Stop-PcsvDevice
Stop-PcsvDevice
Shuts down a remote hardware device.
Syntaxe
Parameter Set: InputObject (cdxml)
Stop-PcsvDevice -InputObject <CimInstance[]> [-AsJob] [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: ByComputerName
Stop-PcsvDevice [-TargetAddress] <String> [-Credential] <PSCredential> [-ManagementProtocol] <ManagementProtocol> [[-Port] <UInt16> ] [-AsJob] [-Authentication <Authentication> ] [-CimSession <CimSession[]> ] [-PassThru] [-SkipCACheck] [-SkipCNCheck] [-SkipRevocationCheck] [-ThrottleLimit <Int32> ] [-TimeoutSec <UInt32> ] [-UseSSL] [-Confirm] [-WhatIf] [ <CommonParameters>]
Description détaillée
The Stop-PcsvDevice cmdlet shuts down a remote hardware device by using Web Services for Management (WS-Management) or Intelligent Platform Management Interface (IPMI). The cmdlet puts the device in the Disabled state, which corresponds to a hard shutdown of the hardware device. Specify the remote hardware device by the management name or IP address, provide credentials necessary to shut down the remote hardware device, and specify which management protocol to use. The credentials must have administrator permissions on the remote hardware device.
Paramètres
-AsJob
Alias |
none |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-Authentication<Authentication>
Specifies an authentication method to use for devices managed by using WS-Management. Do not specify this parameter for devices managed by using IPMI. Les valeurs acceptables pour ce paramètre sont :
-- Basic
-- Digest
-- Default
If you specify Default for this parameter and a value of WSMAN for the ManagementProtocol parameter, the cmdlet uses Basic authentication.
Alias |
none |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
True (ByPropertyName) |
Accepter les caractères génériques ? |
false |
-CimSession<CimSession[]>
Exécute l’applet de commande dans une session à distance ou sur un ordinateur distant. Entrez un nom d’ordinateur ou un objet de session, comme la sortie d’une applet de commande New-CimSession ou Get-CimSession. La valeur par défaut est la session active sur l’ordinateur local.
Alias |
Session |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-Credential<PSCredential>
Specifies a PSCredential object based on a user name and password. To obtain a PSCredential object, use the Get-Credential cmdlet. For more information, type Get-Help Get-Credential
. This parameter specifies the credential for the remote hardware device.
Alias |
none |
Obligatoire ? |
true |
Position ? |
3 |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
True (ByPropertyName) |
Accepter les caractères génériques ? |
false |
-InputObject<CimInstance[]>
Specifies an array of devices, as MSFT_PCSVDevice objects, to manage. To obtain MSFT_PCSVDevice objects, use the Get-PcsvDevice cmdlet.
Alias |
none |
Obligatoire ? |
true |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
True (ByValue) |
Accepter les caractères génériques ? |
false |
-ManagementProtocol<ManagementProtocol>
Specifies a management protocol used to communicate with a device. Les valeurs acceptables pour ce paramètre sont :
-- WSMAN
-- IPMI
Refer to your hardware documentation for supported management protocols.
Specify WSMAN for devices that represent information by using Systems Management Architecture for Server Hardware (SMASH), Desktop and mobile Architecture for System Hardware (DASH), or Physical Computer System View profiles.
Alias |
MP |
Obligatoire ? |
true |
Position ? |
4 |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
True (ByPropertyName) |
Accepter les caractères génériques ? |
false |
-PassThru
Retourne un objet qui représente l’élément avec lequel vous travaillez. Par défaut, cette applet de commande ne génère aucun résultat.
Alias |
none |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-Port<UInt16>
Specifies a port on the remote computer to use for the management connection. If you do not specify a port, the cmdlet uses the following default values:
-- IPMI and WSMAN over HTTP. Port 623.
-- WSMAN over HTTPS. Port 664.
Alias |
none |
Obligatoire ? |
false |
Position ? |
5 |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
True (ByPropertyName) |
Accepter les caractères génériques ? |
false |
-SkipCACheck
Indicates that the client connects by using HTTPS without validating that a trusted CA signed the server certificate. Do not specify this parameter if you specify a value of IPMI for the ManagmentProtocol parameter.
Do not specify this parameter unless you can establish trust in another way, such as if the remote computer is part of a network that is physically secure and isolated, or if the remote computer is a trusted host in a Windows Remote Management (WinRM) configuration.
Alias |
none |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
True (ByPropertyName) |
Accepter les caractères génériques ? |
false |
-SkipCNCheck
Indicates that the certificate CN of the server does not need to match the host name of the server. Do not specify this parameter if you specify a value of IPMI for the ManagmentProtocol parameter.
Specify this parameter only for managing devices by using WS-Management over HTTPS. Be sure to specify this parameter only for trusted computers.
Alias |
none |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
True (ByPropertyName) |
Accepter les caractères génériques ? |
false |
-SkipRevocationCheck
Indicates that the cmdlet skips the revocation check of server certificates. Do not specify this parameter if you specify a value of IPMI for the ManagmentProtocol parameter.
Be sure to specify this parameter only for trusted computers.
Alias |
none |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
True (ByPropertyName) |
Accepter les caractères génériques ? |
false |
-TargetAddress<String>
Specifies the name or IP address of the management port on the remote hardware device. For server hardware, this is typically a dedicated Baseboard Management Controller (BMC) IP address. For other devices, like network switches, this is the IP address of their management port. For desktop and mobile devices, the BMC sometimes shares the same IP address as the computer.
Alias |
CN,ComputerName,IpAddress |
Obligatoire ? |
true |
Position ? |
2 |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
True (ByPropertyName) |
Accepter les caractères génériques ? |
false |
-ThrottleLimit<Int32>
Spécifie le nombre maximal d’opérations simultanées qui peuvent être établies pour exécuter cette applet de commande. Si ce paramètre est omis ou si la valeur 0
est entrée, Windows PowerShell ® calcule une limitation optimale pour l’applet de commande en fonction du nombre d’applets de commande CIM qui s’exécutent sur l’ordinateur. La limitation s’applique seulement à l’applet de commande actuelle, et non pas à la session ni à l’ordinateur.
Alias |
none |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-TimeoutSec<UInt32>
Specifies how long to wait, in seconds, for a response from the remote hardware device. After this period, the cmdlet abandons the connection attempt.
Alias |
none |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
True (ByPropertyName) |
Accepter les caractères génériques ? |
false |
-UseSSL
Indicates that the server connects to the target computer by using SSL. WSMAN encrypts all content transmitted over the network. Specify this parameter to use the additional protection of HTTPS instead of HTTP. If you specify this parameter and SSL is not available on the connection port, the command fails.
Alias |
none |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
True (ByPropertyName) |
Accepter les caractères génériques ? |
false |
-Confirm
Votre confirmation sera requise avant l’exécution de l’applet de commande.
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
false |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-WhatIf
Présente les conséquences éventuelles de l’exécution de l’applet de commande. L’applet de commande n’est pas exécutée.
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
false |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
<CommonParameters>
Cette applet de commande prend en charge les paramètres courants : -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer et -OutVariable. Pour plus d’informations, consultez about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).
Entrées
Le type d’entrée correspond au type des objets que vous pouvez transmettre à l’applet de commande.
Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/HardwareManagement/MSFT_PCSVDevice
A MSFT_PCSVDevice object that is the target for the operation. To obtain a MSFT_PCSVDevice object, use the Get-PcsvDevice cmdlet.
Sorties
Le type de sortie est le type des objets émis par l’applet de commande.
Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/HardwareManagement/MSFT_PCSVDevice
The cmdlet only returns an MSFT_PCSVDevice object if you specify the PassThru parameter.
Exemples
Example 1: Shut down a computer
This example shuts down a computer.
The first command uses the Get-Credential cmdlet to create a credential, and then stores it in the $Credential variable. The cmdlet prompts you for a user name and password. For more information, type Get-Help Get-Credential
.
The second command shuts down the computer that has the management IP address 10.1.12.43 by using the IPMI management protocol. The command specifies the credential object, stored in the $Credential variable, needed to connect to the computer. By default, the cmdlet prompts you before it stops the remote hardware device.
PS C:\> $Credential = Get-Credential
PS C:\>Stop-PcsvDevice -TargetAddress "10.1.12.43" -Credential $Credential -ManagementProtocol IPMI