Remove-NetTransportFilter
Removes transport filters.
Syntax
Remove-NetTransportFilter
[-SettingName <String[]>]
[-Protocol <Protocol[]>]
[-LocalPortStart <UInt16[]>]
[-LocalPortEnd <UInt16[]>]
[-RemotePortStart <UInt16[]>]
[-RemotePortEnd <UInt16[]>]
[-DestinationPrefix <String[]>]
[-AssociatedTCPSetting <CimInstance>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-PassThru]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Remove-NetTransportFilter
-InputObject <CimInstance[]>
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-PassThru]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Description
The Remove-NetTransportFilter cmdlet removes transport filters.
Examples
Example 1: Remove transport filters for a setting name
PS C:\>Remove-NetTransportFilter -SettingName Custom
This command removes all of the transport filters on the server that have the setting name of Custom.
Example 2: Remove transit filters for objects with a specified congestion window
PS C:\>Get-NetTCPSetting -InitialCongestionWindowMss 4 | Remove-NetTransportFilter
This command uses the Get-NetTCPSetting cmdlet to get all of the NetTcpSetting objects that have an initial congestion window of 4 maximum segment size (MSS) units, and then passes them to the current cmdlet by using the pipeline operator. The command removes transport filters for these settings.
Parameters
-AsJob
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-AssociatedTCPSetting
Specifies a NetTCPSetting object. The cmdlet removes transport filters associated with the setting that you specify. To obtain a NetTCPSetting object, use the Get-NetTCPSetting cmdlet.
Type: | CimInstance |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
Type: | CimSession[] |
Aliases: | Session |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
Type: | SwitchParameter |
Aliases: | cf |
Position: | Named |
Default value: | False |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-DestinationPrefix
Specifies an array of destination prefixes of IP routes. The cmdlet removes transport filters that have the prefixes that you specify. A destination prefix consists of an IP address prefix and a prefix length, separated by a slash (/).
Type: | String[] |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-InputObject
Specifies the input object that is used in a pipeline command.
Type: | CimInstance[] |
Position: | Named |
Default value: | None |
Required: | True |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-LocalPortEnd
Specifies an array of upper bounds of ranges of local TCP ports. The cmdlet removes transport filters that have the upper bounds that you specify.
Type: | UInt16[] |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-LocalPortStart
Specifies an array of lower bounds of ranges of local TCP ports. The cmdlet removes transport filters that have the lower bounds that you specify.
Type: | UInt16[] |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-Protocol
Specifies an array of types of routing protocols. The cmdlet removes transport filters based on the protocols that you specify. The acceptable values for this parameter are:
- Bbn
- Bgp
- Dhcp
- Dvmrp
- Egp
- Eigrp
- EsIs
- Ggp
- Hello
- Icmp
- Idpr
- Igrp
- IsIs
- Local
- NetMgmt
- Ospf
- Rip
- Rpl
- Other
Type: | Protocol[] |
Accepted values: | TCP, UDP |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-RemotePortEnd
Specifies an array of upper bounds of ranges of remote TCP ports. The cmdlet removes transport filters that have the upper bounds that you specify.
Type: | UInt16[] |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-RemotePortStart
Specifies an array of lower bounds of ranges of remote TCP ports. The cmdlet removes transport filters that have the lower bounds that you specify.
Type: | UInt16[] |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-SettingName
Specifies an array of setting names. The cmdlet removes transport filters that have the settings that you specify. The acceptable values for this parameter are:
- Internet
- Datacenter
- Compat
- Custom
Type: | String[] |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0
is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Type: | Int32 |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Type: | SwitchParameter |
Aliases: | wi |
Position: | Named |
Default value: | False |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Inputs
The Microsoft.Management.Infrastructure.CimInstance
object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#
) provides the namespace and class name for the underlying WMI object.
Outputs
None