Partager via


Ajouter des serveurs à une batterie de serveurs mise à niveau (Office SharePoint Server)

Mise à jour : 2009-03-05

In this article:

  • Add a front-end Web server to an upgraded server farm
  • Add an application server to an upgraded server farm
  • Add a back-end database server to an upgraded server farm

When you add a front-end Web server or application server to an upgraded farm, you need to install not only the files and components needed by Microsoft Office SharePoint Server 2007, but also any files and components that were needed by Microsoft SharePoint Portal Server 2003. To accomplish this, you can sometimes manage — with the help of a good checklist — to install all of the files and components that you need to get your sites working correctly on a new front-end Web server. However, there are some cases in which installing such components will not work. For example, the Microsoft Office Web Components cannot be installed on a server running Office SharePoint Server 2007. However, if they are already installed when Office SharePoint Server 2007 is installed, they should continue to run.

CautionAttention :

Do not add servers to your farm during the upgrade process. Either add them before beginning the upgrade, or wait until the upgrade is complete to add servers. Specifically, if you add a server to the farm while the SharePoint Products and Technologies Configuration Wizard is being run on any server in the farm, the new server will not appear in the upgraded topology. This is because the configuration database — which contains the information about which servers are in a farm — is the first item upgraded by the configuration wizard, and any servers not included in the configuration wizard at that time will not be registered in the configuration after the upgrade.

Because you need both the previous and the current versions' files and components, the easiest way to add a server to a farm is to take an image of one of the existing servers in your farm (by using any of the tools available for imaging hard disks) and restore it to the new server, then run the SharePoint Products and Technologies Configuration Wizard to add the new server to the farm. This way, you have a snapshot of the upgraded state of the server, complete with any of the files or components you need in order for the sites to render correctly.

ImportantImportant :

Make sure that the image of the server that you use to add a server to a farm has the same software update version applied as all of your Web servers. In server farm deployments, all your Web servers must have the same software update version applied. For more information, see Déployer des mises à jour logicielles pour Office SharePoint Server 2007.

Add a front-end Web server to an upgraded server farm

Perform these steps on a server that has been prepared with an image taken from another front-end Web server in your farm. You can add a front-end Web server by using the SharePoint Products and Technologies Configuration Wizard or the Psconfig command-line tool.

Use the following procedure to use the SharePoint Products and Technologies Configuration Wizard to add a front-end Web server to your upgraded farm.

Add a front-end Web server to an upgraded server farm by using the configuration wizard

  1. Click Start, point to All Programs, point to Administrative Tools, and then click SharePoint Products and Technologies Configuration Wizard.

  2. In the SharePoint Products and Technologies Configuration wizard, on the Welcome to SharePoint Products and Technologies page, click Next.

    A message appears, notifying you that Internet Information Services (IIS), the SharePoint Administration Service, and the SharePoint Timer Service may need to be restarted or reset during configuration.

  3. Click Yes to continue with the wizard.

  4. On the Connect to a server farm page, select Yes, I want to connect to an existing server farm, and then click Next.

  5. On the Specify Configuration Database Settings page, in the Database server box, type the name of the database server used for the farm you are connecting to, and then click Retrieve Database Names.

  6. In the Specify Database Access Account section, type the user name and password to use to connect to Microsoft SQL Server, and then click Next.

    NoteRemarque :

    This account must have rights to create databases. If SQL Server is running on a server that is separate from your front-end Web server, then this account must also be a domain account. This user account must be a member of the following SQL Server security roles: Database Creator and Security Administrator.

  7. In the Completing the SharePoint Products and Technologies Configuration wizard page, verify the settings, and then click Next.

    The configuration wizard runs.

  8. On the Configuration Successful page, review the settings that have been configured, and then click Finish.

Use the following procedure to use the Psconfig command-line tool to add a front-end Web server to your upgraded farm.

Add a front-end Web server to an upgraded server farm by using the command line

  1. Open a command prompt window and change to the following directory:

    %COMMONPROGRAMFILES%\Microsoft Shared\Web server extensions\12\bin

  2. Run the following command:

    psconfig –cmd configdb –connect –server <database_server> -database <database_name>

    Note that the database_name above should be the name of the configuration database for the upgraded farm you want to connect to.

For more information about adding a front-end Web server to your server farm, see Effectuer un déploiement dans une batterie de serveurs simple (Office SharePoint Server).

Add an application server to an upgraded server farm

Perform these steps on a server that has been prepared with an image taken from another application server in your farm. You can add an application server by using the SharePoint Products and Technologies Configuration Wizard or the Psconfig command-line tool.

Use the following procedure to use the SharePoint Products and Technologies Configuration Wizard to add an application server to your upgraded farm.

Add an application server to an upgraded server farm by using the configuration wizard

  1. Click Start, point to All Programs, point to Administrative Tools, and then click SharePoint Products and Technologies Configuration Wizard.

  2. In the SharePoint Products and Technologies Configuration Wizard, on the Welcome to SharePoint Products and Technologies page, click Next.

    A message appears, notifying you that Internet Information Services (IIS), the SharePoint Administration Service, and the SharePoint Timer Service may need to be restarted or reset during configuration.

  3. Click Yes to continue with the wizard.

  4. On the Connect to a server farm page, select Yes, I want to connect to an existing server farm, and then click Next.

  5. On the Specify Configuration Database Settings page, in the Database server box, type the name of the database server used for the farm you are connecting to, and then click Retrieve Database Names.

  6. In the Specify Database Access Account section, type the user name and password to use to connect to SQL Server, and then click Next.

    NoteRemarque :

    This account must have rights to create databases. If SQL Server is running on a server that is separate from your application server, then this account must also be a domain account. This user account must be a member of the following SQL Server security roles: Database Creator and Security Administrator.

  7. On the Completing the SharePoint Products and Technologies Configuration Wizard page, verify the settings, and then click Next.

    The configuration wizard runs.

  8. On the Configuration Successful page, review the settings that have been configured, and then click Finish.

  9. In Central Administration, on the Operations page, click Services on server.

  10. In the Server box, select Change Server, and then in the Select Server box, select the new server.

  11. Under Select server role to display services you will need to start in the table below, select the appropriate role.

  12. If needed, under Start services in the table below, click Start next to any services that are not running.

Use the following procedure to use the Psconfig command-line tool to add an application server to your upgraded farm.

Add an application server to an upgraded server farm by using the command line

  1. Open a command prompt window and change to the following directory:

    %COMMONPROGRAMFILES%\Microsoft Shared\Web server extensions\12\bin

  2. Run the following command:

    psconfig –cmd configdb –connect –server <database_server> -database <database_name>

    Note that the database_name above should be the name of the configuration database for the upgraded farm you want to connect to.

  3. In Central Administration, on the Operations page, click Services on server.

  4. In the Server box, select Change Server, and then in the Select Server box, select the new server.

  5. Under Select server role to display services you will need to start in the table below, select the appropriate role.

  6. If needed, under Start services in the table below, click Start next to any services that are not running.

For more information about adding an application server to your server farm, see Effectuer un déploiement dans une batterie de serveurs simple (Office SharePoint Server).

Add a back-end database server to an upgraded server farm

For a database server, you do not need to use an image from another server in your server farm. You can simply install SQL Server and then join the server to the farm. For more information about adding a database server to your server farm, see Effectuer un déploiement dans une batterie de serveurs simple (Office SharePoint Server).

Download this book

This topic is included in the following downloadable book for easier reading and printing:

See the full list of available books at Downloadable content for Office SharePoint Server 2007.