Modifier

Partager via


New-AzDnsRecordSet

Creates a DNS record set.

Syntax

New-AzDnsRecordSet
   -Name <String>
   -ZoneName <String>
   -ResourceGroupName <String>
   -Ttl <UInt32>
   -RecordType <RecordType>
   [-Metadata <Hashtable>]
   [-DnsRecords <DnsRecordBase[]>]
   [-Overwrite]
   [-DefaultProfile <IAzureContextContainer>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
New-AzDnsRecordSet
   -Name <String>
   -ZoneName <String>
   -ResourceGroupName <String>
   [-Ttl <UInt32>]
   -RecordType <RecordType>
   -TargetResourceId <String>
   [-Metadata <Hashtable>]
   [-DnsRecords <DnsRecordBase[]>]
   [-Overwrite]
   [-DefaultProfile <IAzureContextContainer>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
New-AzDnsRecordSet
   -Name <String>
   -Zone <DnsZone>
   -Ttl <UInt32>
   -RecordType <RecordType>
   [-Metadata <Hashtable>]
   [-DnsRecords <DnsRecordBase[]>]
   [-Overwrite]
   [-DefaultProfile <IAzureContextContainer>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
New-AzDnsRecordSet
   -Name <String>
   -Zone <DnsZone>
   [-Ttl <UInt32>]
   -RecordType <RecordType>
   -TargetResourceId <String>
   [-Metadata <Hashtable>]
   [-DnsRecords <DnsRecordBase[]>]
   [-Overwrite]
   [-DefaultProfile <IAzureContextContainer>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

The New-AzDnsRecordSet cmdlet creates a new Domain Name System (DNS) record set with the specified name and type in the specified zone. A RecordSet object is a set of DNS records with the same name and type. Note that the name is relative to the zone and not the fully qualified name. The DnsRecords parameter specifies the records in the record set. This parameter takes an array of DNS records, constructed using New-AzDnsRecordConfig. You can use the pipeline operator to pass a DnsZone object to this cmdlet, or you can pass a DnsZone object as the Zone parameter, or alternatively you can specify the zone by name. You can use the Confirm parameter and $ConfirmPreference Windows PowerShell variable to control whether the cmdlet prompts you for confirmation. If a matching RecordSet already exists (same name and record type), you must specify the Overwrite parameter, otherwise the cmdlet will not create a new RecordSet .

Examples

Example 1: Create a RecordSet of type A

$Records = @()
$Records += New-AzDnsRecordConfig -IPv4Address 1.2.3.4
$RecordSet = New-AzDnsRecordSet -Name "www" -RecordType A -ResourceGroupName "MyResourceGroup" -TTL 3600 -ZoneName "myzone.com" -DnsRecords $Records

# When creating a RecordSet containing a single record, the above sequence can also be condensed into a single line:

$RecordSet = New-AzDnsRecordSet -Name "www" -RecordType A -ResourceGroupName "MyResourceGroup" -TTL 3600 -ZoneName "myzone.com" -DnsRecords (New-AzDnsRecordConfig -IPv4Address 1.2.3.4)

# To create a record set containing multiple records, use New-AzDnsRecordConfig to add each record to the $Records array,
# then call New-AzDnsRecordSet, as follows:

$Records = @()
$Records += New-AzDnsRecordConfig -IPv4Address 1.2.3.4
$Records += New-AzDnsRecordConfig -IPv4Address 5.6.7.8
$RecordSet = New-AzDnsRecordSet -Name "www" -RecordType A -ResourceGroupName "MyResourceGroup" -TTL 3600 -ZoneName "myzone.com" -DnsRecords $Records

This example creates a RecordSet named www in the zone myzone.com. The record set is of type A and has a TTL of 1 hour (3600 seconds). It contains a single DNS record.

Example 2: Create a RecordSet of type AAAA

$Records = @()
$Records += New-AzDnsRecordConfig -Ipv6Address 2001:db8::1
$RecordSet = New-AzDnsRecordSet -Name "www" -RecordType AAAA -ResourceGroupName "MyResourceGroup" -TTL 3600 -ZoneName "myzone.com" -DnsRecords $Records

This example creates a RecordSet named www in the zone myzone.com. The record set is of type AAAA and has a TTL of 1 hour (3600 seconds). It contains a single DNS record. To create a RecordSet using only one line of pn_PowerShell_short, or to create a record set with multiple records, see Example 1.

Example 3: Create a RecordSet of type CNAME

$Records = @()
$Records += New-AzDnsRecordConfig -Cname www.contoso.com
$RecordSet = New-AzDnsRecordSet -Name "www" -RecordType CNAME -ResourceGroupName "MyResourceGroup" -TTL 3600 -ZoneName "myzone.com" -DnsRecords $Records

This example creates a RecordSet named www in the zone myzone.com. The record set is of type CNAME and has a TTL of 1 hour (3600 seconds). It contains a single DNS record. To create a RecordSet using only one line of pn_PowerShell_short, or to create a record set with multiple records, see Example 1.

Example 4: Create a RecordSet of type MX

$Records = @()
$Records += New-AzDnsRecordConfig -Exchange "mail.microsoft.com" -Preference 5
$RecordSet = New-AzDnsRecordSet -Name "mail" -RecordType MX -ResourceGroupName "MyResourceGroup" -TTL 3600 -ZoneName "myzone.com" -DnsRecords $Records

This command creates a RecordSet named www in the zone myzone.com. The record set is of type MX and has a TTL of 1 hour (3600 seconds). It contains a single DNS record. To create a RecordSet using only one line of pn_PowerShell_short, or to create a record set with multiple records, see Example 1.

Example 5: Create a RecordSet of type NS

$Records = @()
$Records += New-AzDnsRecordConfig -Nsdname ns1-01.azure-dns.com
$RecordSet = New-AzDnsRecordSet -Name "ns1" -RecordType NS -ResourceGroupName "MyResourceGroup" -TTL 3600 -ZoneName "myzone.com" -DnsRecords $Records

This command creates a RecordSet named ns1 in the zone myzone.com. The record set is of type NS and has a TTL of 1 hour (3600 seconds). It contains a single DNS record. To create a RecordSet using only one line of pn_PowerShell_short, or to create a record set with multiple records, see Example 1.

Example 6: Create a RecordSet of type PTR

$Records = @()
$Records += New-AzDnsRecordConfig -Ptrdname www.contoso.com
$RecordSet = New-AzDnsRecordSet -Name "4" -RecordType PTR -ResourceGroupName "MyResourceGroup" -TTL 3600 -ZoneName "3.2.1.in-addr.arpa" -DnsRecords $Records

This command creates a RecordSet named 4 in the zone 3.2.1.in-addr.arpa. The record set is of type PTR and has a TTL of 1 hour (3600 seconds). It contains a single DNS record. To create a RecordSet using only one line of pn_PowerShell_short, or to create a record set with multiple records, see Example 1.

Example 7: Create a RecordSet of type SRV

$Records = @()
$Records += New-AzDnsRecordConfig -Priority 0 -Weight 5 -Port 8080 -Target sipservice.contoso.com
$RecordSet = New-AzDnsRecordSet -Name "_sip._tcp" -RecordType SRV -ResourceGroupName "MyResourceGroup" -TTL 3600 -ZoneName "myzone.com" -DnsRecords $Records

This command creates a RecordSet named _sip._tcp in the zone myzone.com. The record set is of type SRV and has a TTL of 1 hour (3600 seconds). It contains a single DNS record, pointing to the IP address 2001.2.3.4. The service (sip) and the protocol (tcp) are specified as part of the record set name, not as part of the record data. To create a RecordSet using only one line of pn_PowerShell_short, or to create a record set with multiple records, see Example 1.

Example 8: Create a RecordSet of type TXT

$Records = @()
$Records += New-AzDnsRecordConfig -Value "This is a TXT Record"
$RecordSet = New-AzDnsRecordSet -Name "text" -RecordType TXT -ResourceGroupName "MyResourceGroup" -TTL 3600 -ZoneName "myzone.com" -DnsRecords $Records

This command creates a RecordSet named text in the zone myzone.com. The record set is of type TXT and has a TTL of 1 hour (3600 seconds). It contains a single DNS record. To create a RecordSet using only one line of pn_PowerShell_short, or to create a record set with multiple records, see Example 1.

Example 9: Create a RecordSet at the zone apex

$Records = @()
$Records += New-AzDnsRecordConfig -Ipv4Address 1.2.3.4
$RecordSet = New-AzDnsRecordSet -Name "@" -RecordType A -ResourceGroupName "MyResourceGroup" -TTL 3600 -ZoneName "myzone.com" -DnsRecords $Records

This command creates a RecordSet at the apex (or root) of the zone myzone.com. To do this, the record set name is specified as "@" (including the double-quotes). You cannot create CNAME records at the apex of a zone. This is a constraint of the DNS standards; it is not a limitation of Azure DNS. To create a RecordSet using only one line of pn_PowerShell_short, or to create a record set with multiple records, see Example 1.

Example 10: Create a wildcard Record Set

$Records = @()
$Records += New-AzDnsRecordConfig -Ipv4Address 1.2.3.4
$RecordSet = New-AzDnsRecordSet -Name "*" -RecordType A -ResourceGroupName "MyResourceGroup" -TTL 3600 -ZoneName "myzone.com" -DnsRecords $Records

This command creates a RecordSet named * in the zone myzone.com. This is a wildcard record set. To create a RecordSet using only one line of pn_PowerShell_short, or to create a record set with multiple records, see Example 1.

Example 11: Create an empty record set

$RecordSet = New-AzDnsRecordSet -Name "www" -RecordType A -ResourceGroupName "MyResourceGroup" -TTL 3600 -ZoneName "myzone.com" -DnsRecords @()

This command creates a RecordSet named www in the zone myzone.com. The record set is of type A and has a TTL of 1 hour (3600 seconds). This is an empty record set, which acts as a placeholder to which you can later add records.

Example 12: Create a record set and suppress all confirmation

$RecordSet = New-AzDnsRecordSet -Name "www" -RecordType A -ResourceGroupName "MyResourceGroup" -TTL 3600 -ZoneName "myzone.com" -DnsRecords (New-AzDnsRecordConfig -Ipv4Address 1.2.3.4) -Confirm:$False -Overwrite

This command creates a RecordSet. The Overwrite parameter ensures that this record set overwrites any pre-existing record set with the same name and type (existing records in that record set are lost). The Confirm parameter with a value of $False suppresses the confirmation prompt.

Parameters

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-DefaultProfile

The credentials, account, tenant, and subscription used for communication with azure

Type:IAzureContextContainer
Aliases:AzContext, AzureRmContext, AzureCredential
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-DnsRecords

Specifies the array of DNS records to include in the record set. You can use the New-AzDnsRecordConfig cmdlet to create DNS record objects. See the examples for more information.

Type:DnsRecordBase[]
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-Metadata

Specifies an array of metadata to associate with the RecordSet. Metadata is specified using name-value pairs that are represented as hash tables, for example @{"dept"="shopping";"env"="production"}.

Type:Hashtable
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-Name

Specifies the name of the RecordSet to create.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-Overwrite

Indicates that this cmdlet overwrites the specified RecordSet if it already exists.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RecordType

Specifies the type of DNS record to create. Valid values are:

  • A
  • AAAA
  • CNAME
  • MX
  • NS
  • PTR
  • SRV
  • TXT SOA records are created automatically when the zone is created and cannot be created manually.
Type:RecordType
Accepted values:A, Aaaa, CAA, Cname, MX, NS, PTR, SOA, SRV, TXT, Tlsa, DS, Naptr
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-ResourceGroupName

Specifies the resource group that contains the DNS zone. You must also specify the ZoneName parameter to specify the zone name. Alternatively, you can specify the zone and resource group by passing in a DNS Zone object using the Zone parameter.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-TargetResourceId

Alias Target Resource Id.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-Ttl

Specifies the Time to Live (TTL) for the DNS RecordSet.

Type:UInt32
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Zone

Specifies the DnsZone in which to create the RecordSet. Alternatively, you can specify the zone using the ZoneName and ResourceGroupName parameters.

Type:DnsZone
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-ZoneName

Specifies the name of the zone in which to create the RecordSet. You must also specify the resource group containing the zone using the ResourceGroupName parameter. Alternatively, you can specify the zone and resource group by passing in a DNS Zone object using the Zone parameter.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

Inputs

String

DnsZone

UInt32

RecordType

Hashtable

DnsRecordBase[]

Outputs

DnsRecordSet

Notes

You can use the Confirm parameter to control whether this cmdlet prompts you for confirmation. By default, the cmdlet prompts you for confirmation if the $ConfirmPreference Windows PowerShell variable has a value of Medium or lower. If you specify Confirm or Confirm:$True, this cmdlet prompts you for confirmation before it runs. If you specify Confirm:$False, the cmdlet does not prompt you for confirmation.