Remove-VMNetworkAdapterAcl
Removes an ACL applied to the traffic through a virtual network adapter.
Syntax
Remove-VMNetworkAdapterAcl
[-VMNetworkAdapterName <String>]
[-CimSession <CimSession[]>]
[-ComputerName <String[]>]
[-Credential <PSCredential[]>]
[-VMName] <String[]>
-Action <VMNetworkAdapterAclAction>
-Direction <VMNetworkAdapterAclDirection>
[-LocalIPAddress <String[]>]
[-LocalMacAddress <String[]>]
[-RemoteIPAddress <String[]>]
[-RemoteMacAddress <String[]>]
[-Passthru]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Remove-VMNetworkAdapterAcl
[-VMNetworkAdapter] <VMNetworkAdapterBase[]>
-Action <VMNetworkAdapterAclAction>
-Direction <VMNetworkAdapterAclDirection>
[-LocalIPAddress <String[]>]
[-LocalMacAddress <String[]>]
[-RemoteIPAddress <String[]>]
[-RemoteMacAddress <String[]>]
[-Passthru]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Remove-VMNetworkAdapterAcl
[-ManagementOS]
[-VMNetworkAdapterName <String>]
[-CimSession <CimSession[]>]
[-ComputerName <String[]>]
[-Credential <PSCredential[]>]
-Action <VMNetworkAdapterAclAction>
-Direction <VMNetworkAdapterAclDirection>
[-LocalIPAddress <String[]>]
[-LocalMacAddress <String[]>]
[-RemoteIPAddress <String[]>]
[-RemoteMacAddress <String[]>]
[-Passthru]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Remove-VMNetworkAdapterAcl
[-VMNetworkAdapterName <String>]
[-VM] <VirtualMachine[]>
-Action <VMNetworkAdapterAclAction>
-Direction <VMNetworkAdapterAclDirection>
[-LocalIPAddress <String[]>]
[-LocalMacAddress <String[]>]
[-RemoteIPAddress <String[]>]
[-RemoteMacAddress <String[]>]
[-Passthru]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Remove-VMNetworkAdapterAcl
[-InputObject] <VMNetworkAdapterAclSetting[]>
[-Passthru]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Description
The Remove-VMNetworkAdapterAcl cmdlet removes an ACL applied to the traffic through a virtual network adapter.
Examples
Example 1
PS C:\> Remove-VMNetworkAdapterAcl -VMName Redmond -RemoteIPAddress 0.0.0.0/0 -Direction Both -Action Allow
Removes from virtual machine Redmond the ACL allowing any IPv4 traffic sent from or to the virtual machine.
Example 2
PS C:\> Remove-VMNetworkAdapterAcl -VMName Redmond -RemoteIPAddress ::/0 -Direction Both -Action Allow
Removes from virtual machine Redmond the ACL that allows any IPv6 traffic sent from and to the virtual machine.
Example 3
PS C:\> Remove-VMNetworkAdapterAcl -VMName Redmond -RemoteMacAddress 03-0f-01-0e-aa-b2 -Direction Both -Action Deny
Removes the MAC ACL to prevent virtual machine Redmond from sending traffic to or receiving traffic from a remote device with MAC address 03-0f-01-0e-aa-b2.
Example 4
PS C:\> Get-VMNetworkAdapterAcl -VMName Redmond | Remove-VMNetworkAdapterAcl
Retrieves all the port ACLs configured for virtual machine Redmond and pipelines them to Remove-VMNetworkAdapterAcl, which removes all of them from the virtual machine.
Parameters
-Action
Specifies the action of the ACL to be removed. Allowed values are Allow, Deny, and Meter.
Type: | VMNetworkAdapterAclAction |
Accepted values: | Allow, Deny, Meter |
Position: | Named |
Default value: | None |
Required: | True |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
Type: | CimSession[] |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-ComputerName
Specifies one or more Hyper-V hosts on which the ACL applied to a virtual machine network adapter is to be removed. NetBIOS names, IP addresses, and fully qualified domain names are allowable. The default is the local computer. Use localhost or a dot (.) to specify the local computer explicitly.
Type: | String[] |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
Type: | SwitchParameter |
Aliases: | cf |
Position: | Named |
Default value: | False |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-Credential
Specifies one or more user accounts that have permission to perform this action. The default is the current user.
Type: | PSCredential[] |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-Direction
The direction of the network traffic (from the perspective of the virtual machine) to which the ACL applies. Allowed values are Inbound, Outbound, or Both.
Type: | VMNetworkAdapterAclDirection |
Accepted values: | Inbound, Outbound, Both |
Position: | Named |
Default value: | None |
Required: | True |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-InputObject
Specifies the ACL to be removed.
Type: | VMNetworkAdapterAclSetting[] |
Position: | 0 |
Default value: | None |
Required: | True |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-LocalIPAddress
Specifies the local IP address. It can be either IPv4 or IPv6 address. It can be either a host address or a subnet address, e.g. 1.2.3.4, 2001::2008, 192.168.1.0/24, or f001:f002:f003:f004::1/64.the IP address can also be a wildcard, 0.0.0.0/0 for all IPv4 addresses, ::/0 for all IPv6 addresses, or ANY for all IPv4 and IPv6 addresses.
Type: | String[] |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-LocalMacAddress
Specifies the local MAC address (e.g. 00-ab-00-11-22-33). Use the wildcard ANY to specify all MAC addresses.
Type: | String[] |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-ManagementOS
Specifies that the ACL is to be removed from the management (e.g. the parent, or host) operating system.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | True |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-Passthru
Specifies that a Microsoft.HyperV.PowerShell.VMNetworkAdapterAclSetting object is to be passed through to the pipeline representing the ACL to be removed.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-RemoteIPAddress
Specifies the remote IP address. . It can be either IPv4 or IPv6 address. It can be either a host address or a subnet address, e.g. 1.2.3.4, 2001::2008, 192.168.1.0/24, or f001:f002:f003:f004::1/64. the IP address can also be a wildcard, 0.0.0.0/0 for all IPv4 addresses, ::/0 for all IPv6 addresses, or ANY for all IPv4 and IPv6 addresses.
Type: | String[] |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-RemoteMacAddress
Specifies the remote MAC address. . It can be a host MAC address, e.g. 00-ab-00-11-22-33, or a wildcard, ANY, for all MAC addresses.
Type: | String[] |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-VM
Specifies the virtual machine from which the ACL is to be removed.
Type: | VirtualMachine[] |
Position: | 0 |
Default value: | None |
Required: | True |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-VMName
Specifies the name of the virtual machine from which the ACL is to be removed.
Type: | String[] |
Position: | 0 |
Default value: | None |
Required: | True |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-VMNetworkAdapter
Specifies the virtual machine network adapter from which ACL is to be removed.
Type: | VMNetworkAdapterBase[] |
Position: | 0 |
Default value: | None |
Required: | True |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-VMNetworkAdapterName
Specifies the name of the virtual machine network adapter from which the ACL is to be removed.
Type: | String |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Type: | SwitchParameter |
Aliases: | wi |
Position: | Named |
Default value: | False |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Outputs
None by default, Microsoft.HyperV.PowerShell.VMNetworkAdapterAclSetting if PassThru is specified.
Commentaires
https://aka.ms/ContentUserFeedback.
Bientôt disponible : Tout au long de 2024, nous allons supprimer progressivement GitHub Issues comme mécanisme de commentaires pour le contenu et le remplacer par un nouveau système de commentaires. Pour plus d’informations, consultezEnvoyer et afficher des commentaires pour