Partager via


StringFormat.SetMeasurableCharacterRanges(CharacterRange[]) Méthode

Définition

Spécifie un tableau de structures CharacterRange qui représentent les plages de caractères mesurées par un appel à la méthode MeasureCharacterRanges(String, Font, RectangleF, StringFormat).

public:
 void SetMeasurableCharacterRanges(cli::array <System::Drawing::CharacterRange> ^ ranges);
public void SetMeasurableCharacterRanges (System.Drawing.CharacterRange[] ranges);
member this.SetMeasurableCharacterRanges : System.Drawing.CharacterRange[] -> unit
Public Sub SetMeasurableCharacterRanges (ranges As CharacterRange())

Paramètres

ranges
CharacterRange[]

Tableau de structures CharacterRange qui spécifie les plages de caractères mesurées par un appel à la méthode MeasureCharacterRanges(String, Font, RectangleF, StringFormat).

Exceptions

Plus de 32 plages de caractères sont définies.

Exemples

L’exemple suivant est conçu pour une utilisation avec Windows Forms et nécessite PaintEventArgse, qui est un paramètre du gestionnaire d’événements Paint. Le code effectue les actions suivantes :

  • Définit les plages de caractères du StringFormat.

  • Mesure les plages de caractères pour un rectangle de chaîne et de disposition donné.

  • Dessine la chaîne et le rectangle de disposition.

  • Peint les régions. Chaque Region spécifie une zone occupée par une plage de caractères. Les valeurs des régions sont définies lorsque les plages de caractères sont mesurées par la méthode MeasureCharacterRanges.

  • Répète les quatre premières étapes, mais inclut des espaces de fin dans la mesure de chaque plage de caractères.

  • Efface les indicateurs de format de la StringFormat afin que les espaces de fin ne soient pas inclus dans la mesure de chaque plage de caractères.

  • Répète les quatre premières étapes, mais utilise simplement un rectangle de disposition différent pour démontrer que le rectangle de disposition affecte les mesures des plages de caractères. La taille de la police affecte également la mesure.

void SetMeasCharRangesExample( PaintEventArgs^ e )
{
   Graphics^ g = e->Graphics;
   SolidBrush^ redBrush = gcnew SolidBrush( Color::FromArgb( 50, 255, 0, 0 ) );

   // Layout rectangles, font, and string format used for displaying string.
   Rectangle layoutRectA = Rectangle(20,20,165,80);
   Rectangle layoutRectB = Rectangle(20,110,165,80);
   Rectangle layoutRectC = Rectangle(20,200,240,80);
   System::Drawing::Font^ tnrFont = gcnew System::Drawing::Font( "Times New Roman",16 );
   StringFormat^ strFormat = gcnew StringFormat;

   // Ranges of character positions within a string.
   array<CharacterRange>^ charRanges = {CharacterRange(3,5),CharacterRange(15,2),CharacterRange(30,15)};

   // Each region specifies the area occupied by the characters within a
   // range of positions. the values are obtained by using a method that
   // measures the character ranges.
   array<System::Drawing::Region^>^charRegions = gcnew array<System::Drawing::Region^>(charRanges->Length);

   // String to be displayed.
   String^ str = "The quick, brown fox easily jumps over the lazy dog.";

   // Set the char ranges for the string format.
   strFormat->SetMeasurableCharacterRanges( charRanges );

   // loop counter (unsigned 8-bit integer)
   Byte i;

   // Measure the char ranges for a given string and layout rectangle. Each
   // area occupied by the characters in a range is stored as a region. Then
   // draw the string and layout rectangle, and paint the regions.
   charRegions = g->MeasureCharacterRanges( str, tnrFont, layoutRectA, strFormat );
   g->DrawString( str, tnrFont, Brushes::Blue, layoutRectA, strFormat );
   g->DrawRectangle( Pens::Black, layoutRectA );

   // Paint the regions.
   for ( i = 0; i < charRegions->Length; i++ )
      g->FillRegion( redBrush, charRegions[ i ] );

   // Repeat the above steps, but include trailing spaces in the char
   // range measurement by setting the appropriate string format flag.
   strFormat->FormatFlags = StringFormatFlags::MeasureTrailingSpaces;
   charRegions = g->MeasureCharacterRanges( str, tnrFont, layoutRectB, strFormat );
   g->DrawString( str, tnrFont, Brushes::Blue, layoutRectB, strFormat );
   g->DrawRectangle( Pens::Black, layoutRectB );
   for ( i = 0; i < charRegions->Length; i++ )
      g->FillRegion( redBrush, charRegions[ i ] );

   // Clear all the format flags.
   strFormat->FormatFlags = StringFormatFlags(0);

   // Repeat the steps, but use a different layout rectangle. the dimensions
   // of the layout rectangle and the size of the font both affect the
   // character range measurement.
   charRegions = g->MeasureCharacterRanges( str, tnrFont, layoutRectC, strFormat );
   g->DrawString( str, tnrFont, Brushes::Blue, layoutRectC, strFormat );
   g->DrawRectangle( Pens::Black, layoutRectC );

   // Paint the regions.
   for ( i = 0; i < charRegions->Length; i++ )
      g->FillRegion( redBrush, charRegions[ i ] );
}
public void SetMeasCharRangesExample(PaintEventArgs e)
{
    Graphics     g = e.Graphics;
    SolidBrush   redBrush = new SolidBrush(Color.FromArgb(50, 255, 0, 0));
             
    // Layout rectangles, font, and string format used for displaying string.
    Rectangle    layoutRectA = new Rectangle(20, 20, 165, 80);
    Rectangle    layoutRectB = new Rectangle(20, 110, 165, 80);
    Rectangle    layoutRectC = new Rectangle(20, 200, 240, 80);
    Font         tnrFont = new Font("Times New Roman", 16);
    StringFormat strFormat = new StringFormat();
             
    // Ranges of character positions within a string.
    CharacterRange[] charRanges = { new CharacterRange(3, 5),
        new CharacterRange(15, 2), new CharacterRange(30, 15)};
             
    // Each region specifies the area occupied by the characters within a
    // range of positions. the values are obtained by using a method that
    // measures the character ranges.
    Region[]     charRegions = new Region[charRanges.Length];
             
    // String to be displayed.
    string  str =
        "The quick, brown fox easily jumps over the lazy dog.";
             
    // Set the char ranges for the string format.
    strFormat.SetMeasurableCharacterRanges(charRanges);
   
    // loop counter (unsigned 8-bit integer)
    byte  i;    
   
    // Measure the char ranges for a given string and layout rectangle. Each
    // area occupied by the characters in a range is stored as a region. Then
    // draw the string and layout rectangle, and paint the regions.
    charRegions = g.MeasureCharacterRanges(str, tnrFont,
        layoutRectA, strFormat);
   g.DrawString(str, tnrFont, Brushes.Blue, layoutRectA, strFormat);
    g.DrawRectangle(Pens.Black, layoutRectA);
     
    // Paint the regions.
    for (i = 0; i < charRegions.Length; i++)
        g.FillRegion(redBrush, charRegions[i]);   

    // Repeat the above steps, but include trailing spaces in the char
    // range measurement by setting the appropriate string format flag.
    strFormat.FormatFlags = StringFormatFlags.MeasureTrailingSpaces;
    charRegions = g.MeasureCharacterRanges(str, tnrFont,
        layoutRectB, strFormat);
    g.DrawString(str, tnrFont, Brushes.Blue, layoutRectB, strFormat);
    g.DrawRectangle(Pens.Black, layoutRectB);

    for (i = 0; i < charRegions.Length; i++)
        g.FillRegion(redBrush, charRegions[i]);   
   
    // Clear all the format flags.
    strFormat.FormatFlags = 0;                   
 
    // Repeat the steps, but use a different layout rectangle. the dimensions
    // of the layout rectangle and the size of the font both affect the
    // character range measurement.
    charRegions = g.MeasureCharacterRanges(str, tnrFont,
        layoutRectC, strFormat);
    g.DrawString(str, tnrFont, Brushes.Blue, layoutRectC, strFormat);
    g.DrawRectangle(Pens.Black, layoutRectC);
    
    // Paint the regions.
    for (i = 0; i < charRegions.Length; i++)
        g.FillRegion(redBrush, charRegions[i]);   
}
Public Sub SetMeasCharRangesExample(ByVal e As PaintEventArgs)
    Dim g As Graphics = e.Graphics
    Dim redBrush As New SolidBrush(Color.FromArgb(50, 255, 0, 0))

    ' Layout rectangles, font, and string format used for
    ' displaying string.
    Dim layoutRectA As New Rectangle(20, 20, 165, 80)
    Dim layoutRectB As New Rectangle(20, 110, 165, 80)
    Dim layoutRectC As New Rectangle(20, 200, 240, 80)
    Dim tnrFont As New Font("Times New Roman", 16)
    Dim strFormat As New StringFormat

    ' Ranges of character positions within a string.
    Dim charRanges As CharacterRange() = {New CharacterRange(3, 5), _
    New CharacterRange(15, 2), New CharacterRange(30, 15)}

    ' Each region specifies the area occupied by the characters within
    ' a range of positions. The values are obtained by using a method
    ' that measures the character ranges.
    Dim charRegions(charRanges.Length) As [Region]

    ' String to be displayed.
    Dim str As String = _
    "The quick, brown fox easily jumps over the lazy dog."

    ' Set the char ranges for the string format.
    strFormat.SetMeasurableCharacterRanges(charRanges)

    ' Loop counter (unsigned 8-bit integer).
    Dim i As Byte


    ' Measure the char ranges for a given string and layout rectangle.
    ' Each area occupied by the characters in a range is stored as a
    ' region. then draw the string and layout rectangle and paint the
    ' regions.
    charRegions = g.MeasureCharacterRanges(str, tnrFont, _
    RectangleF.op_Implicit(layoutRectA), strFormat)
    g.DrawString(str, tnrFont, Brushes.Blue, _
    RectangleF.op_Implicit(layoutRectA), strFormat)
    g.DrawRectangle(Pens.Black, layoutRectA)

    ' Paint the regions.
    For i = 0 To charRegions.Length - 1
        g.FillRegion(redBrush, charRegions(i))
    Next i

    ' Repeat the above steps, but include trailing spaces in the char
    ' range measurement by setting the appropriate string format flag.
    strFormat.FormatFlags = StringFormatFlags.MeasureTrailingSpaces
    charRegions = g.MeasureCharacterRanges(str, tnrFont, _
    RectangleF.op_Implicit(layoutRectB), strFormat)
    g.DrawString(str, tnrFont, Brushes.Blue, _
    RectangleF.op_Implicit(layoutRectB), strFormat)
    g.DrawRectangle(Pens.Black, layoutRectB)

    ' Paint the regions.
    For i = 0 To charRegions.Length - 1
        g.FillRegion(redBrush, charRegions(i))
    Next i

    ' Clear all the format flags.
    strFormat.FormatFlags = 0

    ' Repeat the steps, but use a different layout rectangle. The
    ' dimensions of the layout rectangle and the size of the font both
    ' affect the character range measurement.
    charRegions = g.MeasureCharacterRanges(str, tnrFont, _
    RectangleF.op_Implicit(layoutRectC), strFormat)
    g.DrawString(str, tnrFont, Brushes.Blue, _
    RectangleF.op_Implicit(layoutRectC), strFormat)
    g.DrawRectangle(Pens.Black, layoutRectC)

    ' Paint the regions.
    For i = 0 To charRegions.Length - 1
        g.FillRegion(redBrush, charRegions(i))
    Next i
End Sub

Remarques

La définition de plus de 32 plages de caractères n’est pas autorisée et provoque une System.OverflowException.

S’applique à