualMachines/replace-with-vm-name1",
        "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name2/Microsoft.Compute/virtualMachines/replace-with-vm-name2"
      ]
    },
    "targetResourceRegion": {
      "value": "SouthCentralUS"
    },
    "targetResourceType": {
      "value": "Microsoft.Compute/virtualMachines"
    },
    "metricName": {
      "value": "Percentage CPU"
    },
    "operator": {
      "value": "GreaterThan"
    },
    "threshold": {
      "value": 0
    },
    "timeAggregation": {
      "value": "Average"
    },
    "actionGroupId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name/providers/Microsoft.Insights/actionGroups/replace-with-action-group-name"
    }
  }
}

Alerte de seuil dynamique sur une liste de machines virtuelles

Cet exemple crée une règle d’alerte de métrique de seuil dynamique qui supervise le pourcentage d’UC d’une liste de machines virtuelles dans une seule région Azure, dans un abonnement.

Fichier de modèle

@description('Name of the alert')
@minLength(1)
param alertName string

@description('Description of alert')
param alertDescription string = 'This is a metric alert'

@description('Severity of alert {0,1,2,3,4}')
@allowed([
  0
  1
  2
  3
  4
])
param alertSeverity int = 3

@description('Specifies whether the alert is enabled')
param isEnabled bool = true

@description('array of Azure resource Ids. For example - /subscriptions/00000000-0000-0000-0000-0000-00000000/resourceGroup/resource-group-name/Microsoft.compute/virtualMachines/vm-name')
@minLength(1)
param targetResourceId array

@description('Azure region in which target resources to be monitored are in (without spaces). For example: EastUS')
@allowed([
  'EastUS'
  'EastUS2'
  'CentralUS'
  'NorthCentralUS'
  'SouthCentralUS'
  'WestCentralUS'
  'WestUS'
  'WestUS2'
  'CanadaEast'
  'CanadaCentral'
  'BrazilSouth'
  'NorthEurope'
  'WestEurope'
  'FranceCentral'
  'FranceSouth'
  'UKWest'
  'UKSouth'
  'GermanyCentral'
  'GermanyNortheast'
  'GermanyNorth'
  'GermanyWestCentral'
  'SwitzerlandNorth'
  'SwitzerlandWest'
  'NorwayEast'
  'NorwayWest'
  'SoutheastAsia'
  'EastAsia'
  'AustraliaEast'
  'AustraliaSoutheast'
  'AustraliaCentral'
  'AustraliaCentral2'
  'ChinaEast'
  'ChinaNorth'
  'ChinaEast2'
  'ChinaNorth2'
  'CentralIndia'
  'WestIndia'
  'SouthIndia'
  'JapanEast'
  'JapanWest'
  'KoreaCentral'
  'KoreaSouth'
  'SouthAfricaWest'
  'SouthAfricaNorth'
  'UAECentral'
  'UAENorth'
])
param targetResourceRegion string

@description('Resource type of target resources to be monitored.')
@minLength(1)
param targetResourceType string

@description('Name of the metric used in the comparison to activate the alert.')
@minLength(1)
param metricName string

@description('Operator comparing the current value with the threshold value.')
@allowed([
  'GreaterThan'
  'LessThan'
  'GreaterOrLessThan'
])
param operator string = 'GreaterOrLessThan'

@description('Tunes how \'noisy\' the Dynamic Thresholds alerts will be: \'High\' will result in more alerts while \'Low\' will result in fewer alerts.')
@allowed([
  'High'
  'Medium'
  'Low'
])
param alertSensitivity string = 'Medium'

@description('The number of periods to check in the alert evaluation.')
param numberOfEvaluationPeriods int = 4

@description('The number of unhealthy periods to alert on (must be lower or equal to numberOfEvaluationPeriods).')
param minFailingPeriodsToAlert int = 3

@description('How the data that is collected should be combined over time.')
@allowed([
  'Average'
  'Minimum'
  'Maximum'
  'Total'
  'Count'
])
param timeAggregation string = 'Average'

@description('Period of time used to monitor alert activity based on the threshold. Must be between five minutes and one hour. ISO 8601 duration format.')
@allowed([
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param windowSize string = 'PT5M'

@description('how often the metric alert is evaluated represented in ISO 8601 duration format')
@allowed([
  'PT5M'
  'PT15M'
  'PT30M'
  'PT1H'
])
param evaluationFrequency string = 'PT5M'

@description('The ID of the action group that is triggered when the alert is activated or deactivated')
param actionGroupId string = ''

resource metricAlert 'Microsoft.Insights/metricAlerts@2018-03-01' = {
  name: alertName
  location: 'global'
  properties: {
    description: alertDescription
    severity: alertSeverity
    enabled: isEnabled
    scopes: targetResourceId
    targetResourceType: targetResourceType
    targetResourceRegion: targetResourceRegion
    evaluationFrequency: evaluationFrequency
    windowSize: windowSize
    criteria: {
      'odata.type': 'Microsoft.Azure.Monitor.MultipleResourceMultipleMetricCriteria'
      allOf: [
        {
          criterionType: 'DynamicThresholdCriterion'
          name: '1st criterion'
          metricName: metricName
          dimensions: []
          operator: operator
          alertSensitivity: alertSensitivity
          failingPeriods: {
            numberOfEvaluationPeriods: numberOfEvaluationPeriods
            minFailingPeriodsToAlert: minFailingPeriodsToAlert
          }
          timeAggregation: timeAggregation
        }
      ]
    }
    actions: [
      {
        actionGroupId: actionGroupId
      }
    ]
  }
}

Fichier de paramètres

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "alertName": {
      "value": "Multi-resource metric alert with Dynamic Thresholds by list via Azure Resource Manager template"
    },
    "alertDescription": {
      "value": "New Multi-resource metric alert with Dynamic Thresholds by list created via template"
    },
    "alertSeverity": {
      "value": 3
    },
    "isEnabled": {
      "value": true
    },
    "targetResourceId": {
      "value": [
        "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name1/Microsoft.Compute/virtualMachines/replace-with-vm-name1",
        "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name2/Microsoft.Compute/virtualMachines/replace-with-vm-name2"
      ]
    },
    "targetResourceRegion": {
      "value": "SouthCentralUS"
    },
    "targetResourceType": {
      "value": "Microsoft.Compute/virtualMachines"
    },
    "metricName": {
      "value": "Percentage CPU"
    },
    "operator": {
      "value": "GreaterOrLessThan"
    },
    "alertSensitivity": {
      "value": "Medium"
    },
    "numberOfEvaluationPeriods": {
      "value": "4"
    },
    "minFailingPeriodsToAlert": {
      "value": "3"
    },
    "timeAggregation": {
      "value": "Average"
    },
    "actionGroupId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resource-group-name/providers/Microsoft.Insights/actionGroups/replace-with-action-group-name"
    }
  }
}

Test de disponibilité avec alerte de métrique

Les tests de disponibilité d’Application Insights vous aident à surveiller la disponibilité de votre site web ou application à partir de divers emplacements dans le monde. Les alertes de test de disponibilité vous informent quand des tests de disponibilité d’un certain nombre d’emplacements échouent. Alertes de test de disponibilité du même type de ressource que les alertes de métrique (Microsoft.Insights/metricAlerts). L’exemple suivant crée un test de disponibilité simple et une alerte associée.

Remarque

&amp ; référence d’entité HTML pour &. Les paramètres d’URL restent séparés par une perluète (&) mais, si vous mentionnez l’URL en HTML, vous devez l’encoder. Par conséquent, si vous avez une perluète « & » dans la valeur de votre paramètre pingURL, vous devez la faire précéder du caractère d’échappement « & ».

Fichier de modèle

param appName string
param pingURL string
param pingText string = ''
param actionGroupId string
param location string

var pingTestName = 'PingTest-${toLower(appName)}'
var pingAlertRuleName = 'PingAlert-${toLower(appName)}-${subscription().subscriptionId}'

resource pingTest 'Microsoft.Insights/webtests@2020-10-05-preview' = {
  name: pingTestName
  location: location
  tags: {
    'hidden-link:${resourceId('Microsoft.Insights/components', appName)}': 'Resource'
  }
  properties: {
    Name: pingTestName
    Description: 'Basic ping test'
    Enabled: true
    Frequency: 300
    Timeout: 120
    Kind: 'ping'
    RetryEnabled: true
    Locations: [
      {
        Id: 'us-va-ash-azr'
      }
      {
        Id: 'emea-nl-ams-azr'
      }
      {
        Id: 'apac-jp-kaw-edge'
      }
    ]
    Configuration: {
      WebTest: '<WebTest   Name="${pingTestName}"   Enabled="True"         CssProjectStructure=""    CssIteration=""  Timeout="120"  WorkItemIds=""         xmlns="http://microsoft.com/schemas/VisualStudio/TeamTest/2010"         Description=""  CredentialUserName=""  CredentialPassword=""         PreAuthenticate="True"  Proxy="default"  StopOnError="False"         RecordedResultFile=""  ResultsLocale="">  <Items>  <Request Method="GET"    Version="1.1"  Url="${pingURL}" ThinkTime="0"  Timeout="300" ParseDependentRequests="True"         FollowRedirects="True" RecordResult="True" Cache="False"         ResponseTimeGoal="0"  Encoding="utf-8"  ExpectedHttpStatusCode="200"         ExpectedResponseUrl="" ReportingName="" IgnoreHttpStatusCode="False" />        </Items>  <ValidationRules> <ValidationRule  Classname="Microsoft.VisualStudio.TestTools.WebTesting.Rules.ValidationRuleFindText, Microsoft.VisualStudio.QualityTools.WebTestFramework, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" DisplayName="Find Text"         Description="Verifies the existence of the specified text in the response."         Level="High"  ExecutionOrder="BeforeDependents">  <RuleParameters>        <RuleParameter Name="FindText" Value="${pingText}" />  <RuleParameter Name="IgnoreCase" Value="False" />  <RuleParameter Name="UseRegularExpression" Value="False" />  <RuleParameter Name="PassIfTextFound" Value="True" />  </RuleParameters> </ValidationRule>  </ValidationRules>  </WebTest>'
    }
    SyntheticMonitorId: pingTestName
  }
}

resource metricAlert 'Microsoft.Insights/metricAlerts@2018-03-01' = {
  name: pingAlertRuleName
  location: 'global'
  tags: {
    'hidden-link:${resourceId('Microsoft.Insights/components', appName)}': 'Resource'
    'hidden-link:${pingTest.id}': 'Resource'
  }
  properties: {
    description: 'Alert for web test'
    severity: 1
    enabled: true
    scopes: [
      pingTest.id
      resourceId('Microsoft.Insights/components', appName)
    ]
    evaluationFrequency: 'PT1M'
    windowSize: 'PT5M'
    criteria: {
      'odata.type': 'Microsoft.Azure.Monitor.WebtestLocationAvailabilityCriteria'
      webTestId: pingTest.id
      componentId: resourceId('Microsoft.Insights/components', appName)
      failedLocationCount: 2
    }
    actions: [
      {
        actionGroupId: actionGroupId
      }
    ]
  }
}

Fichier de paramètres

{
  "$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentParameters.json#",
  "contentVersion": "1.0.0.0",
  "parameters": {
    "appName": {
      "value": "Replace with your Application Insights resource name"
    },
    "pingURL": {
      "value": "https://www.yoursite.com"
    },
    "actionGroupId": {
      "value": "/subscriptions/replace-with-subscription-id/resourceGroups/replace-with-resourceGroup-name/providers/microsoft.insights/actiongroups/replace-with-action-group-name"
    },
    "location": {
      "value": "Replace with the location of your Application Insights resource"
    },
    "pingText": {
      "defaultValue": "Optional parameter that allows you to perform a content-match for the presence of a specific string within the content returned from a pingURL response",
      "type": "String"
    },
  }
}

La configuration supplémentaire du paramètre pingText de correspondance de contenu est contrôlée dans la partie Configuration/Webtest du fichier de modèle. Plus précisément, la section ci-dessous :

<RuleParameter Name=\"FindText\" Value=\"',parameters('pingText'), '\" />
<RuleParameter Name=\"IgnoreCase\" Value=\"False\" />
<RuleParameter Name=\"UseRegularExpression\" Value=\"False\" />
<RuleParameter Name=\"PassIfTextFound\" Value=\"True\" />

Emplacements du test

Id Région
emea-nl-ams-azr Europe Ouest
us-ca-sjc-azr USA Ouest
emea-ru-msa-edge Sud du Royaume-Uni
emea-se-sto-edge Ouest du Royaume-Uni
apac-sg-sin-azr Asie Sud-Est
us-tx-sn1-azr États-Unis - partie centrale méridionale
us-il-ch1-azr Centre-Nord des États-Unis
emea-gb-db3-azr Europe Nord
apac-jp-kaw-edge Japon Est
emea-fr-pra-edge France Centre
emea-ch-zrh-edge France Sud
us-va-ash-azr USA Est
apac-hk-hkn-azr Asie Est
us-fl-mia-edge USA Centre
latam-br-gru-edge Brésil Sud
emea-au-syd-edge Australie Est

Emplacements de test US Government

Id Région
usgov-va-azr USGov Virginia
usgov-phx-azr USGov Arizona
usgov-tx-azr USGov Texas
usgov-ddeast-azr USDoD East
usgov-ddcentral-azr USDoD Central

Étapes suivantes