Federated Security: How to setup and call a WCF service secured by ADFS 2.0

Article
08/17/2011

In this blog post I am going to walkthrough the steps required to secure a WCF service with ADFS 2.0, as well as how to call this service from a client. The aim of this article is to provide an outline of the general principals and steps, not to explain how to set up a fully secured scenario (everything in this post was tested across a couple of VMs on a development machine).

With federated security, there are two modes of authentication:

Passive. In this scenario, a client application (i.e. browser) tries to access a web resource (e.g. a webpage). If the client isn’t authenticated for that resource, it is redirected to a login page. On successful authentication, the client is redirected back to the original web resource and authorized as appropriate. Note that in this scenario, the client browser just needs to follow redirects etc. and does not need to use any special logic to authenticate. A more comprehensive explanation can be found here: https://msdn.microsoft.com/en-us/magazine/ff872350.aspx
Active. In this scenario, it is probable that the resource being accessed does not have a user interface (e.g a WCF / Rest service). The client application therefore needs to contain logic to authenticate against a Secure Token Store. Note that WCF does make provision for the active scenario through config (tutorial here: https://msdn.microsoft.com/en-us/gg557876). In our walkthrough below, however, we are going to authenticate programmatically.

This walkthrough was carried out on two VMs.

Server 1: Server 2008R2. Active Directory Domain Controller with IIS7 installed. It is assumed that an AD domain has been set up. This machine will be used to host ADFS2.0.
Server 2: Server 2008R2. IIS7 installed. This machine will be used to host our WCF service (note that this does not need to be joined to our domain).

Server 1: Prepare the default website to host the ADFS 2.0 endpoints.

When installed (later in this post), ADFS 2.0 creates endpoints under the default website. On the first VM (with AD installed), launch IIS Manager and ensure that the default website is running.
Ensure that you have a url that resolves to this machine (to be used for the ADFS 2.0 endpoints).
- In my environment, I added the following entry to your hosts file (C:\Windows\System32\drivers\etc): 127.0.0.1 adfs.testdomain.dev
- On a live environment, this should be done via DNS.
- Note that if you’re LAN connection uses a proxy server, you may need to bypass the proxy for the above address (i.e. IE –> Tools > Options >
As ADFS 2.0 endpoints should be run over https, ensure that you have a certificate setup (and it’s trusted). On a production environment this should be properly created and trusted, however on my dev environment I followed the instructions on https://www.robbagby.com/iis/self-signed-certificates-on-iis-7-the-easy-way-and-the-most-effective-way/ using SelfSSL.exe (note that selfssl is part of the IIS Resource Kit Toolkit).
- My specific command was “SelfSSL /N:CN=adfs.testdomain.dev /V:365 /S:1” (this create the certificate and configure the default website to use this certificate).

Server 1: Setting up ADFS 2.0

To set up ADFS 2.0, you first need to download it from https://www.microsoft.com/download/en/details.aspx?displaylang=en&id=10909. Once download, run through the following steps…

Run the setup wizard
On the first screen click next
Read and accept the license agreement
On the server role screen, select “Federation Server”
Click next to install.
Once it has run, you will need to restart the machine.

After it has installed, you now need to configure it

Launch AD FS 2.0 Management Tool from Start > Administrative Tools > AD FS 2.0 Management
Once loaded, select the AD FS 2.0 Federation Server Configuration Wizard (from the main panel)

Select create a new federation service and click next

Select “Stand-alone federation server” and click next

Accept the defaults for SSL certificates (this will be the certificate of you created earlier). Press next

Confirm the settings and press next.
Wait for the results.

Server 2: Setting up the website to host the WCF Service

On server 2, the WIF run time and SDK first needs to be installed.

WIF 4.0 Runtime - https://www.microsoft.com/download/en/details.aspx?displaylang=en&id=17331
WIF 4.0 SDK - https://www.microsoft.com/download/en/details.aspx?displaylang=en&id=4451

Next, if your not using a DNS server (i.e. you’re on a dev enviroment), edit C:\Windows\System32\drivers\etc\hosts and add the following entries:

adfs.testdomain.dev – 10.10.10.1 (set this to the IP address of the ADFS VM, aka Server 1)
services.testdomain.dev – 127.0.0.1

Next, create a website to host the WCF service:

In IIS Manager, right click on the site node in the connections pane and select “Add New Site”. Set the website settings as follows:
- SiteName: wcftestsite (lowercase)
- Physical Path: C:\inetpub\wwwroot\wcftestsite (you will need to create this folder)
- Binding (we will change this to https later)
  - Type: http
  - IP Address: All Unassigned
  - Port: 80
  - Host name: services.testdomain.dev (lowercase)
Once created, in IIS Manager, select the “Application Pool” node in the connections pane. Locate and select the newly created wcftestsite application pool.
- In the basic settings ensure that the application pool .NET framework version is set to v4.0
- In the “advanced settings” dialog. Under the process model section, change the identity to LocalSystem (this is so that it can access the ADFS certificate in the trusted root store). Note, on a production environment you would use a specific named account as opposed to this.
- In the “advanced settings” dialog. Under the process model section, set “Load User Profile” to true.

Next, we need to set up a trusted certificate for our new site. We will follow the steps as per server 1 to do this. My SelfSSL command is as follows: SelfSSL /N:CN=services.testdomain.dev /V:365 /S:2

Also, set IE to accept certificates as above to both services.testdomain.dev and adfs.testdomain.dev (as per server 1).

Server 2: Creating the WCF service

Open Visual Studio 2010
Select file > new > website
Select WCF Service from the project types
Set the web location to https://services.testdomain.dev/wcfservice and click ok (all lowercase)
Alter / add the following code to the GetData method on your WCF service. Browse to the service to ensure it no errors are thrown.

    1: public string GetData()
    2: {
    3:     var id = Thread.CurrentPrincipal.Identity as IClaimsIdentity;
    4:     return string.Format("Hello {0}", id.Claims[0].Value);
    5: }

In IIS Manager, select the newly created website and change the app pool to “wcftestsite”

Now the service has been created, it now needs to be altered to use ADFS 2.0.

In Visual Studio, right click on the project node for your WCF service website and select “Add STS Reference” (this is a new option provided by the WIF SDK)

Click next

Select the “Use an Existing STS” radio button
Set the url to https://adfs.testdomain.dev
Click test location (this should autocomplete the rest of the URL as per the screenshot below).
Click next

Set “Disable certificate chain validation” as we have created our own certificates.
Click next.

Select “Enable encryption” (wcf does not allow this to be disabled)
Select and existing certificate from store and select you “services.testdomain.dev” cert.
Click next
Leave offered claim as-is and click next
Verify the summary and click finish.
Once complete, a folder structure and a file named FederationMetadata.xml will be added to you website.

Server 1: Setup a trust relationship for our WCF service

Copy the newly created FederationMetadata.xml file create above to the ADFS VM
In ADFS2.0 Management console, from the tree right click on “Trust Relationships” and select “Add Relying Party Trust”.

Click start

Select “Import data about the relying party from a file” and select the FederationMetadata.xml file copied from the other server. Press next
Type the display name as “servicestestdomain” then click next
On the next screen, leave permit all users to access this relying party selected. Click next
Verify settings and click next
Leave the checkbox select for “Open the Edit Claim Rules dialog for this relying party trust when the wizard closes”. Click close.

Edit Claim Rules

On the edit claims rules dialog, verify that “Permit Access to All users” is set on the Issuance Authorization Rules tab
On the Issuance Tranform Rules tab, click add rule. Select “Pass Through or Filter an Incoming Claim”.
Set the claim rule name to “WCFServicePassthroughIncomingClaim”, on incoming claim type, select “Windows Account Name”.
Leave the radio button set as “pass through all claim values”
Click finish, then ok to save.

Server 2: Setup a test application to call the service

Run Visual Studio 2010 as an administrator (this should ensure that we have rights to see our newly created service). Open the solution that contains our WCF Service.
In our Visual Studio solution, create a console app named “WCFClient”. Set this as the startup project. Note that this can be totally separate to our solution, even on a different server – it just makes it easier to have them in the same place for this walkthrough.
Ensure that the target framework for this project is “.NET Framework 4.0” and not the “.NET Framework 4.0 Client Profile”.

Right click on this project and select “Add Service Reference”.
Set the address to https://services.testdomain.dev/wcfservice/service.svc and click discover. Note that we can still see the service as we are running as the user who created this account.

Set the namespace to MyTestService and click ok.
Add a couple of references:
- System.IdentityModel (.NET 4.0)
- Microsoft.IdentityModel
Add a new class called Token.cs to the project. This actively obtains the token from ADFS 2.0 (the secure token store). Add the following code to this class…

    1: using System;
    2: using System.Collections.Generic;
    3: using System.Linq;
    4: using System.Text;
    5: using System.IdentityModel.Tokens;
    6: using System.Net;
    7: using Microsoft.IdentityModel.Protocols.WSTrust;
    8: using System.ServiceModel;
    9: using System.ServiceModel.Security;
   10:  
   11: namespace WCFClient
   12: {
   13:     internal class Token
   14:     {
   15:         public static SecurityToken GetToken(string username, string password, string appliesTo, out RequestSecurityTokenResponse rsts)
   16:         {
   17:             WS2007HttpBinding binding = new WS2007HttpBinding();
   18:             binding.Security.Message.EstablishSecurityContext = false;
   19:             binding.Security.Transport.ClientCredentialType = HttpClientCredentialType.None;
   20:             binding.Security.Message.ClientCredentialType = MessageCredentialType.UserName;
   21:             binding.Security.Mode = SecurityMode.TransportWithMessageCredential; 
   22:  
   23:             WSTrustChannelFactory trustChannelFactory = new WSTrustChannelFactory(binding, new EndpointAddress("https://adfs.testdomain.dev/adfs/services/trust/13/usernamemixed"));
   24:             trustChannelFactory.TrustVersion = TrustVersion.WSTrust13;
   25:             trustChannelFactory.Credentials.UserName.UserName = username;
   26:             trustChannelFactory.Credentials.UserName.Password = password;
   27:             trustChannelFactory.ConfigureChannelFactory();
   28:  
   29:             // Create issuance issuance and get security token 
   30:             RequestSecurityToken requestToken = new RequestSecurityToken(WSTrust13Constants.RequestTypes.Issue);
   31:             requestToken.AppliesTo = new EndpointAddress(appliesTo);
   32:             WSTrustChannel tokenClient = (WSTrustChannel)trustChannelFactory.CreateChannel();
   33:             SecurityToken token = tokenClient.Issue(requestToken, out rsts);
   34:             return token;
   35:         }
   36:     }
   37: }

Add another class called FederatedWCFClient.cs to the project. This effectively wraps our service reference proxy class (autogenerated when we add our service reference), and allows it pass in a token to authenticate. Code for this is as follows:

    1: using System;
    2: using System.Collections.Generic;
    3: using System.Linq;
    4: using System.Text;
    5: using System.ServiceModel;
    6: using System.IdentityModel.Tokens;
    7: using Microsoft.IdentityModel.Protocols.WSTrust;
    8:  
    9: namespace WCFClient
   10: {
   11:     public class FederatedWCFClient<T>
   12:     {
   13:         private SecurityToken token;
   14:         private ChannelFactory<T> factory;
   15:         
   16:         public FederatedWCFClient(SecurityToken securityToken, string binding) 
   17:         {
   18:             this.token = securityToken;
   19:             this.factory = new ChannelFactory<T>(binding);
   20:             this.factory.ConfigureChannelFactory<T>();
   21:         }
   22:  
   23:         public void Close()
   24:         {
   25:             this.factory.Close();
   26:         }
   27:  
   28:         public T Client
   29:         {
   30:             get
   31:             {
   32:                 return this.factory.CreateChannelWithIssuedToken(token);
   33:             }
   34:         }
   35:  
   36:         public T ClientActAs
   37:         {
   38:             get
   39:             {
   40:                 return this.factory.CreateChannelActingAs(this.token);
   41:             }
   42:         }
   43:     }
   44: }

Finally, update our main method in Program.cs as follows (ensure that the binding name, endpoint and credentials are set up correctly).

    1: using System;
    2: using System.Collections.Generic;
    3: using System.Linq;
    4: using System.Text;
    5: using System.Net;
    6: using Microsoft.IdentityModel.Protocols.WSTrust;
    7:  
    8: namespace WCFClient
    9: {
   10:     class Program
   11:     {
   12:         static void Main(string[] args)
   13:         {
   14:             var requestTokenResponse = new RequestSecurityTokenResponse();
   15:             var token = Token.GetToken(@"mydomain\testuser", "p@ssw0rd", "https://services.testdomain.dev/wcfservice/Service.svc", out requestTokenResponse);
   16:             
   17:             var wcfClient = new FederatedWCFClient<MyTestService.IService>(token, "WS2007FederationHttpBinding_IService");   // This must match the app.config
   18:             var client = wcfClient.Client as MyTestService.IService;
   19:             var result = client.GetData();
   20:             Console.WriteLine(result);
   21:             wcfClient.Close();
   22:         }
   23:     }
   24: }

Now when you run the program, the client app will do the following

Obtain a token from ADFS
Call the WCF service method
Write the output of the WCF service method

Troubleshooting

The most common cause of error when creating this application was due to incorrect / inconsistent casing of the wcf service endpoint url. Verify case consistency of these.
ADFS 2.0 logs are visible in the Event Viewer (under “application and service logs”)
It can be useful turn on WCF logging WCF https://msdn.microsoft.com/en-us/library/aa702726.aspx. Logs can be opened in the Microsoft Service Trace Viewer (note that I normally use the message view within this – I locate errors, then view the exception tree for that error).
If when browsing to the WCF service endpoint, you receive “CryptographicException: Keyset does not exist” – this usually means the application pool does not trust the certificate. Check the WCF service is running under the correct application pool.

Thanks to Bradley Cotier for his debugging assistance

Written by Rob Nowik

Comments

Anonymous
October 02, 2012
Following your post, I have made WCF working without SSL; however, the process seems broken for SSL (https) based WCF. Do you have a post for WCF with SSL protected by AD FS 2.0?
Anonymous
March 04, 2014
Following all the steps I am getting Exception wsTrustSearializationException with message: ID3135: The element 'KeyType' with namespace 'docs.oasis-open.org/.../200512& has value '2' which is not an absolute URI. Searched for same but not getting any idea. Any help on this appreciated.
Anonymous
November 20, 2014
Very confusing guidance... Lost between server names and what you were doing where and why !
Anonymous
June 11, 2015
How to use WIF 4.5 framework for the same with ADFS 3.0
Anonymous
December 22, 2015
Bob, The exception message is: ID3242: The security token could not be authenticated or authorized. I did get conflicts in the Token class. Are the below the right namespaces? using System.ServiceModel.Security; using System.Web; using System.IdentityModel.Tokens; using System.IdentityModel.Protocols.WSTrust; //using Microsoft.IdentityModel.Protocols.WSTrust;

Partager via