Connected Standby Duration
This test verifies that the Connected Standby power profile is supported by battery-powered systems.
Test details
Associated requirements |
System.Fundamentals.PowerManagement.CS.ConnectedStandbyDuration |
Platforms |
Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 |
Expected run time |
~300 minutes |
Categories |
Reliability |
Type |
Manual |
Running the test
Before you run the test, complete the test setup as described in the test requirements: WDTF System Fundamentals Testing Prerequisites.
Note
To run the test on a system that has a mobile broadband device, you must turn the mobile broadband radio off (by using the settings on the Wireless menu). The system must be connected to a wireless router. The test will only run with the system under test connected to WiFi only.
Troubleshooting
For troubleshooting information, see Troubleshooting System Fundamentals Testing.
This test returns Pass or Fail. To review test details, review the test log from Windows Hardware Certification Kit (Windows HCK) Studio.
More information
Parameters
DamKey |
The registry key that contains the DAM that is used to determine whether a process should be exempted. Default value: HKLM\System\CurrentControlSet\Control\Session Manager |
DamValue |
The registry value the DAM inspects to determine whether a process should be exempted from suspension. Default value: DamExempted |
EnableDebug |
Configure debug logging. 1 to enable debug logging. Default value: 0 |